Refresher tile adhesive pack
Kerakoll's own picture. The pack we stock: 1.5 l.

Kerakoll Tile AdhesiveNo. 25 / 30

Refresher Technical Data Sheet (TDS)

Nourishing wax for the maintenance of continuous floors

Refresher is a maintenance product rather than an installation one, a nourishing wax for continuous floors, meaning seamless surfaces such as resin and cement based finishes that have no joints to hide wear. Those floors lose their appearance gradually across the whole surface, and a wax restores the sheen and gives the finish something to take the abrasion instead of the floor itself.

  • Maintaining continuous floors
  • Restoring sheen on resin floors
  • Periodic floor care
  • Post handover maintenance regimes
Data sheet0.2 MB

Build a list across products and send it once, or ask about Refresher on WhatsApp now.

Consumption
15 ml/m²
Pack we stock
1.5 l
Colour
whitish liquid

About Refresher

Treat it as part of a cleaning regime, applied periodically to a surface that is already clean and dry, not as a repair for a floor that has been damaged. Shelf life is stated as 12 months. On a UAE project, agree the maintenance regime with the client before handover, because a continuous floor cleaned with the wrong products for a year will look worse than the tiling next to it.

Documentation

Related documentation

  • Technical data sheet

    0.2 MB · PDF

    Refresher as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Coats

The sheet calls for 1 to 3.

As published in the data sheet

750ml

  • One coat on a resilient, wood or continuous floor: 15 ml/m2
  • 1 coat
  • over 50 m2

Order 1 pack of 1500 ml bottle

Send this quantity for a quote

Taken from the Refresher data sheet: Coverage: approx. 15 ml/m2 per coat. No site allowance is added unless you turn one on. A nourishing wax, not an adhesive. The application section says to work small areas of about 3 m2 at a time, leave at least an hour to dry, and that a second and a third coat can be applied if necessary in alternate directions, which is why the coats control runs to three.

Application

Where it is used.

  1. 01Maintaining continuous floors
  2. 02Restoring sheen on resin floors
  3. 03Periodic floor care
  4. 04Post handover maintenance regimes

Specification

Technical data.

  • EN 12004 and ISO 13007
Refresher technical specifications from the manufacturer TDS
Coverage≈ 15 ml/m² per coat
Pack size1.5 litre
Colourswhitish liquid
Application temperature+10 deg C to +30 deg C
Consistencywhitish liquid
Storage and shelf life12 months
Product typeNourishing wax for the maintenance of continuous floors

Typical values as Kerakoll prints them in the data sheet for Refresher. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

1.5 litre. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Refresher, a tile adhesive manufactured by Kerakoll. Nourishing wax for the maintenance of continuous floors. Allow 15 ml/m2, as published by the manufacturer. Supplied in 1.5 litre. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Refresher
ProductRefresher
ManufacturerKerakoll
TypeTile Adhesive
Consumption15 ml/m2
Pack size1.5 litre
Unit of measurementm2

Frequently Asked Questions

As per the TDS: ≈ 15 ml/m² per coat

1.5 litre

You can download the official Refresher technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Refresher in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Refresher you need, or describe the job and we will work it out with you.

Chat on WhatsApp