
Kerakoll GroutNo. 26 / 30
Silicone Technical Data Sheet (TDS)
Transparent sealant for tiles and mosaics
Silicone is the transparent sealant in the Kerakoll tiling range, for joints in tile and mosaic work where the sealant should not be seen. Transparent is the honest choice in two situations: against a glass mosaic, where any coloured line reads as a flaw, and on a veined or multicoloured tile that no single sealant colour will match.
- Sealing joints in tile work
- Sealing joints in mosaic
- Perimeter and corner joints
- Glass mosaic joints
- Movement joints in wet areas
Build a list across products and send it once, or ask about Silicone on WhatsApp now.
- Consumption
- 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section
- Pack we stock
- 310 ml cartridge
- Colour
- transparent thixotropic paste
About Silicone
It is supplied in 310 ml cartridges with a 24 month shelf life. The practical point is where sealant belongs. Perimeters, internal corners, changes of plane and movement joints all need a flexible sealant rather than grout, because that is where the tiling has to move. Cut those joints into the setting out at the start. Grouting them solid and sealing over afterwards is what produces the cracked line along a shower wall.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Silicone as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Joint shape
The sheet pairs 10 mm deep with a 10 mm joint.
As published in the data sheet
2,000ml
- Butt or expansion joint, rectangular section, 10 mm wide by 10 mm deep
- 100 ml per metre
- over 20 m of joint
Order 7 packs of 310 ml cartridge
Taken from the Silicone data sheet: Coverage table, linear metres of joints sealable with one 310 ml cartridge of Silicone: 10 mm wide by 10 mm deep gives approx 3 m, 6x5 mm gives approx 10.4 m and 20x20 mm gives approx 0.8 m. Width times depth in millimetres is millilitres per metre, and 310 divided by that section reproduces all 13 printed cells. No site allowance is added unless you turn one on. The sheet prints only the rectangular section; the fillet is half that section by geometry. Its own condition is a width to depth ratio between 1 and 2, so a shallower depth is permitted and the table prints those cells too: the depth preselected here is the deepest printed depth that does not exceed the width, which is the sheet's own worked example of a 1 cm by 1 cm joint. Use a polyethylene foam sub joint such as Joint so the sealant adheres only to the sides. Filed with the grouts in the catalogue but this is a sealant, so it is quoted per linear metre.
Application
Where it is used.
- 01Sealing joints in tile work
- 02Sealing joints in mosaic
- 03Perimeter and corner joints
- 04Glass mosaic joints
- 05Movement joints in wet areas
Where it is not the right product
- Where the joint meets chemicals or constant water, which calls for an epoxy grout
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- EN 13888 and ISO 13007
| Pack size | 310 ml cartridge |
|---|---|
| Colours | transparent thixotropic paste |
| Application temperature | +5 deg C to +40 deg C |
| Consistency | transparent thixotropic paste |
| Storage and shelf life | 24 months |
| Product type | Transparent sealant for tiles and mosaics |
Typical values as Kerakoll prints them in the data sheet for Silicone. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
310 ml cartridge. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
24 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Silicone, a grout manufactured by Kerakoll. Transparent sealant for tiles and mosaics. Allow 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section, as published by the manufacturer. Supplied in 310 ml cartridge. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Silicone |
|---|---|
| Manufacturer | Kerakoll |
| Type | Grout |
| Consumption | 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section |
| Pack size | 310 ml cartridge |
| Unit of measurement | m2 |
Frequently Asked Questions
310 ml cartridge
You can download the official Silicone technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biogel Extreme
R2
View TDS and specifications

Biogel No Limits
C2 TE S1
View TDS and specifications

Delta Plus
View TDS and specifications

Epofill
EN 1504-5
View TDS and specifications

Fuga-Remove
View TDS and specifications

Fuga-Shock
View TDS and specifications
All Tile Adhesives and GroutsEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
A grouting float packs the joint without voids, and a cleaning float takes the haze off before it hardens.
View the range
Peygran
Spacers
The spacer sets the joint width, which decides the grout grade and how much of it the job takes.
View the range
Keiser
Mixing Applications
Mixing to the same water every time is what keeps the colour even from batch to batch.
View the range
Silicone in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Silicone you need, or describe the job and we will work it out with you.