Silicone Color grout pack
Kerakoll's own picture of Silicone Color.

Kerakoll GroutNo. 27 / 30

Silicone Color Technical Data Sheet (TDS)

Decorative sealant for ceramics, mosaics and swimming pools

Silicone Color is the coloured version of the sealant, offered for ceramics, mosaics and swimming pools. The pool rating is the part worth noting, because a sealant in a pool is permanently immersed and under attack from the water treatment, a harder service than a bathroom joint.

  • Sealing joints in ceramics
  • Sealing joints in mosaic
  • Swimming pool joints
  • Colour matched perimeter joints
  • Internal corners in wet areas
Data sheet0.4 MB

Build a list across products and send it once, or ask about Silicone Color on WhatsApp now.

Consumption
100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section
Pack we stock
310 ml cartridge
Colour
Silicone Color

About Silicone Color

Matching the sealant to the grout colour is the point of the range, since the flexible joints at perimeters and internal corners then read as part of the grout pattern instead of a stripe through it. Supplied in 310 ml cartridges with a 24 month shelf life. Order the sealant and the grout together and against the same colour reference. Matching a cartridge to grout already on the wall, on a site where it has dried lighter than the sample, is a job nobody wins.

Documentation

Related documentation

  • Technical data sheet

    0.4 MB · PDF

    Silicone Color as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m

Joint shape

mm
mm

The sheet pairs 10 mm deep with a 10 mm joint.

As published in the data sheet

2,000ml

  • Butt or expansion joint, rectangular section, 10 mm wide by 10 mm deep
  • 100 ml per metre
  • over 20 m of joint

Order 7 packs of 310 ml cartridge

Send this quantity for a quote

Taken from the Silicone Color data sheet: Coverage table, linear metres of joints sealable with one 310 ml cartridge of Silicone Color: 10 mm wide by 10 mm deep gives approx 3 m, 6x5 mm gives approx 10.4 m and 20x20 mm gives approx 0.8 m. Width times depth in millimetres is millilitres per metre, and 310 divided by that section reproduces all 13 printed cells. No site allowance is added unless you turn one on. The sheet prints only the rectangular section; the fillet is half that section by geometry. Its own condition is a width to depth ratio between 1 and 2, so a shallower depth is permitted and the table prints those cells too: the depth preselected here is the deepest printed depth that does not exceed the width, which is the sheet's own worked example of a 1 cm by 1 cm joint. Use a polyethylene foam sub joint such as Joint so the sealant adheres only to the sides. Filed with the grouts in the catalogue but this is a sealant, so it is quoted per linear metre.

Application

Where it is used.

  1. 01Sealing joints in ceramics
  2. 02Sealing joints in mosaic
  3. 03Swimming pool joints
  4. 04Colour matched perimeter joints
  5. 05Internal corners in wet areas

Where it is not the right product

  • Where the joint meets chemicals or constant water, which calls for an epoxy grout

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • EN 13888 and ISO 13007
Silicone Color technical specifications from the manufacturer TDS
Pack size310 ml cartridge
ColoursSilicone Color
Application temperature+5 deg C to +40 deg C
Consistencycoloured thixotropic paste
Storage and shelf life24 months
Product typeDecorative sealant for ceramics, mosaics and swimming pools

Typical values as Kerakoll prints them in the data sheet for Silicone Color. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

310 ml cartridge. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

24 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Silicone Color, a grout manufactured by Kerakoll. Decorative sealant for ceramics, mosaics and swimming pools. Allow 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section, as published by the manufacturer. Supplied in 310 ml cartridge. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Silicone Color
ProductSilicone Color
ManufacturerKerakoll
TypeGrout
Consumption100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section
Pack size310 ml cartridge
Unit of measurementm2

Frequently Asked Questions

310 ml cartridge

You can download the official Silicone Color technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Silicone Color in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Silicone Color you need, or describe the job and we will work it out with you.

Chat on WhatsApp