
Kerakoll GroutNo. 28 / 30
Silmat Color Technical Data Sheet (TDS)
Ultra-matt, elastic decorative sealant
Silmat Color is an elastic decorative sealant with an ultra matt finish, which is a deliberate choice rather than a detail. A standard silicone cures to a slight sheen, and on matt porcelain, honed stone or a microcement wall that sheen catches the light and draws the eye to exactly the line you wanted to disappear.
- Sealing joints in matt finishes
- Perimeter and corner joints
- Movement joints in tiling
- Joints alongside honed stone
- Decorative colour matched joints
Build a list across products and send it once, or ask about Silmat Color on WhatsApp now.
- Consumption
- 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section
- Pack we stock
- 290 ml cartridge
- Colour
- Silmat Color
About Silmat Color
A matt sealant does not. It stays elastic, so it still does the work a sealed joint has to do, taking the movement that would crack a grouted one. Supplied in 290 ml cartridges, a different size from the 310 ml silicones in the range, with a 24 month shelf life. Specify it wherever the tile or wall finish is matt, and check it against the actual material, because matt levels vary from one finish to another.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Silmat Color as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Joint shape
The sheet pairs 10 mm deep with a 10 mm joint.
As published in the data sheet
2,000ml
- Butt or expansion joint, rectangular section, 10 mm wide by 10 mm deep
- 100 ml per metre
- over 20 m of joint
Order 7 packs of 290 ml cartridge
Taken from the Silmat Color data sheet: Coverage table, linear metres of joints sealable with one 290 ml cartridge of Silmat Color: 10 mm wide by 10 mm deep gives approx 2.9 m, 8x8 mm gives approx 4.5 m and 30x15 mm gives approx 0.6 m. Width times depth in millimetres is millilitres per metre, and 290 divided by that section reproduces 13 of the 14 printed cells. No site allowance is added unless you turn one on. The sheet prints only the rectangular section; the fillet is half that section by geometry. Its own condition is a width to depth ratio between 1 and 2, so a shallower depth is permitted and the table prints those cells too: the depth preselected here is the deepest printed depth that does not exceed the width, which is the sheet's own worked example of a 1 cm by 1 cm joint. Use a polyethylene foam sub joint such as Joint so the sealant adheres only to the sides. Filed with the grouts in the catalogue but this is a sealant, so it is quoted per linear metre. The one cell that does not reproduce is 6 mm wide by 5 mm deep, printed as approx 11.6 m where 290 ml over a 30 mm2 section gives 9.7 m; every other cell is exact, so that figure looks like a misprint.
Application
Where it is used.
- 01Sealing joints in matt finishes
- 02Perimeter and corner joints
- 03Movement joints in tiling
- 04Joints alongside honed stone
- 05Decorative colour matched joints
Where it is not the right product
- As a waterproofing layer, because it is a finish and needs a membrane beneath it in wet areas
- Over a substrate that is unsound, moving or uneven, which will telegraph through the finish
- Where the joint meets chemicals or constant water, which calls for an epoxy grout
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- EN 13888 and ISO 13007
| Pack size | 290 ml cartridge |
|---|---|
| Colours | Silmat Color |
| Application temperature | +5 deg C to +40 deg C |
| Consistency | Coloured thixotropic paste |
| Storage and shelf life | 24 months |
| Product type | Ultra-matt, elastic decorative sealant |
Typical values as Kerakoll prints them in the data sheet for Silmat Color. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
290 ml cartridge. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
24 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Silmat Color, a grout manufactured by Kerakoll. Ultra-matt, elastic decorative sealant. Allow 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section, as published by the manufacturer. Supplied in 290 ml cartridge. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Silmat Color |
|---|---|
| Manufacturer | Kerakoll |
| Type | Grout |
| Consumption | 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section |
| Pack size | 290 ml cartridge |
| Unit of measurement | m2 |
Frequently Asked Questions
290 ml cartridge
You can download the official Silmat Color technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biogel Extreme
R2
View TDS and specifications

Biogel No Limits
C2 TE S1
View TDS and specifications

Delta Plus
View TDS and specifications

Epofill
EN 1504-5
View TDS and specifications

Fuga-Remove
View TDS and specifications

Fuga-Shock
View TDS and specifications
All Tile Adhesives and GroutsEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
A grouting float packs the joint without voids, and a cleaning float takes the haze off before it hardens.
View the range
Peygran
Spacers
The spacer sets the joint width, which decides the grout grade and how much of it the job takes.
View the range
Keiser
Mixing Applications
Mixing to the same water every time is what keeps the colour even from batch to batch.
View the range
Silmat Color in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Silmat Color you need, or describe the job and we will work it out with you.