Mapefix VE SF sealant pack
Mapei's own picture of Mapefix VE SF.

Mapei SealantNo. 02 / 17

Mapefix VE SF Technical Data Sheet (TDS)

Mapei sealant.

Mapefix VE SF is the styrene free vinylester chemical anchor in the Mapefix range, supplied in 300 and 420 ml twin compartment cartridges that mix through the static mixer as they are extruded, with no pre mixing. Two printed limits decide whether it is the right grade.

  • Strengthening rods in construction joints
  • Immersed anchors and anchors in permanently damp environments
  • Anchors in marine and industrial environments subject to chemical attack
  • Overhead crane and tram rails
  • Plant and sanitary equipment, aerials, signs and pylons
  • Safety barriers
Data sheet1.1 MB

Build a list across products and send it once, or ask about Mapefix VE SF on WhatsApp now.

Pack we stock
Boxes of 12 cartridges of 300 ml or 420 ml, with 12 static mixers
Colour
Light grey

Mapei document 05802 · revision 09-2024

About Mapefix VE SF

It is certified to ETA option 1, ETA rebar, fire and seismic performance class C1, so a job calling for class C2 is not this product. And it must not be used in diamond tipped cored holes, where the sheet sends the installer to Mapefix EP 50 or EP 100. What it does take is threaded rod and deformed bar in non cracked concrete, lightweight and cellular concrete, masonry, brick, stone and wood, down to minus 10 degrees C, on damp and immersed work, and in poorly ventilated spaces because it carries no styrene.

Documentation

Related documentation

  • Technical data sheet

    Revision 09-2024 · 1.1 MB · PDF

    Mapefix VE SF as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Revision 5-2026 · 0.2 MB · PDF

    For the method statement and the site file.

    Download
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

As published in the data sheet

Consumption is by the volume of the hole and the sheet prints no rate at all under CONSUMPTION, only the words According to the size of hole to be filled. What sets that volume is a schedule of drilled holes, their diameter, the embedment depth and the diameter of the bar sitting in them, and those are in Mapei attachment tables 2 and 5, published separately on mapei.com and not in this PDF. The sheet says a qualified design engineer must calculate the hole size, the anchor depth and the maximum permitted loads. A round hole with a bar already in it is not a chase of a given length, width and depth, so there is no honest sum to put on this page. Once the engineer has fixed the hole schedule, the resin density of 1.77 g per cubic centimetre turns the empty volume around each bar into kilogrammes. Supplied in 300 ml and 420 ml cartridges, boxes of twelve with twelve static mixers.

There is no area calculator for Mapefix VE SF because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.

Application

Where it is used.

  1. 01Strengthening rods in construction joints
  2. 02Immersed anchors and anchors in permanently damp environments
  3. 03Anchors in marine and industrial environments subject to chemical attack
  4. 04Overhead crane and tram rails
  5. 05Plant and sanitary equipment, aerials, signs and pylons
  6. 06Safety barriers

Specification

Technical data.

  • ISO 11600
Mapefix VE SF technical specifications from the manufacturer TDS
Pack sizeBoxes of 12 cartridges of 300 ml or 420 ml, with 12 static mixers
ColoursLight grey
Application temperaturefrom -10°C to +35°C
Consistencythixotropic paste
Storage and shelf life300 ml cartridges 12 months, 420 ml cartridges 18 months, in the original packaging at between +5°C and +25°C
Density1.77 g/cm3
Service temperaturefrom -40°C to +80°C, provisionally up to +120°C
Compressive strength100 N/mm2 (EN 196-1)
Flexural strength15 N/mm2 (EN 196-1)
Modulus of elasticity14000 N/mm2 (EN 196-1)
Resistance to uv raysgood
Chemical resistancevery good
Resistance to waterexcellent (EN 12390-8)
CertificationETA option 1 for anchors in concrete in tension or compression zones, ETA rebar for supplementary reinforcement, fire certification, and ETA seismic performance class C1
ConsumptionAccording to the size of hole to be filled

Typical values as Mapei prints them in the data sheet for Mapefix VE SF. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

Boxes of 12 cartridges of 300 ml or 420 ml, with 12 static mixers. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

300 ml cartridges 12 months, 420 ml cartridges 18 months, in the original packaging at between +5°C and +25°C in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapefix VE SF, a sealant manufactured by Mapei. Supplied in boxes of 12 cartridges of 300 ml or 420 ml, with 12 static mixers. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapefix VE SF
ProductMapefix VE SF
ManufacturerMapei
TypeSealant
Pack sizeBoxes of 12 cartridges of 300 ml or 420 ml, with 12 static mixers
Unit of measurementm2

Frequently Asked Questions

Boxes of 12 cartridges of 300 ml or 420 ml, with 12 static mixers

You can download the official Mapefix VE SF technical data sheet as a PDF directly from this page, revision 09-2024, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapefix VE SF in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefix VE SF you need, or describe the job and we will work it out with you.

Chat on WhatsApp