
Mapei SealantNo. 07 / 17
Mapeflex PS NS Technical Data Sheet (TDS)
Mapei sealant.
Mapeflex PS NS is the non sag grade of the Mapei multi component polysulphide joint sealant, printed on the sheet as Mapeflex PSU NS ME. It is gunned into vertical and horizontal joints and holds its shape on a face, where the sister grade PSU SL ME is poured and self levels into floors.
- Movement joints in buildings, industrial floors and car parks
- Joints in structural concrete, brickwork and retaining walls
- Vertical and horizontal joints in reservoirs and other water retaining structures
- Joints in basements and subways
- High rise facade joints where access for future maintenance is difficult
- Infrastructure project joints
Build a list across products and send it once, or ask about Mapeflex PS NS on WhatsApp now.
- Consumption
- 200 ml per metre of 20 by 10 mm joint, butt or expansion joint, rectangular section
- Pack we stock
- 4 l
- Colour
- pre-tinted grey or black
Mapei document 00449 · revision 10-2025
About Mapeflex PS NS
It cures to a tough rubber like seal that accommodates continuous and pronounced cyclic movement of plus or minus 25 per cent. The deciding line on the sheet is that only the non sag grade may be used in reservoirs and other water retaining structures, vertical or horizontal. Shore A hardness is 23 to 28 and pot life 90 minutes at 25 degrees, against 120 for the pouring grade. Porous joint faces are primed with Mapeflex PSU PS ME. Joints run 5 to 50 mm wide at a 2 to 1 width to depth ratio.
Documentation
Related documentation
Technical data sheet
Revision 10-2025 · 0.4 MB · PDF
Mapeflex PS NS as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Joint shape
The sheet pairs 10 mm deep with a 20 mm joint.
As published in the data sheet
4,000ml
- Butt or expansion joint, rectangular section, 20 mm wide by 10 mm deep
- 200 ml per metre
- over 20 m of joint
Order 1 pack of 4000 ml pack of A plus B (4 litres)
Taken from the Mapeflex PS NS data sheet: CONSUMPTION: litres per linear metre, 0.050 for a 10 x 5 mm joint, 0.200 for 20 x 10 mm, 0.800 for 40 x 20 mm and 1.250 for 50 x 25 mm. No site allowance is added unless you turn one on. All 4 printed cells reproduce exactly: a litre per metre is 1000 ml of joint section, so 20 x 10 mm is 0.200 litres. The sheet allows joints from 5 to 50 mm wide, asks for a 2 to 1 width to depth ratio, and sets minimum depths of 5 mm on metals, glass and other non porous surfaces, 10 mm on all porous surfaces and 20 mm on trafficked joints and joints under hydrostatic pressure. This is the gun grade NS ME, supplied in 4 litre A plus B packs, against 5 litres for the pouring grade SL ME; density is 1.55 to 1.66 kg per litre. Porous joint faces need a coat of Mapeflex PSU PS ME primer, which is a separate 1 litre line.
Application
Where it is used.
- 01Movement joints in buildings, industrial floors and car parks
- 02Joints in structural concrete, brickwork and retaining walls
- 03Vertical and horizontal joints in reservoirs and other water retaining structures
- 04Joints in basements and subways
- 05High rise facade joints where access for future maintenance is difficult
- 06Infrastructure project joints
Specification
Technical data.
- ISO 11600
| Coverage | Litres per linear metre: 0.050 for a 10x5 mm joint, 0.200 for 20x10 mm, 0.800 for 40x20 mm and 1.250 for 50x25 mm. |
|---|---|
| Joint width | 5 to 50 mm wide, designed to a width to depth ratio of 2:1 |
| Pack size | 4 l composite pack containing components A and B |
| Pot life | 90 minutes at +25°C |
| Set to light foot traffic | 18 hours at +25°C, 12 hours at +35°C |
| Colours | pre-tinted grey or black |
| Application temperature | from +5°C to +50°C |
| Storage and shelf life | Shelf life of 12 months in original unopened containers. Store in dry conditions in the enclosed warehouse at temperatures not exceeding 25 °C. |
| Shore hardness | 23-28 Shore A at +25°C |
| Movement accommodation factor | +/- 25% |
| Cure time | 1 week at +25°C, 4 days at +35°C |
| Density | 1.55 - 1.66 kg/l |
| Dry solids | 100% |
| Voc content | 0% |
Typical values as Mapei prints them in the data sheet for Mapeflex PS NS. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
4 l composite pack containing components A and B. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Working time
90 minutes at +25°C. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Shelf life of 12 months in original unopened containers. Store in dry conditions in the enclosed warehouse at temperatures not exceeding 25 °C. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeflex PS NS, a sealant manufactured by Mapei. Allow 200 ml per metre of 20 by 10 mm joint, butt or expansion joint, rectangular section, as published by the manufacturer. Supplied in 4 l composite pack containing components a and b. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeflex PS NS |
|---|---|
| Manufacturer | Mapei |
| Type | Sealant |
| Consumption | 200 ml per metre of 20 by 10 mm joint, butt or expansion joint, rectangular section |
| Pack size | 4 l composite pack containing components A and B |
| Set time | 18 hours at +25°C, 12 hours at +35°C |
| Pot life | 90 minutes at +25°C |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Litres per linear metre: 0.050 for a 10x5 mm joint, 0.200 for 20x10 mm, 0.800 for 40x20 mm and 1.250 for 50x25 mm.
4 l composite pack containing components A and B
You can download the official Mapeflex PS NS technical data sheet as a PDF directly from this page, revision 10-2025, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Mapefix EP 100
View TDS and specifications

Mapefix VE SF
View TDS and specifications

Mapeflex AC4
ification of
View TDS and specifications

Mapeflex Express 80/400
View TDS and specifications

Mapeflex MS 45
F
View TDS and specifications

Mapeflex MS Crystal
F
View TDS and specifications
All Sealants and AnchoringEvery Mapei product and the distributor page
Mapeflex PS NS in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeflex PS NS you need, or describe the job and we will work it out with you.
