
Mapei SealantNo. 08 / 17
Mapeflex PSU SL ME Technical Data Sheet (TDS)
Mapei sealant.
Mapeflex PSU SL ME is the self levelling grade of a multi component polysulphide joint sealant, poured into horizontal joints in floors and other level surfaces where the level tolerance is within 3 per cent, rather than gunned onto a vertical face. Polysulphide gives a tough rubber like seal that accommodates continuous and pronounced cyclic movement of plus or minus 25 per cent, which is why the range is specified for movement joints in buildings, industrial floors, car parks, subways and infrastructure work.
- Pouring into movement joints in floors and horizontal surfaces
- Movement joints in buildings and infrastructure projects
- Industrial floor joints
- Car park joints
- Subway and civil engineering joints
- Trafficked joints designed to around 20 mm wide
Build a list across products and send it once, or ask about Mapeflex PSU SL ME on WhatsApp now.
- Consumption
- 200 ml per metre of 20 by 10 mm joint, butt or expansion joint, rectangular section
- Pack we stock
- 5 l
- Colour
- grey
Mapei document 00448 · revision 10-2025
About Mapeflex PSU SL ME
Joints from 5 to 50 mm wide can be sealed, and trafficked joints or those under hydrostatic pressure should be designed to around 20 mm. Shore A hardness runs from 17 to 22 and pot life is 120 minutes at 25 degrees. For a water retaining structure the non sag grade is specified instead of this one.
Documentation
Related documentation
Technical data sheet
Revision 10-2025 · 0.4 MB · PDF
Mapeflex PSU SL ME as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Joint shape
The sheet pairs 10 mm deep with a 20 mm joint.
As published in the data sheet
4,000ml
- Butt or expansion joint, rectangular section, 20 mm wide by 10 mm deep
- 200 ml per metre
- over 20 m of joint
Order 1 pack of 5000 ml pack of A plus B (5 litres)
Taken from the Mapeflex PSU SL ME data sheet: CONSUMPTION: litres per linear metre, 0.050 for a 10 x 5 mm joint, 0.200 for 20 x 10 mm, 0.800 for 40 x 20 mm and 1.250 for 50 x 25 mm. No site allowance is added unless you turn one on. All 4 printed cells reproduce exactly: a litre per metre is 1000 ml of joint section, so 20 x 10 mm is 0.200 litres. The sheet allows joints from 5 to 50 mm wide, asks for a 2 to 1 width to depth ratio, and sets minimum depths of 5 mm on metals, glass and other non porous surfaces, 10 mm on all porous surfaces and 20 mm on trafficked joints and joints under hydrostatic pressure. The pouring grade SL ME comes in 5 litre A plus B packs; the gun grade NS ME in 4 litre packs; density is 1.55 to 1.66 kg per litre.
Application
Where it is used.
- 01Pouring into movement joints in floors and horizontal surfaces
- 02Movement joints in buildings and infrastructure projects
- 03Industrial floor joints
- 04Car park joints
- 05Subway and civil engineering joints
- 06Trafficked joints designed to around 20 mm wide
Specification
Technical data.
- ISO 11600
| Coverage | Litres per linear metre: 0.050 for a 10x5 mm joint, 0.200 for 20x10 mm, 0.800 for 40x20 mm and 1.250 for 50x25 mm. Joints may be between 5 and 50 mm wide. |
|---|---|
| Pack size | 5 l |
| Pot life | 120 minutes at +25°C |
| Set to light foot traffic | 18 hours at +25°C |
| Colours | grey |
| Application temperature | from +5°C to +50°C |
| Storage and shelf life | Shelf life of 12 months in original unopened containers. Store in dry conditions in the enclosed warehouse at temperatures not exceeding 25 °C. |
| Shore hardness | 17-22 Shore A at +25°C |
Typical values as Mapei prints them in the data sheet for Mapeflex PSU SL ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 l. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Working time
120 minutes at +25°C. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Shelf life of 12 months in original unopened containers. Store in dry conditions in the enclosed warehouse at temperatures not exceeding 25 °C. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeflex PSU SL ME, a sealant manufactured by Mapei. Allow 200 ml per metre of 20 by 10 mm joint, butt or expansion joint, rectangular section, as published by the manufacturer. Supplied in 5 l. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeflex PSU SL ME |
|---|---|
| Manufacturer | Mapei |
| Type | Sealant |
| Consumption | 200 ml per metre of 20 by 10 mm joint, butt or expansion joint, rectangular section |
| Pack size | 5 l |
| Set time | 18 hours at +25°C |
| Pot life | 120 minutes at +25°C |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Litres per linear metre: 0.050 for a 10x5 mm joint, 0.200 for 20x10 mm, 0.800 for 40x20 mm and 1.250 for 50x25 mm. Joints may be between 5 and 50 mm wide.
5 l
You can download the official Mapeflex PSU SL ME technical data sheet as a PDF directly from this page, revision 10-2025, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Mapefix EP 100
View TDS and specifications

Mapefix VE SF
View TDS and specifications

Mapeflex AC4
ification of
View TDS and specifications

Mapeflex Express 80/400
View TDS and specifications

Mapeflex MS 45
F
View TDS and specifications

Mapeflex MS Crystal
F
View TDS and specifications
All Sealants and AnchoringEvery Mapei product and the distributor page
Mapeflex PSU SL ME in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeflex PSU SL ME you need, or describe the job and we will work it out with you.
