
Mapei SealantNo. 09 / 17
Mapeflex PU 45 FT Technical Data Sheet (TDS)
Sealant to F.
Heavy traffic is where Mapeflex PU 45 FT earns its place: a paintable, rapid, high modulus polyurethane sealant and adhesive for expansion and distribution joints in horizontal and vertical surfaces, including joints occasionally attacked by hydrocarbons. Movement capability is 20 per cent of joint width, classified F20 HM to ISO 11600, and the application list is explicit about traffic, covering industrial floors taking heavy vehicles, car parks, supermarkets, shopping centres and warehouses, and ceramic floors where fork lifts run.
- Expansion and distribution joints in industrial floors with heavy traffic
- Car park, supermarket and warehouse floor joints
- Ceramic floors in areas where fork lifts run
- Concrete walls and vertical structures needing a thixotropic sealant
- Sealing cracks and general fillet joints
- Flexible bonding of building elements up to 3 mm
Build a list across products and send it once, or ask about Mapeflex PU 45 FT on WhatsApp now.
- Class
- F
- Consumption
- 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section
- Pack we stock
- 600 ml
- Colour
- 000 White, 111 Grey, 113 Dark Grey
Mapei document 08102
About Mapeflex PU 45 FT
Its thixotropic consistency lets it hold in a vertical joint as well. Used as an adhesive up to 3 mm it bonds cement based materials, brick, metals, glass, gypsum, wood, ceramics and plastics. Shore A hardness is 40 and cartridges are 600 ml. Rapid hardening shortens the time a joint has to stay closed to site traffic.
Documentation
Related documentation
Technical data sheet
1.3 MB · PDF
Mapeflex PU 45 FT as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Joint shape
The sheet pairs 10 mm deep with a 10 mm joint.
As published in the data sheet
2,000ml
- Butt or expansion joint, rectangular section, 10 mm wide by 10 mm deep
- 100 ml per metre
- over 20 m of joint
Order 7 packs of 300 ml cartridge
Taken from the Mapeflex PU 45 FT data sheet: CONSUMPTION TABLE: linear metres per cartridge, 12 m at 5 x 5 mm, 3 m at 10 x 10 mm, 2 m at 15 x 10 mm, 1.5 m at 20 x 10 mm, 0.9 m at 25 x 12.5 mm and 0.6 m at 30 x 15 mm. No site allowance is added unless you turn one on. Also supplied in 600 ml cartridges, boxes of 20, where the same table prints 24, 6, 4, 3, 1.9 and 1.3 m. All 6 printed rows of the 300 ml column and all 6 of the 600 ml column reproduce as the pack size divided by the joint section, rounded down. Used as an adhesive instead of a sealant, the sheet gives no rate at all: it depends on whether the product is applied in beads or spots.
Application
Where it is used.
- 01Expansion and distribution joints in industrial floors with heavy traffic
- 02Car park, supermarket and warehouse floor joints
- 03Ceramic floors in areas where fork lifts run
- 04Concrete walls and vertical structures needing a thixotropic sealant
- 05Sealing cracks and general fillet joints
- 06Flexible bonding of building elements up to 3 mm
Where it is not the right product
- On external walls, where a cementitious plaster is required
- In bathrooms, kitchens or any permanently wet area
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- F
- ISO 11600
| Classification | EN 15651-1: F-EXT-INT-CC, class 20 HM; EN 15651-4: PW-EXT-INT-CC |
|---|---|
| Pack size | 600 ml |
| Colours | 000 White, 111 Grey, 113 Dark Grey |
| Consistency | thixotropic paste |
| Storage and shelf life | Mapeflex PU 45 FT may be stored for 12 months in a cool, dry place in its sealed, original packaging. |
| Density | 1.39 g/cm³ |
| Dry solids | 100% |
| Tensile strength | after 28 days at 23°C and 50% R.H.: 3.8 N/mm² |
| Shore hardness | 40 (DIN 53505) |
Typical values as Mapei prints them in the data sheet for Mapeflex PU 45 FT. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
600 ml. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Mapeflex PU 45 FT may be stored for 12 months in a cool, dry place in its sealed, original packaging. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeflex PU 45 FT, a sealant manufactured by Mapei, classified F. Allow 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section, as published by the manufacturer. Supplied in 600 ml. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeflex PU 45 FT |
|---|---|
| Manufacturer | Mapei |
| Type | Sealant |
| Classification | F |
| Consumption | 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section |
| Pack size | 600 ml |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapeflex PU 45 FT is classified F according to ISO 11600, as stated in the manufacturer's technical data sheet.
600 ml
You can download the official Mapeflex PU 45 FT technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Mapefix EP 100
View TDS and specifications

Mapefix VE SF
View TDS and specifications

Mapeflex AC4
ification of
View TDS and specifications

Mapeflex Express 80/400
View TDS and specifications

Mapeflex MS 45
F
View TDS and specifications

Mapeflex MS Crystal
F
View TDS and specifications
All Sealants and AnchoringEvery Mapei product and the distributor page
Mapeflex PU 45 FT in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeflex PU 45 FT you need, or describe the job and we will work it out with you.
