Mapeflex PU 65 sealant pack
Mapei's own picture. The pack we stock: 8.55 kg.

Mapei SealantNo. 10 / 17

Mapeflex PU 65 Technical Data Sheet (TDS)

Mapei sealant.

Mapeflex PU 65 is a two component castable polyurethane elastomeric sealant for road joints finished flush with the surface, developed for highway construction joints and for filling and sealing the anchoring heads of pre-formed rubber, reinforced rubber and steel road joints between adjacent decks and between deck and abutment. It is a trafficked product in the fullest sense, suitable for vehicles on roads, freeways and highways, and it also serves as a connection sealant between a prefabricated road joint and the adjoining bituminous conglomerate.

  • Highway construction joints finished flush with the surface
  • Filling and sealing anchoring heads of pre-formed road joints
  • Joints between adjacent decks and between deck and abutment
  • Connection sealant between road joints and bituminous conglomerate
  • Surface sealing of anchoring bolts in pre-formed rubber sections
  • Road, railway and airport joints
Data sheet1.1 MB

Build a list across products and send it once, or ask about Mapeflex PU 65 on WhatsApp now.

Pack we stock
8.55 kg
Colour
black

Mapei document 00424

About Mapeflex PU 65

Shore A hardness of 80 is the figure that sets it apart: this is for substrates subject to limited movement and heavy load rather than a flexing building joint. Set to foot traffic takes about 2 to 3 hours, the application range is 0 to 35 degrees, and mineral fillers may be added after mixing.

Documentation

Related documentation

  • Technical data sheet

    1.1 MB · PDF

    Mapeflex PU 65 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

As published in the data sheet

The sheet publishes a density and nothing else: 1.2 kg per litre of components A and B. It prints no joint table and no width to depth rule, so there is no sheet figure to size a joint from. The joint volume in litres, which is the width times the depth in millimetres times the length divided by 1000, times 1.2 gives the kilogrammes, and it is supplied in 10 kg drums of A plus B. It can be extended with Quartz 0.50 up to 1 to 1 by weight, which changes the quantity again.

There is no area calculator for Mapeflex PU 65 because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.

Application

Where it is used.

  1. 01Highway construction joints finished flush with the surface
  2. 02Filling and sealing anchoring heads of pre-formed road joints
  3. 03Joints between adjacent decks and between deck and abutment
  4. 04Connection sealant between road joints and bituminous conglomerate
  5. 05Surface sealing of anchoring bolts in pre-formed rubber sections
  6. 06Road, railway and airport joints

Specification

Technical data.

  • ISO 11600
Mapeflex PU 65 technical specifications from the manufacturer TDS
Coverage1.2 kg per litre (only components A+B).
Pack size8.55 kg, 1.45 kg
Set to light foot trafficset to foot traffic approx. 2-3 hours (normal setting)
Coloursblack
Application temperaturefrom 0°C to +35°C
Consistencypourable paste
Storage and shelf lifeMapeflex PU 65 may be stored up to 12 months in a cool, dry place. Component B must be kept above +5°C, below which it tends to crystallise.
Density1.23 g/cm³
Elongation250%
Shore hardness80 (DIN 53505), components A+B

Typical values as Mapei prints them in the data sheet for Mapeflex PU 65. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

8.55 kg, 1.45 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

Mapeflex PU 65 may be stored up to 12 months in a cool, dry place. Component B must be kept above +5°C, below which it tends to crystallise. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Mapeflex PU 65, a sealant manufactured by Mapei. Supplied in 8.55 kg, 1.45 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Mapeflex PU 65
ProductMapeflex PU 65
ManufacturerMapei
TypeSealant
Pack size8.55 kg, 1.45 kg
Set timeset to foot traffic approx. 2-3 hours (normal setting)
Unit of measurementm2

Frequently Asked Questions

As per the TDS: 1.2 kg per litre (only components A+B).

8.55 kg, 1.45 kg

You can download the official Mapeflex PU 65 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Mapeflex PU 65 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeflex PU 65 you need, or describe the job and we will work it out with you.

Chat on WhatsApp