
Mapei SealantNo. 05 / 17
Mapeflex MS 45 Technical Data Sheet (TDS)
Sealant to F.
Mapeflex MS 45 is a one component hybrid sealant and adhesive based on silylated polymer, classified F20 HM to ISO 11600, so it carries movement up to 20 per cent of joint width at a high modulus. Trafficked joints are within its scope, including civil and industrial floors subject to heavy vehicular traffic, and that is the dividing line between it and an acrylic sealant.
- Expansion, fillet and distribution joints on floors and walls
- Civil and industrial floors with heavy vehicular traffic
- Traditional and ventilated facades
- Window and door fittings
- Tin roofs and metalwork
- Flexible bonding of building elements at 3 mm thickness
Build a list across products and send it once, or ask about Mapeflex MS 45 on WhatsApp now.
- Class
- F
- Consumption
- 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section
- Pack we stock
- 300 ml
- Colour
- 113 Grey, White
Mapei document 00428
About Mapeflex MS 45
It also seals traditional and ventilated facades, window and door fittings, cracks and splits, paintable joints, tin roofs and metalwork, and it tolerates damp substrates. Used as a flexible adhesive at 3 mm it bonds most building materials without primer, from metals and glass to ceramics and many plastics, replacing or supplementing mechanical fasteners. Shore A hardness is 43, applied between 5 and 35 degrees. Mould resistant and EMICODE EC1 Plus, supplied in 300 ml cartridges.
Documentation
Related documentation
Technical data sheet
1.1 MB · PDF
Mapeflex MS 45 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Joint shape
The sheet pairs 10 mm deep with a 10 mm joint.
As published in the data sheet
2,000ml
- Butt or expansion joint, rectangular section, 10 mm wide by 10 mm deep
- 100 ml per metre
- over 20 m of joint
Order 7 packs of 300 ml cartridge
Taken from the Mapeflex MS 45 data sheet: CONSUMPTION TABLE: linear metres per cartridge, 12 m at 5 x 5 mm, 3 m at 10 x 10 mm, 2 m at 15 x 10 mm, 1.5 m at 20 x 10 mm, 0.9 m at 25 x 12.5 mm and 0.6 m at 30 x 15 mm. No site allowance is added unless you turn one on. Also supplied in 600 ml sausages, boxes of 20. All 6 printed rows of the 300 ml table reproduce as 300 divided by the joint section, rounded down. Used as an adhesive instead of a sealant, the sheet gives no rate at all: it depends on whether the product is applied in beads or spots.
Application
Where it is used.
- 01Expansion, fillet and distribution joints on floors and walls
- 02Civil and industrial floors with heavy vehicular traffic
- 03Traditional and ventilated facades
- 04Window and door fittings
- 05Tin roofs and metalwork
- 06Flexible bonding of building elements at 3 mm thickness
Specification
Technical data.
- F
- ISO 11600
- EMICODE EC1 Plus - very low emission
| Classification | EN 15651-1: F-EXT-INT-CC, class 20 HM |
|---|---|
| Pack size | 300 ml |
| Colours | 113 Grey, White |
| Application temperature | from +5°C to +35°C |
| Consistency | thixotropic paste |
| Storage and shelf life | Mapeflex MS 45 may be stored for up to 15 months (300 ml cartridges) and 12 months (600 ml sausages) in its original packaging in a dry, cool place. |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.50 g/cm³ |
| Dry solids | 100% |
| Tensile strength | after 28 days at +23°C: 1.50 N/mm² |
| Shore hardness | 43 (DIN 53505) |
Typical values as Mapei prints them in the data sheet for Mapeflex MS 45. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
300 ml. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Mapeflex MS 45 may be stored for up to 15 months (300 ml cartridges) and 12 months (600 ml sausages) in its original packaging in a dry, cool place. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeflex MS 45, a sealant manufactured by Mapei, classified F. Allow 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section, as published by the manufacturer. Supplied in 300 ml. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeflex MS 45 |
|---|---|
| Manufacturer | Mapei |
| Type | Sealant |
| Classification | F |
| Consumption | 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section |
| Pack size | 300 ml |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapeflex MS 45 is classified F according to ISO 11600, as stated in the manufacturer's technical data sheet.
300 ml
You can download the official Mapeflex MS 45 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Mapefix EP 100
View TDS and specifications

Mapefix VE SF
View TDS and specifications

Mapeflex AC4
ification of
View TDS and specifications

Mapeflex Express 80/400
View TDS and specifications

Mapeflex MS Crystal
F
View TDS and specifications

Mapeflex PS NS
View TDS and specifications
All Sealants and AnchoringEvery Mapei product and the distributor page
Mapeflex MS 45 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeflex MS 45 you need, or describe the job and we will work it out with you.
