
Mapei SealantNo. 06 / 17
Mapeflex MS Crystal Technical Data Sheet (TDS)
Sealant to F.
Mapeflex MS Crystal does the same work as the other hybrid sealants while staying invisible: a crystal clear, high modulus, paintable sealant and adhesive that seals and bonds without changing the appearance of what it is used on. Movement capability is 20 per cent of joint width, classified F20 HM to ISO 11600, which suits facades, internal and glass partition walls, the gap between skirting boards and floors, window and door fittings and shower booths.
- Transparent seals in facades and internal partition walls
- Glass partition walls and shower booths
- Filling gaps between skirting boards and floors
- Window and door fittings
- Bonding glass shelves, tops and glass objects
- Fillet and expansion joints with movement up to 20%
Build a list across products and send it once, or ask about Mapeflex MS Crystal on WhatsApp now.
- Class
- F
- Consumption
- 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section
- Pack we stock
- 300 ml
- Colour
- crystal clear
Mapei document 00444
About Mapeflex MS Crystal
It is not a trafficked floor sealant. As an elastic adhesive, a thin layer bonds glass shelves, tops and objects along with cement based materials, brick, metals, gypsum, wood, ceramic and many plastics, and it accepts damp surfaces. Shore hardness is 35, applied between 5 and 40 degrees, EMICODE EC1 Plus, supplied in 300 ml cartridges with an 18 month shelf life.
Documentation
Related documentation
Technical data sheet
1.4 MB · PDF
Mapeflex MS Crystal as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Joint shape
The sheet pairs 10 mm deep with a 10 mm joint.
As published in the data sheet
2,000ml
- Butt or expansion joint, rectangular section, 10 mm wide by 10 mm deep
- 100 ml per metre
- over 20 m of joint
Order 7 packs of 300 ml cartridge
Taken from the Mapeflex MS Crystal data sheet: CONSUMPTION TABLE: linear metres per cartridge, 12 m at 5 x 5 mm, 3 m at 10 x 10 mm, 2 m at 15 x 10 mm, 1.5 m at 20 x 10 mm, 0.9 m at 25 x 12.5 mm and 0.6 m at 30 x 15 mm. No site allowance is added unless you turn one on. All 6 printed rows reproduce as 300 divided by the joint section, rounded down. Supplied in boxes of 12 cartridges. Used as an adhesive instead of a sealant, the sheet gives no rate at all: it depends on whether the product is applied in beads or spots.
Application
Where it is used.
- 01Transparent seals in facades and internal partition walls
- 02Glass partition walls and shower booths
- 03Filling gaps between skirting boards and floors
- 04Window and door fittings
- 05Bonding glass shelves, tops and glass objects
- 06Fillet and expansion joints with movement up to 20%
Where it is not the right product
- On external walls, where a cementitious plaster is required
- In bathrooms, kitchens or any permanently wet area
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- F
- ISO 11600
- EMICODE EC1 Plus - very low emission
| Classification | EN 15651-1: F-EXT-INT; EN 15651-3: XS1 |
|---|---|
| Coverage | Used as a sealant: According to the size of the joint. See consumption table below: Size of joint in mm Metres 300 ml. cartridge 5 x 5 12 10 x 10 3 15 x 10 2 20 x 10 1.5 25 x 12.5 0.9 30 x 15 0.6 Used as an adhesive: According to the bonding technique used (spot bonding or in beads). Cleaning Remove |
| Pack size | 300 ml |
| Colours | crystal clear |
| Application temperature | from +5°C to +40°C |
| Consistency | thixotropic paste |
| Storage and shelf life | Mapeflex MS Crystal may be stored for 18 months in its original packaging in a cool, dry area at +5°C to +25°C and 50% R.H. |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.00 g/cm³ |
| Tensile strength | after 7 days at +23°C: 1.5 |
| Shore hardness | 35 (ISO 868) |
Typical values as Mapei prints them in the data sheet for Mapeflex MS Crystal. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
300 ml. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Mapeflex MS Crystal may be stored for 18 months in its original packaging in a cool, dry area at +5°C to +25°C and 50% R.H. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeflex MS Crystal, a sealant manufactured by Mapei, classified F. Allow 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section, as published by the manufacturer. Supplied in 300 ml. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeflex MS Crystal |
|---|---|
| Manufacturer | Mapei |
| Type | Sealant |
| Classification | F |
| Consumption | 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section |
| Pack size | 300 ml |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapeflex MS Crystal is classified F according to ISO 11600, as stated in the manufacturer's technical data sheet.
As per the TDS: Used as a sealant: According to the size of the joint. See consumption table below: Size of joint in mm Metres 300 ml. cartridge 5 x 5 12 10 x 10 3 15 x 10 2 20 x 10 1.5 25 x 12.5 0.9 30 x 15 0.6 Used as an adhesive: According to the bonding technique used (spot bonding or in beads). Cleaning Remove
300 ml
You can download the official Mapeflex MS Crystal technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Mapefix EP 100
View TDS and specifications

Mapefix VE SF
View TDS and specifications

Mapeflex AC4
ification of
View TDS and specifications

Mapeflex Express 80/400
View TDS and specifications

Mapeflex MS 45
F
View TDS and specifications

Mapeflex PS NS
View TDS and specifications
All Sealants and AnchoringEvery Mapei product and the distributor page
Mapeflex MS Crystal in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeflex MS Crystal you need, or describe the job and we will work it out with you.
