
Mapei SealantNo. 11 / 17
Mapeflex PU 70 SL Technical Data Sheet (TDS)
Mapei sealant.
Fuel is the deciding factor with Mapeflex PU 70 SL, a two component free flowing elastic polyurethane sealant poured into expansion and contraction joints in concrete floors that come into accidental or intermittent contact with petrol, diesel, aviation spirit, lubricants and de-icing substances. It is a horizontal product, poured into joints with a slope of up to 2.5 per cent, and the joint has to be designed so that movement in service stays within 25 per cent of its initial width.
- Joints in concrete floors in contact with fuels and lubricants
- Sealing joints in runways
- Joints in car parks, service areas and mechanical workshops
- Joints in roads, courtyards, ports and logistics areas
- Run off tanks in refineries and fuel storage depots
- Petrochemical industry flooring joints
Build a list across products and send it once, or ask about Mapeflex PU 70 SL on WhatsApp now.
- Consumption
- 200 ml per metre of 20 by 10 mm joint, butt or expansion joint, rectangular section
- Pack we stock
- 6.6 kg
- Colour
- 120 Black
Mapei document 00447
About Mapeflex PU 70 SL
Runways, car parks, service areas, mechanical workshops, roads, courtyards, ports and logistics areas with moving vehicles are its ground, along with run off tanks in refineries, fuel depots and petrochemical plants. Components mix at 66 to 34 by weight, Shore A hardness is 18, and Mapefoam backer cord sets the depth of the sealant.
Documentation
Related documentation
Technical data sheet
1.0 MB · PDF
Mapeflex PU 70 SL as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Joint shape
The sheet pairs 10 mm deep with a 20 mm joint.
As published in the data sheet
4,000ml
- Butt or expansion joint, rectangular section, 20 mm wide by 10 mm deep
- 200 ml per metre
- over 20 m of joint
Taken from the Mapeflex PU 70 SL data sheet: CONSUMPTION: consumption of sealant in kg per metre, 0.04 at 5 x 5 mm, 0.15 at 10 x 10 mm, 0.29 at 20 x 10 mm, 0.65 at 30 x 15 mm and 1.16 at 40 x 20 mm, with a density of 1.45 g per cm3. No site allowance is added unless you turn one on. The calculator gives the joint volume in millilitres. The sheet's own kilogrammes are that volume times its printed density of 1.45 g per cm3, and all 8 printed kg per metre cells reproduce that way. It is sold in 10 kg kits of A plus B, for which the sheet prints 276, 69, 46, 34, 22, 15, 11 and 9 metres across those eight joint sizes, so divide the litres by 6.9 for kits. Primer PU60 is a separate line at a tenth of the sealant, 0.013 kg per metre at 10 x 10 mm. The printed rates are theoretical and carry no waste.
Application
Where it is used.
- 01Joints in concrete floors in contact with fuels and lubricants
- 02Sealing joints in runways
- 03Joints in car parks, service areas and mechanical workshops
- 04Joints in roads, courtyards, ports and logistics areas
- 05Run off tanks in refineries and fuel storage depots
- 06Petrochemical industry flooring joints
Specification
Technical data.
- ISO 11600
| Coverage | The density of Mapeflex PU 70 SL is 1.45 g/cm³. Consumption depends on the width and depth of the joint; see the consumption table on the data sheet. |
|---|---|
| Pack size | 6.6 kg, 3.4 kg |
| Set to light foot traffic | 10 h |
| Colours | 120 Black |
| Mixing ratio | component A : component B = 66 : 34 |
| Application temperature | +5°C to +35°C |
| Consistency | component A thick paste, component B liquid |
| Storage and shelf life | 12 months in its original sealed containers at a temperature between +5°C and +35°C. Protect from frost. |
| Shore hardness | 18 (Shore A) |
| Density | 1.60 g/cm³ 1.25 g/cm³ |
| Dry solids | 97% 100% |
| Tensile strength | 0.6 N/mm² |
Typical values as Mapei prints them in the data sheet for Mapeflex PU 70 SL. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
6.6 kg, 3.4 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
component A : component B = 66 : 34. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
12 months in its original sealed containers at a temperature between +5°C and +35°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeflex PU 70 SL, a sealant manufactured by Mapei. Allow 200 ml per metre of 20 by 10 mm joint, butt or expansion joint, rectangular section, as published by the manufacturer. Mix at component A : component B = 66 : 34. Supplied in 6.6 kg, 3.4 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeflex PU 70 SL |
|---|---|
| Manufacturer | Mapei |
| Type | Sealant |
| Consumption | 200 ml per metre of 20 by 10 mm joint, butt or expansion joint, rectangular section |
| Pack size | 6.6 kg, 3.4 kg |
| Mixing ratio | component A : component B = 66 : 34 |
| Set time | 10 h |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: The density of Mapeflex PU 70 SL is 1.45 g/cm³. Consumption depends on the width and depth of the joint; see the consumption table on the data sheet.
6.6 kg, 3.4 kg
You can download the official Mapeflex PU 70 SL technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Mapefix EP 100
View TDS and specifications

Mapefix VE SF
View TDS and specifications

Mapeflex AC4
ification of
View TDS and specifications

Mapeflex Express 80/400
View TDS and specifications

Mapeflex MS 45
F
View TDS and specifications

Mapeflex MS Crystal
F
View TDS and specifications
All Sealants and AnchoringEvery Mapei product and the distributor page
Mapeflex PU 70 SL in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeflex PU 70 SL you need, or describe the job and we will work it out with you.
