
Mapei SealantNo. 12 / 17
Mapeflex PU S25 Technical Data Sheet (TDS)
Sealant to F.
Mapeflex PU S25 is a low modulus elastic polyurethane sealant developed for internal and external vertical expansion and construction joints, classified F-25 LM to ISO 11600. Low modulus is the selection point: it carries movement up to 25 per cent of joint width while putting very little stress back into the joint edge, with a modulus of elasticity of 0.20 N per square millimetre, which suits weaker or brittle substrates that a high modulus sealant would tear away.
- Internal and external vertical expansion joints
- Construction joints subject to movement up to 25%
- Joints on weaker or brittle substrate edges
- Paintable joints after preliminary testing
- Joints in facades and around masonry openings
Build a list across products and send it once, or ask about Mapeflex PU S25 on WhatsApp now.
- Class
- F
- Consumption
- 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section
- Pack we stock
- 600 ml
- Colour
- Beige, Grey, White
Mapei document 433
About Mapeflex PU S25
Its thixotropic consistency makes it quick to gun on a vertical face, and it can be painted over once hardened, subject to preliminary tests. Shore A hardness is 20, the working range 5 to 40 degrees, and cartridges hold 600 ml in beige, grey and white. For a trafficked floor joint choose a high modulus polyurethane instead of this one.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Mapeflex PU S25 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Joint shape
The sheet pairs 10 mm deep with a 10 mm joint.
As published in the data sheet
2,000ml
- Butt or expansion joint, rectangular section, 10 mm wide by 10 mm deep
- 100 ml per metre
- over 20 m of joint
Order 4 packs of 600 ml sausage
Taken from the Mapeflex PU S25 data sheet: CONSUMPTION FOR 600 ML CARTRIDGE: 24 m at 5 x 5 mm, 6 m at 10 x 10 mm, 5.3 m at 15 x 7.5 mm, 3 m at 20 x 10 mm, 1.9 m at 25 x 12.5 mm and 1.3 m at 30 x 15 mm. No site allowance is added unless you turn one on. All 6 printed rows reproduce as 600 divided by the joint section. Note the sheet pairs 15 mm wide with only 7.5 mm deep, not the 10 mm its sister products use. Supplied in boxes of 24 sausages.
Application
Where it is used.
- 01Internal and external vertical expansion joints
- 02Construction joints subject to movement up to 25%
- 03Joints on weaker or brittle substrate edges
- 04Paintable joints after preliminary testing
- 05Joints in facades and around masonry openings
Specification
Technical data.
- F
- ISO 11600
| Classification | ISO 11600: class F-25 LM |
|---|---|
| Coverage | The consumption of Mapeflex PU S25 varies according to the size of the joint. See the table below for consumption of the product: CONSUMPTION FOR 600 ML CARTRIDGE Size of the joint in mm Metres 5 x 5 24 10 x 10 6 15 x 7.5 5.3 20 x 10 3 25 x 12.5 1.9 30 x 15 1.3 Cleaning Mapeflex PU S25 may be remove |
| Pack size | 600 ml |
| Colours | Beige, Grey, White |
| Application temperature | from +5°C to +40°C |
| Consistency | thixotropic paste |
| Storage and shelf life | Mapeflex PU S25 may be stored for up to 12 months in a cool, dry place (5°C to 25°C - 50% R.H.). |
| Density | 1.25 g/cm³ |
| Dry solids | 99 % |
| Tensile strength | 1.0 N/mm² |
| Shore hardness | 20 (DIN 53505) |
Typical values as Mapei prints them in the data sheet for Mapeflex PU S25. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
600 ml. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Mapeflex PU S25 may be stored for up to 12 months in a cool, dry place (5°C to 25°C - 50% R.H.). in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapeflex PU S25, a sealant manufactured by Mapei, classified F. Allow 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section, as published by the manufacturer. Supplied in 600 ml. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapeflex PU S25 |
|---|---|
| Manufacturer | Mapei |
| Type | Sealant |
| Classification | F |
| Consumption | 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section |
| Pack size | 600 ml |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapeflex PU S25 is classified F according to ISO 11600, as stated in the manufacturer's technical data sheet.
As per the TDS: The consumption of Mapeflex PU S25 varies according to the size of the joint. See the table below for consumption of the product: CONSUMPTION FOR 600 ML CARTRIDGE Size of the joint in mm Metres 5 x 5 24 10 x 10 6 15 x 7.5 5.3 20 x 10 3 25 x 12.5 1.9 30 x 15 1.3 Cleaning Mapeflex PU S25 may be remove
600 ml
You can download the official Mapeflex PU S25 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Mapefix EP 100
View TDS and specifications

Mapefix VE SF
View TDS and specifications

Mapeflex AC4
ification of
View TDS and specifications

Mapeflex Express 80/400
View TDS and specifications

Mapeflex MS 45
F
View TDS and specifications

Mapeflex MS Crystal
F
View TDS and specifications
All Sealants and AnchoringEvery Mapei product and the distributor page
Mapeflex PU S25 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapeflex PU S25 you need, or describe the job and we will work it out with you.
