
Mapei SealantNo. 13 / 17
Mapesil AC Technical Data Sheet (TDS)
Sealant to ified as.
Mapesil AC is a pure acetic cross linking silicone sealant with BioBlock technology, mould resistant and rated for movement up to 25 per cent of the initial joint size to EN 15651. It bonds directly to glass, ceramics and stainless steel and to certain plastics and rubbers, and reaches concrete, wood, mineral substrates and oxidisable metals through the Mapei Primerseal adhesion promoters.
- Expansion, contraction and fillet joints with movement up to 25%
- Sealing glass, ceramics and stainless steel
- Waterproof seals between construction elements
- Sanitary and glazing joints
- Colour matched joints alongside tile grout
- Seals in mechanical engineering and manufacturing
Build a list across products and send it once, or ask about Mapesil AC on WhatsApp now.
- Class
- ified as
- Consumption
- 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section
- Pack we stock
- 310 ml
- Colour
- 150, 163, 176, 189
Mapei document 08139
About Mapesil AC
What it is not is a floor sealant: for joints subject to heavy traffic the data sheet directs you to a polyurethane or epoxy product instead. Within that limit it forms flexible, waterproof seals in expansion, contraction and fillet joints across building, mechanical engineering and manufacturing work. Shore A hardness is 20, cartridges hold 310 ml, and the range runs to 48 colours plus transparent, so a joint can be matched to the grout beside it.
Documentation
Related documentation
Technical data sheet
1.2 MB · PDF
Mapesil AC as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Joint shape
The sheet pairs 10 mm deep with a 10 mm joint.
As published in the data sheet
2,000ml
- Butt or expansion joint, rectangular section, 10 mm wide by 10 mm deep
- 100 ml per metre
- over 20 m of joint
Order 7 packs of 310 ml cartridge
Taken from the Mapesil AC data sheet: CONSUMPTION: consumption varies depending on the joint size. The printed expansion joint table runs from 25 ml per linear metre at 5 x 5 mm to 1000 ml at 50 x 20 mm, with a 310 ml cartridge yielding 3.1 m at 10 x 10 mm. No site allowance is added unless you turn one on. Width times depth in millimetres is the millilitres per linear metre exactly, with no constant. All 10 printed expansion joint rows, all 7 printed fillet rows and all 10 printed 310 ml cartridge yields reproduce, 27 of 27 cells. The depth is the sheet's own: equal to the width up to 10 mm, 10 mm for widths of 10 to 20 mm, then half the width capped at 20 mm. Cartridges come in boxes of 12. On absorbent substrates the sheet also calls for Mapei Primerseal A or M at 100 to 300 g/m2, at a primer volume of no more than 5 percent of the sealant volume.
Application
Where it is used.
- 01Expansion, contraction and fillet joints with movement up to 25%
- 02Sealing glass, ceramics and stainless steel
- 03Waterproof seals between construction elements
- 04Sanitary and glazing joints
- 05Colour matched joints alongside tile grout
- 06Seals in mechanical engineering and manufacturing
Specification
Technical data.
- ified as
- ISO 11600
- EMICODE EC1 Plus - very low emissions
| Classification | EN 15651-1, EN 15651-2, EN 15651-3, EN 15651-4 |
|---|---|
| Coverage | Mapesil AC: consumption varies depending on the joint size. Some examples of consumption for expansion, contraction and fillet joints are shown in the table below. Mapei Primerseal A/Mapei Primerseal M: between 100 and 300 g/m². For the treatment of absorbent substrates, a volume of primer not excee |
| Pack size | 310 ml |
| Colours | 150, 163, 176, 189 |
| Consistency | thixotropic paste |
| Storage and shelf life | Mapesil AC may be stored up to 24 months in its original cartridges, in a dry and clean place. Mapei Primerseal A or Mapei Primerseal M, stored in a cool (not above +25°C) and dry place in the original closed bottles, have a shelf life of 15 months. |
| EMICODE | EC1 Plus - very low emissions |
| Density | 1.03 g/cm³ (transparent) |
| Dry solids | 100% |
| Elongation | 800% |
| Tensile strength | 1.6 N/mm² |
| Shore hardness | 20 (ISO 868) |
Typical values as Mapei prints them in the data sheet for Mapesil AC. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
310 ml. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Mapesil AC may be stored up to 24 months in its original cartridges, in a dry and clean place. Mapei Primerseal A or Mapei Primerseal M, stored in a cool (not above +25°C) and dry place in the original closed bottles, have a shelf life of 15 months. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapesil AC, a sealant manufactured by Mapei, classified ified as. Allow 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section, as published by the manufacturer. Supplied in 310 ml. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapesil AC |
|---|---|
| Manufacturer | Mapei |
| Type | Sealant |
| Classification | ified as |
| Consumption | 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section |
| Pack size | 310 ml |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapesil AC is classified ified as according to ISO 11600, as stated in the manufacturer's technical data sheet.
As per the TDS: Mapesil AC: consumption varies depending on the joint size. Some examples of consumption for expansion, contraction and fillet joints are shown in the table below. Mapei Primerseal A/Mapei Primerseal M: between 100 and 300 g/m². For the treatment of absorbent substrates, a volume of primer not excee
310 ml
You can download the official Mapesil AC technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Mapefix EP 100
View TDS and specifications

Mapefix VE SF
View TDS and specifications

Mapeflex AC4
ification of
View TDS and specifications

Mapeflex Express 80/400
View TDS and specifications

Mapeflex MS 45
F
View TDS and specifications

Mapeflex MS Crystal
F
View TDS and specifications
All Sealants and AnchoringEvery Mapei product and the distributor page
Mapesil AC in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapesil AC you need, or describe the job and we will work it out with you.
