
Mapei SealantNo. 14 / 17
Mapesil LM Technical Data Sheet (TDS)
Sealant to ification according to EN 15651-1: F-EXT-INT-CC.
Stone is the reason Mapesil LM exists: a neutral, solvent free silicone with a low modulus of elasticity, formulated so that no surface bleeding or plasticiser migration can stain marble, granite, sandstone or quartz. The same chemistry suits brick, cellular concrete and varnished or enamelled wood, and it generally bonds without primer to glass, ceramic, enamelled surfaces, metals and many plastics as well as to absorbent mineral substrates such as concrete and render.
- Sealing joints in marble, granite, sandstone and quartz
- Joints in brick, cellular concrete and enamelled wood
- Prefabricated panel joints
- Window and door frames and wall openings
- Joints between pipes and vertical walls
- Floors with limited pedestrian traffic
Build a list across products and send it once, or ask about Mapesil LM on WhatsApp now.
- Class
- ification according to EN 15651-1: F-EXT-INT-CC
- Consumption
- 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section
- Pack we stock
- 310 ml
- Colour
- 100, 110, 111, 112, 113, 114, 120, 130
Mapei document 00408
About Mapesil LM
Maximum movement in service is 25 per cent of joint width with an elongation modulus of 0.35 N per square millimetre, covering prefabricated panels, window and door frames, pipes against vertical walls and joints between cladding elements, indoors and out. Traffic is the limit: floors with light pedestrian use only, and a polyurethane for anything busier. Shore A hardness is 21, in 310 ml cartridges.
Documentation
Related documentation
Technical data sheet
1.2 MB · PDF
Mapesil LM as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Joint shape
The sheet pairs 10 mm deep with a 10 mm joint.
As published in the data sheet
2,000ml
- Butt or expansion joint, rectangular section, 10 mm wide by 10 mm deep
- 100 ml per metre
- over 20 m of joint
Order 7 packs of 310 ml cartridge
Taken from the Mapesil LM data sheet: JOINT SIZING AND CONSUMPTION: metres of product per cartridge, 12 m at 5 x 5 mm, 3 m at 10 x 10 mm, 1.5 m at 20 x 10 mm and 0.4 m at 40 x 20 mm. No site allowance is added unless you turn one on. The printed yields are 310 ml divided by the joint section: all 8 butt rows reproduce, and 3 of the 4 fillet rows. The 15 mm fillet row prints 3 m where the section gives 2.8 m, so that one row of the sheet is about 8 percent optimistic. Cartridges come in self supporting boxes of 12.
Application
Where it is used.
- 01Sealing joints in marble, granite, sandstone and quartz
- 02Joints in brick, cellular concrete and enamelled wood
- 03Prefabricated panel joints
- 04Window and door frames and wall openings
- 05Joints between pipes and vertical walls
- 06Floors with limited pedestrian traffic
Specification
Technical data.
- ification according to EN 15651-1: F-EXT-INT-CC
- ISO 11600
- EMICODE EC1 Plus - very low emissions
| Classification | EN 15651-1: F-EXT-INT-CC |
|---|---|
| Pack size | 310 ml |
| Colours | 100, 110, 111, 112, 113, 114, 120, 130 |
| Consistency | thixotropic paste |
| Storage and shelf life | Mapesil LM can be stored up to 18 months in its original cartridges, in a dry and clean place. |
| EMICODE | EC1 Plus - very low emissions |
| Density | 1.02 g/cm³ |
| Dry solids | 100% |
| Elongation | 250% |
| Tensile strength | 0.5 N/mm² |
| Shore hardness | 21 (DIN 53505) |
Typical values as Mapei prints them in the data sheet for Mapesil LM. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
310 ml. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Mapesil LM can be stored up to 18 months in its original cartridges, in a dry and clean place. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapesil LM, a sealant manufactured by Mapei, classified ification according to EN 15651-1: F-EXT-INT-CC. Allow 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section, as published by the manufacturer. Supplied in 310 ml. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapesil LM |
|---|---|
| Manufacturer | Mapei |
| Type | Sealant |
| Classification | ification according to EN 15651-1: F-EXT-INT-CC |
| Consumption | 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section |
| Pack size | 310 ml |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapesil LM is classified ification according to EN 15651-1: F-EXT-INT-CC according to ISO 11600, as stated in the manufacturer's technical data sheet.
310 ml
You can download the official Mapesil LM technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Mapefix EP 100
View TDS and specifications

Mapefix VE SF
View TDS and specifications

Mapeflex AC4
ification of
View TDS and specifications

Mapeflex Express 80/400
View TDS and specifications

Mapeflex MS 45
F
View TDS and specifications

Mapeflex MS Crystal
F
View TDS and specifications
All Sealants and AnchoringEvery Mapei product and the distributor page
Mapesil LM in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapesil LM you need, or describe the job and we will work it out with you.
