
Mapei SealantNo. 15 / 17
Mapesil Z Plus Technical Data Sheet (TDS)
Sealant to ification according to EN 15651-1: F-EXT-INT-CC.
Mapesil Z Plus is a mould resistant acetic silicone sealant for sanitary fittings and permanently damp environments, forming waterproof seals and joints between construction elements in building, mechanical, naval, automotive and industrial work. Once polymerised it bonds well to glass, ceramic and painted metal and strongly resists mould growth, which is what keeps a bathroom joint from blackening within a season.
- Mould resistant seals in bathrooms, kitchens and laundry rooms
- Sealing sanitary fittings, bath tubs, showers and saunas
- Sealing between glass and window frames
- Sealing U profile glass
- Sealing greenhouses
- Seals in permanently damp environments
Build a list across products and send it once, or ask about Mapesil Z Plus on WhatsApp now.
- Class
- ification according to EN 15651-1: F-EXT-INT-CC
- Consumption
- 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section
- Pack we stock
- 280 ml
- Colour
- 113 Grey, Transparent, White
Mapei document 00423
About Mapesil Z Plus
Maximum permitted movement in service is 12.5 per cent, so it is a sanitary and glazing sealant rather than a structural movement joint product, and it is not for traffic. Typical work is bathrooms, kitchens, laundry rooms, baths, showers and saunas, greenhouses, U profile glass, joints between glass and window frames, and air and water vents. Skin forms in 25 minutes, Shore A hardness is 18 and cartridges hold 280 ml.
Documentation
Related documentation
Technical data sheet
0.9 MB · PDF
Mapesil Z Plus as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Joint shape
The sheet pairs 10 mm deep with a 10 mm joint.
As published in the data sheet
2,000ml
- Butt or expansion joint, rectangular section, 10 mm wide by 10 mm deep
- 100 ml per metre
- over 20 m of joint
Order 8 packs of 280 ml cartridge
Taken from the Mapesil Z Plus data sheet: COVERAGE TABLE (linear metres per cartridge): butt joint 11 m at 5 x 5 mm, 2.8 m at 10 x 10 mm, 1.4 m at 20 x 10 mm and 0.4 m at 40 x 20 mm. No site allowance is added unless you turn one on. All 7 printed butt rows and all 4 printed triangular rows reproduce as 280 divided by the joint section, 11 of 11 cells. The cartridge is 280 ml here, not the 310 ml of the rest of the Mapesil range, and comes in boxes of 12.
Application
Where it is used.
- 01Mould resistant seals in bathrooms, kitchens and laundry rooms
- 02Sealing sanitary fittings, bath tubs, showers and saunas
- 03Sealing between glass and window frames
- 04Sealing U profile glass
- 05Sealing greenhouses
- 06Seals in permanently damp environments
Specification
Technical data.
- ification according to EN 15651-1: F-EXT-INT-CC
- ISO 11600
- EMICODE EC1 Plus - very low emission
| Classification | EN 15651-1: F-EXT-INT-CC; EN 15651-3: XS1 |
|---|---|
| Pack size | 280 ml |
| Open time | formation of skin: 25 minutes |
| Colours | 113 Grey, Transparent, White |
| Application temperature | from +5°C to +40°C |
| Consistency | thixotropic paste |
| Storage and shelf life | 18 months in its original packaging in a dry place at a temperature between +5°C/+25°C. |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.00 g/cm³ |
| Tensile strength | 0.6 N/mm² (according to ISO 8339) |
| Shore hardness | 18 (ISO 868) |
Typical values as Mapei prints them in the data sheet for Mapesil Z Plus. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
280 ml. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
18 months in its original packaging in a dry place at a temperature between +5°C/+25°C. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapesil Z Plus, a sealant manufactured by Mapei, classified ification according to EN 15651-1: F-EXT-INT-CC. Allow 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section, as published by the manufacturer. Supplied in 280 ml. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapesil Z Plus |
|---|---|
| Manufacturer | Mapei |
| Type | Sealant |
| Classification | ification according to EN 15651-1: F-EXT-INT-CC |
| Consumption | 100 ml per metre of 10 by 10 mm joint, butt or expansion joint, rectangular section |
| Pack size | 280 ml |
| Open time | formation of skin: 25 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Mapesil Z Plus is classified ification according to EN 15651-1: F-EXT-INT-CC according to ISO 11600, as stated in the manufacturer's technical data sheet.
280 ml
You can download the official Mapesil Z Plus technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Mapefix EP 100
View TDS and specifications

Mapefix VE SF
View TDS and specifications

Mapeflex AC4
ification of
View TDS and specifications

Mapeflex Express 80/400
View TDS and specifications

Mapeflex MS 45
F
View TDS and specifications

Mapeflex MS Crystal
F
View TDS and specifications
All Sealants and AnchoringEvery Mapei product and the distributor page
Mapesil Z Plus in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapesil Z Plus you need, or describe the job and we will work it out with you.
