
Mapei Flooring AdhesiveNo. 17 / 17
Ultrabond MS Rapid Technical Data Sheet (TDS)
Mapei flooring adhesive.
Ultrabond MS Rapid is a one component silylated polymer assembly adhesive with high initial tack, the so called sucker effect, and rapid final hardening, used to bond and assemble building components instead of or alongside mechanical fasteners. It works internally and externally and on damp substrates, bonding cement based materials, brick, stone, wood, metals, painted surfaces, ceramics, glass and rigid and flexible plastics.
- Bonding internal and external window ledges and stone sills
- Bonding skirting, parquet and cable trunking
- Bonding insulating and soundproofing panels
- Fixing roofing tiles and prefabricated elements
- Bonding Idrostop Soft hydro-expansive jointing strip
- Replacing or supplementing mechanical fasteners
Build a list across products and send it once, or ask about Ultrabond MS Rapid on WhatsApp now.
- Consumption
- 50 ml per metre of 10 by 10 mm joint
- Pack we stock
- 290 ml
- Colour
- white
Mapei document 00431
About Ultrabond MS Rapid
Typical work is internal and external window ledges and stone sills, balcony elements, skirting, parquet, cable trunking, insulating and soundproofing panels, roofing tiles, door surrounds and prefabricated elements, and it is specifically recommended for bonding Idrostop Soft hydro-expansive jointing strip when waterproofing second pours. Adjustment time is five minutes, so position the component promptly. A 290 ml cartridge gives about 5 metres of a 10 by 10 mm triangular bead.
Documentation
Related documentation
Technical data sheet
0.9 MB · PDF
Ultrabond MS Rapid as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet pairs 10 mm deep with a 10 mm joint.
As published in the data sheet
500ml
- Triangular bead, 10 mm wide by 10 mm deep
- 50 ml per metre
- over 10 m of joint
Order 2 packs of 290 ml cartridge
Taken from the Ultrabond MS Rapid data sheet: CONSUMPTION: according to the bonding technique used (spot bonding or in beads). A 290 ml cartridge forms a bead of adhesive with a 10 mm base x 10 mm high triangular section around 5 metres long. No site allowance is added unless you turn one on. The sheet's own yield, 5 metres from a 290 ml cartridge, works out at about 58 ml per metre, where a 10 mm by 10 mm triangular bead is 50 ml per metre, so the sheet is the more conservative of the two. The sheet also allows spot bonding, for which it publishes no rate, and says to apply the adhesive in layers no more than 2 to 3 mm thick. Also supplied in 600 ml soft cartridges.
Application
Where it is used.
- 01Bonding internal and external window ledges and stone sills
- 02Bonding skirting, parquet and cable trunking
- 03Bonding insulating and soundproofing panels
- 04Fixing roofing tiles and prefabricated elements
- 05Bonding Idrostop Soft hydro-expansive jointing strip
- 06Replacing or supplementing mechanical fasteners
Specification
Technical data.
- EMICODE EC1 Plus - very low emission
| Coverage | According to the bonding technique used (spot bonding or in beads). A 290 ml cartridge forms a bead of adhesive with a 10 mm base x 10 mm high triangular section around 5 metres long. |
|---|---|
| Pack size | 290 ml |
| Adjustment time | 5’ |
| Colours | white |
| Application temperature | from +5°C to +35°C |
| Consistency | thixotropic paste |
| Storage and shelf life | Ultrabond MS Rapid 290 ml cartridges may be stored for up to 18 months in a cool, dry place, while 600 ml soft cartridges may be stored for up to 12 months. |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.50 ± 0.03 g/cm³ |
| Dry solids | 100% |
Typical values as Mapei prints them in the data sheet for Ultrabond MS Rapid. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
290 ml. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Ultrabond MS Rapid 290 ml cartridges may be stored for up to 18 months in a cool, dry place, while 600 ml soft cartridges may be stored for up to 12 months. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultrabond MS Rapid, a flooring adhesive manufactured by Mapei. Allow 50 ml per metre of 10 by 10 mm joint, as published by the manufacturer. Supplied in 290 ml. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultrabond MS Rapid |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Consumption | 50 ml per metre of 10 by 10 mm joint |
| Pack size | 290 ml |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: According to the bonding technique used (spot bonding or in beads). A 290 ml cartridge forms a bead of adhesive with a 10 mm base x 10 mm high triangular section around 5 metres long.
290 ml
You can download the official Ultrabond MS Rapid technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Mapefix EP 100
View TDS and specifications

Mapefix VE SF
View TDS and specifications

Mapeflex AC4
ification of
View TDS and specifications

Mapeflex Express 80/400
View TDS and specifications

Mapeflex MS 45
F
View TDS and specifications

Mapeflex MS Crystal
F
View TDS and specifications
All Sealants and AnchoringEvery Mapei product and the distributor page
Ultrabond MS Rapid in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultrabond MS Rapid you need, or describe the job and we will work it out with you.

