
Mapei PrimerNo. 02 / 24
Eco Prim PU 1K Turbo Technical Data Sheet (TDS)
Mapei primer.
Eco Prim PU 1K Turbo is the rapid grade of the Mapei one component polyurethane primer, a solvent free liquid that cures on the moisture in the screed and in the air, and its figures are its own and not the plain grade's. It sets to light foot traffic in 30 to 40 minutes and hardens in 2 hours, against 7 to 8 hours and 24 hours for Eco Prim PU 1K, and parquet may be bonded onto it from 2 hours and up to 24 hours after priming.
- Surface consolidation and dust repelling treatment on cementitious, anhydrite and heated screeds
- Waterproofing cementitious screeds too damp for parquet to be laid on them
- Priming before parquet is bonded with Mapei resin based reactive adhesives
- Priming OSB chipboard panels, slab paved surfaces, ceramic tiles and traces of old glue
- Anti dust treatment for cementitious and dry anhydrite screeds with a crumbly surface
- Consolidating partly detached elements when an existing parquet floor is refurbished
Build a list across products and send it once, or ask about Eco Prim PU 1K Turbo on WhatsApp now.
- Consumption
- 0.08 to 0.1 kg/m²
- Pack we stock
- 10 kg
- Colour
- brown
Mapei document 02914 · revision 9-2026
About Eco Prim PU 1K Turbo
It is used at 80 to 100 g per square metre per coat where the plain grade takes 200 to 400. It consolidates dusty cementitious and anhydrite screeds and waterproofs screeds carrying up to 6 per cent CM, or 92 per cent relative humidity in one coat and 98 per cent in two. EMICODE EC1 Plus, odourless and not flammable.
Documentation
Related documentation
Technical data sheet
Revision 9-2026 · 1.2 MB · PDF
Eco Prim PU 1K Turbo as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Revision 9-2026 · 0.2 MB · PDF
For the method statement and the site file.
DownloadSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 3.
As published in the data sheet
4.00 to 5.00kg
- As printed, per coat: 0.08 to 0.1 kg/m2
- 1 coat
- over 50 m2
Order 1 pack of 10 kg drum
Taken from the Eco Prim PU 1K Turbo data sheet: CONSUMPTION: 80-100 g/m2 per coat. As a vapour barrier up to a maximum of 450 g/m2. The sheet quotes grammes per square metre, so the rate is stored in kilogrammes as 0.08 to 0.1 to match the 10 kg drum. No site allowance is added unless you turn one on. The sheet prints one rate and one ceiling. The rate is 80 to 100 g/m2 per coat, and used as a vapour barrier the total must not pass 450 g/m2, which is between four and five coats at that rate. One coat is the sheet's own recommendation on a porous substrate, a second goes on when the first takes light foot traffic after about 30 minutes, at least two are required where the residual moisture is above 5 per cent, and a third is checked for after that and broadcast with Quartz 0.8.
Application
Where it is used.
- 01Surface consolidation and dust repelling treatment on cementitious, anhydrite and heated screeds
- 02Waterproofing cementitious screeds too damp for parquet to be laid on them
- 03Priming before parquet is bonded with Mapei resin based reactive adhesives
- 04Priming OSB chipboard panels, slab paved surfaces, ceramic tiles and traces of old glue
- 05Anti dust treatment for cementitious and dry anhydrite screeds with a crumbly surface
- 06Consolidating partly detached elements when an existing parquet floor is refurbished
Specification
Technical data.
- EMICODE EC1 Plus - very low emission
| Coverage | 80-100 g/m² per coat. As a vapour barrier up to a maximum of 450 g/m². |
|---|---|
| Pack size | 10 kg drums |
| Set to light foot traffic | 30-40 minutes |
| Colours | brown |
| Application temperature | from +5°C to +35°C |
| Consistency | liquid |
| Storage and shelf life | 12 months in its original, well sealed container under normal conditions, protected from frost |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.20 g/cm³ |
| Viscosity | 300 mPa.s Brookfield at +23°C (rotor 1 - 10 rpm) |
| Dry solids | 100 % |
| Maximum residual humidity | 6% CM (carbide hygrometer, UNI 10329), or 92% R.H. for 1 coat and 98% for 2 coats (in situ probe test, ASTM F2170 and BS 8203). On heated screeds, 3% CM or 50% R.H. |
| Loss of stickiness | after 30-40 minutes |
| Final hardening time | 2 hours |
| Waiting time between coats | min. 40 minutes, max. 2 hours |
| Waiting time before laying | minimum 2 hours, maximum 24 hours, laying directly with a reactive adhesive |
| Cleaning agent | Thinner PU or Cleaner L while fresh, Pulicol 2000 once set |
Typical values as Mapei prints them in the data sheet for Eco Prim PU 1K Turbo. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg drums. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
12 months in its original, well sealed container under normal conditions, protected from frost in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
Cleaning
Thinner PU or Cleaner L while fresh, Pulicol 2000 once set. Clean tools before the material hardens; once cured it comes off by mechanical means only.
For quantity surveyors
BOQ clause.
Supply and apply Eco Prim PU 1K Turbo, a primer manufactured by Mapei. Allow 0.08 to 0.1 kg/m2, as published by the manufacturer. Supplied in 10 kg drums. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Eco Prim PU 1K Turbo |
|---|---|
| Manufacturer | Mapei |
| Type | Primer |
| Consumption | 0.08 to 0.1 kg/m2 |
| Pack size | 10 kg drums |
| Set time | 30-40 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 80-100 g/m² per coat. As a vapour barrier up to a maximum of 450 g/m².
10 kg drums
You can download the official Eco Prim PU 1K Turbo technical data sheet as a PDF directly from this page, revision 9-2026, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Eco Prim PU 1K
View TDS and specifications

Eco Prim T Plus
LOW ODOUR ICON ISO 16000-28
View TDS and specifications

Nivorapid
CE EN 13813c40 F10 A2 S1
View TDS and specifications

Planex HR Maxi
EN 13813 CT-C30-F6-A1FL
View TDS and specifications

Planiprep 4 LVT
View TDS and specifications

Planiprep Fast Track
View TDS and specifications
All Self Leveling and MicrocementEvery Mapei product and the distributor page
Eco Prim PU 1K Turbo in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Eco Prim PU 1K Turbo you need, or describe the job and we will work it out with you.

