
Mapei Self LevellingNo. 07 / 24
Planiprep Fast Track Technical Data Sheet (TDS)
Mapei self levelling.
Programme pressure is what Planiprep Fast Track answers: an ultra rapid drying thixotropic skimming compound laid from a feather edge up to 3 mm, ready to take a floor covering in two hours rather than overnight. At that thinness it corrects surface texture and small deviations rather than level, and it always takes a covering on top.
- Repairing floors that must be ready for use quickly
- Levelling and skimming new and existing internal substrates
- Smoothing concrete slabs and cementitious screeds
- Skimming terrazzo, ceramic and natural stone
- Repairing steps, landings and the edges of pillars
- Preparation before resilient and textile coverings
Build a list across products and send it once, or ask about Planiprep Fast Track on WhatsApp now.
- Consumption
- 1 kg/m² per mm
- Pack we stock
- 4 kg
- Colour
- grey
Mapei document 04028
About Planiprep Fast Track
It is supplied as 4 kg sachets of grey fine powder mixed at 50 to 55 per cent water, about 2 to 2.2 litres per sachet, setting to light foot traffic in roughly an hour at 3 mm and using around 1.0 kg/m² per mm of thickness. Apply between +5°C and +30°C. For UAE retail and hotel refurbishment the sachet size earns its keep, because a gang can mix only what it will lay before set.
Documentation
Related documentation
Technical data sheet
2.2 MB · PDF
Planiprep Fast Track as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 10 mm.
As published in the data sheet
150kg
- 1 kg/m2 per mm
- 3 mm thick
- over 50 m2
Order 38 packs of 4 kg bag
Taken from the Planiprep Fast Track data sheet: CONSUMPTION: the consumption rate for Planiprep Fast Track is approximately 1.0 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. The sheet sets a maximum thickness of 1 cm and prints no minimum, so the 1 mm lower bound here is an input limit rather than a sheet figure.
Application
Where it is used.
- 01Repairing floors that must be ready for use quickly
- 02Levelling and skimming new and existing internal substrates
- 03Smoothing concrete slabs and cementitious screeds
- 04Skimming terrazzo, ceramic and natural stone
- 05Repairing steps, landings and the edges of pillars
- 06Preparation before resilient and textile coverings
Specification
Technical data.
- EN 13813
| Coverage | The consumption rate for Planiprep Fast Track is approximately 1.0 kg/m² per mm of thickness. |
|---|---|
| Pack size | 4 kg |
| Set to light foot traffic | approx. 1 hour (3 mm) |
| Colours | grey |
| Mixing ratio | (with water): 50-55% (2-2.2 l per sachet) |
| Application temperature | +5°C to +30°C |
| Consistency | fine powder |
| Storage and shelf life | Planiprep Fast Track remains stable for at least 12 months if stored in a dry place. If stored for longer periods, Planiprep Fast Track may take longer to set, though without altering its final characteristics. |
| Density | 650 kg/m³ |
| Dry solids | 100% |
| Ph | approx. 12 |
Typical values as Mapei prints them in the data sheet for Planiprep Fast Track. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
4 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
(with water): 50-55% (2-2.2 l per sachet). Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
Planiprep Fast Track remains stable for at least 12 months if stored in a dry place. If stored for longer periods, Planiprep Fast Track may take longer to set, though without altering its final characteristics. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Planiprep Fast Track, a self levelling manufactured by Mapei. Allow 1 kg/m2 per mm, as published by the manufacturer. Mix at (with water): 50-55% (2-2.2 l per sachet). Supplied in 4 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Planiprep Fast Track |
|---|---|
| Manufacturer | Mapei |
| Type | Self Levelling |
| Consumption | 1 kg/m2 per mm |
| Pack size | 4 kg |
| Mixing ratio | (with water): 50-55% (2-2.2 l per sachet) |
| Set time | approx. 1 hour (3 mm) |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: The consumption rate for Planiprep Fast Track is approximately 1.0 kg/m² per mm of thickness.
4 kg
You can download the official Planiprep Fast Track technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Eco Prim PU 1K
View TDS and specifications

Eco Prim PU 1K Turbo
View TDS and specifications

Eco Prim T Plus
LOW ODOUR ICON ISO 16000-28
View TDS and specifications

Nivorapid
CE EN 13813c40 F10 A2 S1
View TDS and specifications

Planex HR Maxi
EN 13813 CT-C30-F6-A1FL
View TDS and specifications

Planiprep 4 LVT
View TDS and specifications
All Self Leveling and MicrocementEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Mixing Applications
Mix at the stated water. Too much and the screed segregates, too little and it will not flow out.
View the range
Keiser
Grinders and Polishing
Taking the laitance off and vacuuming the slab down before anything is poured on it.
View the range
Hilti
PR 30-HVS Rotating Laser
Sets and checks the finished floor datum the screed is poured to.
View the range
Planiprep Fast Track in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planiprep Fast Track you need, or describe the job and we will work it out with you.