
Mapei Self LevellingNo. 06 / 24
Planiprep 4 LVT Technical Data Sheet (TDS)
Mapei self levelling.
Planiprep 4 LVT is a ready to use smoothing paste for one specific job: taking an existing ceramic or stone floor and making it flat enough for LVT. It fills the grout joints and levels from a feather edge upwards, so the tile pattern beneath does not telegraph through a thin vinyl plank, which is the usual complaint when LVT goes down over tile on tile.
- Smoothing existing internal ceramic and stone surfaces
- Filling the joints between tiles before LVT
- Preparation for loose lay LVT tiles and planks
- Preparation for LVT bonded with reactive adhesives
- Levelling wood, gypsum and fibre cement boards
Build a list across products and send it once, or ask about Planiprep 4 LVT on WhatsApp now.
- Consumption
- 0.08 to 0.1 kg/m²
- Pack we stock
- 10 kg
- Colour
- white
Mapei document 07701
About Planiprep 4 LVT
Being a levelling layer rather than a wearing surface, it always receives a covering. It comes as a white thick paste in 10 kg packs, needs no mixing with water, sets in about an hour and uses roughly 0.08 to 0.1 kg/m². Rated EC1 Plus for very low emissions and applied between +5°C and +35°C, which suits refurbishment inside occupied UAE buildings where a powder product would raise dust.
Documentation
Related documentation
Technical data sheet
1.2 MB · PDF
Planiprep 4 LVT as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
4.00 to 5.00kg
- Skim over tiled surfaces, filling the joints: 0.08 to 0.1 kg/m2
- over 50 m2
Order 1 pack of 10 kg drum
Taken from the Planiprep 4 LVT data sheet: CONSUMPTION: consumption of Planiprep 4LVT is approximately 0.08 to 0.1 kg/m2. No site allowance is added unless you turn one on. A ready to use grout smoother. The sheet quotes a rate per square metre and not a rate per millimetre, because the product fills joints rather than building a layer.
Application
Where it is used.
- 01Smoothing existing internal ceramic and stone surfaces
- 02Filling the joints between tiles before LVT
- 03Preparation for loose lay LVT tiles and planks
- 04Preparation for LVT bonded with reactive adhesives
- 05Levelling wood, gypsum and fibre cement boards
Specification
Technical data.
- EN 13813
- EMICODE EC1 Plus - very low emission
| Coverage | Consumption of Planiprep 4LVT is approximately 0.08-0.1 kg/m². |
|---|---|
| Pack size | 10 kg |
| Set to light foot traffic | approx. 1 hour |
| Colours | white |
| Application temperature | +5°C to +35°C |
| Consistency | thick paste |
| Storage and shelf life | Planiprep 4LVT remains stable for at least 12 months if stored in a dry place. |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.65 g/cm³ |
Typical values as Mapei prints them in the data sheet for Planiprep 4 LVT. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Planiprep 4LVT remains stable for at least 12 months if stored in a dry place. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Planiprep 4 LVT, a self levelling manufactured by Mapei. Allow 0.08 to 0.1 kg/m2, as published by the manufacturer. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Planiprep 4 LVT |
|---|---|
| Manufacturer | Mapei |
| Type | Self Levelling |
| Consumption | 0.08 to 0.1 kg/m2 |
| Pack size | 10 kg |
| Set time | approx. 1 hour |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Consumption of Planiprep 4LVT is approximately 0.08-0.1 kg/m².
10 kg
You can download the official Planiprep 4 LVT technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Eco Prim PU 1K
View TDS and specifications

Eco Prim PU 1K Turbo
View TDS and specifications

Eco Prim T Plus
LOW ODOUR ICON ISO 16000-28
View TDS and specifications

Nivorapid
CE EN 13813c40 F10 A2 S1
View TDS and specifications

Planex HR Maxi
EN 13813 CT-C30-F6-A1FL
View TDS and specifications

Planiprep Fast Track
View TDS and specifications
All Self Leveling and MicrocementEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Mixing Applications
Mix at the stated water. Too much and the screed segregates, too little and it will not flow out.
View the range
Keiser
Grinders and Polishing
Taking the laitance off and vacuuming the slab down before anything is poured on it.
View the range
Hilti
PR 30-HVS Rotating Laser
Sets and checks the finished floor datum the screed is poured to.
View the range
Planiprep 4 LVT in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planiprep 4 LVT you need, or describe the job and we will work it out with you.