Planex HR Maxi self levelling pack
Mapei's own picture. The pack we stock: 20 kg.

Mapei Self LevellingNo. 05 / 24

Planex HR Maxi Technical Data Sheet (TDS)

Self Levelling to EN 13813 CT-C30-F6-A1FL.

Planex HR Maxi is the moisture resistant member of the Mapei smoothing range, a rapid drying self levelling compound laid from 3 to 40 mm in one layer and classified CT-C30-F6-A1FL to EN 13813. Ultraplan Maxi covers the same 3 to 40 mm, but Mapei keeps that one indoors: Planex HR Maxi is the grade it allows externally, over substrates that are not completely dry or carry a high level of residual moisture, and over concrete with rising damp beneath a PVC isolating sheet.

  • Smoothing over concrete floors and cementitious screeds
  • Smoothing over heated floors
  • Smoothing over existing concrete, terrazzo, ceramic, natural stone and magnesite floors
  • External smoothing, and substrates with a high level of residual moisture
  • Smoothing over concrete with rising damp before PVC isolating sheets are laid
  • Levelling before resilient, textile and ceramic floor coverings
Data sheet1.2 MB

Build a list across products and send it once, or ask about Planex HR Maxi on WhatsApp now.

Class
EN 13813 CT-C30-F6-A1FL
Consumption
1.7 kg/m² per mm
Pack we stock
20 kg
Colour
grey

Mapei document 04050 · revision 07-2021

About Planex HR Maxi

That tolerance is what decides between the two. Mapei also recommends it where high resistance to static and dynamic loads is required. A 20 kg bag takes 3.8 to 4.0 litres of water, or 3.0 litres for a mix stiff enough to hold a fall. Consumption is 1.7 kg per square metre per millimetre, and ceramic can be bonded after 3 hours.

Documentation

Related documentation

  • Technical data sheet

    Revision 07-2021 · 1.2 MB · PDF

    Planex HR Maxi as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 3 to 40 mm.

As published in the data sheet

850kg

  • 1.7 kg/m2 per mm
  • 10 mm thick
  • over 50 m2

Order 43 packs of 20 kg bag

Send this quantity for a quote

Taken from the Planex HR Maxi data sheet: CONSUMPTION: the consumption rate of Planex HR Maxi is 1.7 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. Thickness per layer, from 3 to 40 mm, both bounds printed on the sheet. The 10 mm default is a realistic single pass inside that range and is the calculator's choice, not a Mapei recommendation. The figure is powder only: a 20 kg bag is mixed with 3.8 to 4.0 litres of water, or 3.0 litres where the mix has to hold a fall, and neither changes the quantity of powder. A second layer is applied as soon as the first sets to foot traffic, about 1 hour at +23 degrees, otherwise the first layer is primed again.

Application

Where it is used.

  1. 01Smoothing over concrete floors and cementitious screeds
  2. 02Smoothing over heated floors
  3. 03Smoothing over existing concrete, terrazzo, ceramic, natural stone and magnesite floors
  4. 04External smoothing, and substrates with a high level of residual moisture
  5. 05Smoothing over concrete with rising damp before PVC isolating sheets are laid
  6. 06Levelling before resilient, textile and ceramic floor coverings

Specification

Technical data.

  • EN 13813 CT-C30-F6-A1FL
  • EN 13813
  • EMICODE EC1 Plus - very low emission
Planex HR Maxi technical specifications from the manufacturer TDS
ClassificationEN 13813 CT-C30-F6-A1FL
Coverage1.7 kg/m² per mm of thickness.
Pack size20 kg
Pot lifeworkability time 20-30 mins.
Set to light foot traffic50-90 mins.
Coloursgrey
Mixing ratio19-20 parts of water per 100 parts by weight, which is 3.8 - 4.0 litres per 20 kg bag, or 3.0 litres for a stiffer mix to create a slope
Application temperaturefrom +5°C to +35°C
Consistencyfine powder
Storage and shelf lifeStable for 12 months if stored in a dry place. Longer storage may lengthen the setting time without affecting the final characteristics.
EMICODEEC1 Plus - very low emission
Thicknessper layer: from 3 to 40 mm
Set to foot traffic3-4 hours
Waiting time before bonding flooringceramic 3 hours, stone 24 hours, resilient and textile 24/72 hours, parquet 24/72 hours
Compressive strength30 N/mm² after 28 days
Flexural strength6.5 N/mm² after 28 days
Densitybulk density 1350 kg/m³, density of mix 2,100 kg/m³
Phapprox. 12
Dry solids100%

Typical values as Mapei prints them in the data sheet for Planex HR Maxi. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

20 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

19-20 parts of water per 100 parts by weight, which is 3.8 - 4.0 litres per 20 kg bag, or 3.0 litres for a stiffer mix to create a slope. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

workability time 20-30 mins.. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

Stable for 12 months if stored in a dry place. Longer storage may lengthen the setting time without affecting the final characteristics. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Planex HR Maxi, a self levelling manufactured by Mapei, classified EN 13813 CT-C30-F6-A1FL. Allow 1.7 kg/m2 per mm, as published by the manufacturer. Applied thickness per layer: from 3 to 40 mm. Mix at 19-20 parts of water per 100 parts by weight, which is 3.8 - 4.0 litres per 20 kg bag, or 3.0 litres for a stiffer mix to create a slope. Supplied in 20 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Planex HR Maxi
ProductPlanex HR Maxi
ManufacturerMapei
TypeSelf Levelling
ClassificationEN 13813 CT-C30-F6-A1FL
Consumption1.7 kg/m2 per mm
Thicknessper layer: from 3 to 40 mm
Pack size20 kg
Mixing ratio19-20 parts of water per 100 parts by weight, which is 3.8 - 4.0 litres per 20 kg bag, or 3.0 litres for a stiffer mix to create a slope
Set time50-90 mins.
Pot lifeworkability time 20-30 mins.
Unit of measurementm2

Frequently Asked Questions

Planex HR Maxi is classified EN 13813 CT-C30-F6-A1FL according to EN 13813, as stated in the manufacturer's technical data sheet.

As per the TDS: 1.7 kg/m² per mm of thickness.

20 kg

You can download the official Planex HR Maxi technical data sheet as a PDF directly from this page, revision 07-2021, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Planex HR Maxi in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planex HR Maxi you need, or describe the job and we will work it out with you.

Chat on WhatsApp