
Mapei Self LevellingNo. 04 / 24
Nivorapid Technical Data Sheet (TDS)
Self Levelling to CE EN 13813c40 F10 A2 S1.
Where a floor needs levelling but the material has to stay put rather than flow, Nivorapid is the answer: a thixotropic cementitious levelling compound for layers from 1 to 20 mm, usable on vertical surfaces as well as floors. That makes it a preparation and repair material rather than a finished surface, and it covers work no self levelling grade can do, including steps, landings, pillar arrises and holes in walls and ceilings.
- Levelling interior floors and walls
- Smoothing terrazzo, ceramic and natural stone
- Repairing steps, landings and pillar edges
- Filling depressions and holes in floors and walls
- Smoothing heated floors
- Preparation before ceramic, resilient and wooden coverings
Build a list across products and send it once, or ask about Nivorapid on WhatsApp now.
- Class
- CE EN 13813c40 F10 A2 S1
- Consumption
- 1.6 kg/m² per mm
- Pack we stock
- 25 kg
- Colour
- grey-brown
Mapei document 00502
About Nivorapid
It sets to light foot traffic in about two hours, mixes at 21 to 23 parts water per 100 parts powder, and gives 15 minutes of workability. Coverage is 1.6 kg/m² per mm of thickness from 25 kg bags, classified CT C40 F10 and rated EC1 R Plus. In UAE summer heat those 15 minutes shrink, so mix small batches and keep bags out of the sun.
Documentation
Related documentation
Technical data sheet
2.1 MB · PDF
Nivorapid as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 20 mm.
As published in the data sheet
240kg
- 1.6 kg/m2 per mm
- 3 mm thick
- over 50 m2
Order 10 packs of 25 kg bag
Taken from the Nivorapid data sheet: CONSUMPTION: 1.6 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. The sheet is headed for layers from 1 to 20 mm thick and sends thicknesses under 1 mm to Planipatch. Also supplied in 4 x 5 kg packs.
Application
Where it is used.
- 01Levelling interior floors and walls
- 02Smoothing terrazzo, ceramic and natural stone
- 03Repairing steps, landings and pillar edges
- 04Filling depressions and holes in floors and walls
- 05Smoothing heated floors
- 06Preparation before ceramic, resilient and wooden coverings
Specification
Technical data.
- CE EN 13813c40 F10 A2 S1
- EN 13813
- EMICODE EC1 R Plus - very low emission
| Classification | CE EN 13813c40 F10 A2 S1 |
|---|---|
| Coverage | 1.6 kg/m² per mm of thickness. |
| Pack size | 25 kg |
| Pot life | 15 minutes |
| Set to light foot traffic | approx. 2 hours |
| Colours | grey-brown |
| Mixing ratio | 21-23 parts water per 100 parts of Nivorapid |
| Application temperature | from +5°C to +30°C |
| Consistency | fine powder |
| Storage and shelf life | Stored in a dry place Nivorapid is stable for at least 12 months. A prolonged storage of Nivorapid could, over time, shorten setting time, without however altering its final characteristics. The product complies with the conditions of Annex XVII to Regulation (EC) N° 1907/2006 (REACH), item 47. |
| EMICODE | EC1 R Plus - very low emission |
| Ph | approx. 12 |
| Density | 1,400 kg/m³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Nivorapid. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
21-23 parts water per 100 parts of Nivorapid. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
15 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Stored in a dry place Nivorapid is stable for at least 12 months. A prolonged storage of Nivorapid could, over time, shorten setting time, without however altering its final characteristics. The product complies with the conditions of Annex XVII to Regulation (EC) N° 1907/2006 (REACH), item 47. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Nivorapid, a self levelling manufactured by Mapei, classified CE EN 13813c40 F10 A2 S1. Allow 1.6 kg/m2 per mm, as published by the manufacturer. Mix at 21-23 parts water per 100 parts of Nivorapid. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Nivorapid |
|---|---|
| Manufacturer | Mapei |
| Type | Self Levelling |
| Classification | CE EN 13813c40 F10 A2 S1 |
| Consumption | 1.6 kg/m2 per mm |
| Pack size | 25 kg |
| Mixing ratio | 21-23 parts water per 100 parts of Nivorapid |
| Set time | approx. 2 hours |
| Pot life | 15 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Nivorapid is classified CE EN 13813c40 F10 A2 S1 according to EN 13813, as stated in the manufacturer's technical data sheet.
As per the TDS: 1.6 kg/m² per mm of thickness.
25 kg
You can download the official Nivorapid technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Eco Prim PU 1K
View TDS and specifications

Eco Prim PU 1K Turbo
View TDS and specifications

Eco Prim T Plus
LOW ODOUR ICON ISO 16000-28
View TDS and specifications

Planex HR Maxi
EN 13813 CT-C30-F6-A1FL
View TDS and specifications

Planiprep 4 LVT
View TDS and specifications

Planiprep Fast Track
View TDS and specifications
All Self Leveling and MicrocementEvery Mapei product and the distributor page
On the van
Tools for this job.

Keiser
Mixing Applications
Mix at the stated water. Too much and the screed segregates, too little and it will not flow out.
View the range
Keiser
Grinders and Polishing
Taking the laitance off and vacuuming the slab down before anything is poured on it.
View the range
Hilti
PR 30-HVS Rotating Laser
Sets and checks the finished floor datum the screed is poured to.
View the range
Nivorapid in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Nivorapid you need, or describe the job and we will work it out with you.