
Mapei PrimerNo. 08 / 24
Primer G Technical Data Sheet (TDS)
Primer to LOW ODOUR ICON ISO 16000-28.
Primer G is a synthetic resin primer in water dispersion, and what it does explains why no levelling layer should be poured without one. It evens out the absorption of the substrate so the compound above does not lose its mixing water into the slab and cure weak and dusty, it binds residual dust, and on gypsum or anhydrite it forms a film that prevents the sulphate reaction with cement which otherwise separates the two layers.
- Treating gypsum surfaces before installing ceramic tiles
- Improving adhesion of smoothing compounds
- Providing uniform absorption on cementitious surfaces
- Priming anhydrite screeds before cement based products
- Priming between coats of smoothing compound
- Anchoring coat for gypsum based sprayable plasters
Build a list across products and send it once, or ask about Primer G on WhatsApp now.
- Class
- LOW ODOUR ICON ISO 16000-28
- Consumption
- 0.08 to 0.15 kg/m²
- Pack we stock
- 25 kg
- Colour
- light blue
Mapei document 00532
About Primer G
Use it before smoothing compounds on cementitious, anhydrite and gypsum surfaces, and between coats of smoothing compound once the first is dry. Supplied as a light blue liquid in 25 kg and 5 kg packs, consumption is 0.08 to 0.15 kg/m² depending on porosity, applied from +5°C to +35°C. Gypsum partitions are everywhere in UAE fit out work, so keep this primer on site.
Documentation
Related documentation
Technical data sheet
1.5 MB · PDF
Primer G as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
4.00 to 7.50kg
- As printed: 0.08 to 0.15 kg/m2
- 1 coat
- over 50 m2
Order 1 pack of 25 kg drum
Taken from the Primer G data sheet: CONSUMPTION: the consumption of Primer G depends on the porosity and absorption of the surface. Normal consumption is between 0.08 and 0.15 kg/m2. No site allowance is added unless you turn one on. The sheet gives a dilution for each use: neat on gypsum based substrates, 1:1 with water on cementitious substrates and between smoothing layers, 1:2 as an anchoring coat for gypsum plasters and 1:3 under wallpaper adhesives. It does not say which dilution the consumption range belongs to, so the figure is treated as product as supplied, which is the safe side for ordering. Also available in 10 kg and 5 kg drums and 1 kg bottles. The sheet prints a single range of 0.08 to 0.15 and no substrate table, so the calculator offers the range rather than splitting it into rows the manufacturer never published.
Application
Where it is used.
- 01Treating gypsum surfaces before installing ceramic tiles
- 02Improving adhesion of smoothing compounds
- 03Providing uniform absorption on cementitious surfaces
- 04Priming anhydrite screeds before cement based products
- 05Priming between coats of smoothing compound
- 06Anchoring coat for gypsum based sprayable plasters
Where it is not the right product
- On external walls, where a cementitious plaster is required
- In bathrooms, kitchens or any permanently wet area
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- LOW ODOUR ICON ISO 16000-28
| Classification | LOW ODOUR ICON ISO 16000-28 |
|---|---|
| Coverage | The consumption of Primer G depends on the porosity and absorption of the surface. Normal consumption is between 0.08 and 0.15 kg/m². |
| Pack size | 25 kg, 5 kg |
| Colours | light blue |
| Application temperature | from +5°C to +35°C |
| Consistency | liquid |
| Storage and shelf life | Primer G, in its original unopened packaging, can be stored for 12 months. Protect from frost. |
| Density | 1.01 g/cm³ |
| Dry solids | 18 % |
Typical values as Mapei prints them in the data sheet for Primer G. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg, 5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Primer G, in its original unopened packaging, can be stored for 12 months. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Primer G, a primer manufactured by Mapei, classified LOW ODOUR ICON ISO 16000-28. Allow 0.08 to 0.15 kg/m2, as published by the manufacturer. Supplied in 25 kg, 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Primer G |
|---|---|
| Manufacturer | Mapei |
| Type | Primer |
| Classification | LOW ODOUR ICON ISO 16000-28 |
| Consumption | 0.08 to 0.15 kg/m2 |
| Pack size | 25 kg, 5 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
Primer G is classified LOW ODOUR ICON ISO 16000-28 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: The consumption of Primer G depends on the porosity and absorption of the surface. Normal consumption is between 0.08 and 0.15 kg/m².
25 kg, 5 kg
You can download the official Primer G technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Eco Prim PU 1K
View TDS and specifications

Eco Prim PU 1K Turbo
View TDS and specifications

Eco Prim T Plus
LOW ODOUR ICON ISO 16000-28
View TDS and specifications

Nivorapid
CE EN 13813c40 F10 A2 S1
View TDS and specifications

Planex HR Maxi
EN 13813 CT-C30-F6-A1FL
View TDS and specifications

Planiprep 4 LVT
View TDS and specifications
All Self Leveling and MicrocementEvery Mapei product and the distributor page
Primer G in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Primer G you need, or describe the job and we will work it out with you.

