
Mapei PrimerNo. 09 / 24
Primer LT Technical Data Sheet (TDS)
Primer to GEV-EMICODE EC 1 Plus.
Primer LT is a light blue acrylic water based primer at 43% dry solids, written by Mapei for one family of jobs: priming absorbent indoor surfaces before Ultratop Loft and Mapei cementitious skimming mortars, and priming between the layers of Ultratop Loft itself. Against Primer G it is the narrower choice, internal surfaces only, ruled out on magnesium substrates and wherever capillary rising damp is present, and allowed on wood only where the boards are stable and will never meet water.
- Priming vertical absorbent surfaces before Ultratop Loft
- Priming between the layers of Ultratop Loft on floors and walls
- Preparing compact cementitious screeds and concrete floors before skimming
- Treating surfaces with traces of cementitious adhesive or an old, well bonded skim coat
- Treating gypsum, anhydrite, wood, marine plywood, chipboard and Terrazzo style tiles before skimming
- Priming absorbent substrates before cementitious adhesives indoors
Build a list across products and send it once, or ask about Primer LT on WhatsApp now.
- Class
- GEV-EMICODE EC 1 Plus
- Consumption
- 0.1 to 0.2 kg/m²
- Pack we stock
- 5 kg
- Colour
- light blue
Mapei document 06786 · revision 4-2025
About Primer LT
The substrate sets the dilution by weight: 1:1 between Ultratop Loft layers, 1:2 on cementitious or anhydrite, neat on wood. Consumption is about 0.1 kg/m2 between Loft layers and 0.1 to 0.2 kg/m2 on other substrates. It dries in 15 to 20 minutes and is overcoated at 2 to 3 hours, never later than 24.
Documentation
Related documentation
Technical data sheet
Revision 4-2025 · 0.9 MB · PDF
Primer LT as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
5.00 to 10.0kg
- On other substrates: 0.1 to 0.2 kg/m2
- over 50 m2
Order 1 to 2 packs of 5 kg can
Taken from the Primer LT data sheet: CONSUMPTION: when applied between the layers of Ultratop Loft the consumption is approximately 0.1 kg/m2. On other substrates, the consumption is from 0.1 to 0.2 kg/m2 depending on the absorbency and the method of application. Both printed rows are here, in printed order. No site allowance is added unless you turn one on. The other substrates row is the default because it is the row that covers priming a screed, concrete or gypsum before a skimming mortar, which is most of the work; the 0.1 kg/m2 row is the intermediate coat between two layers of Ultratop Loft and is the lighter case. The sheet sets the dilution by substrate, 1:1 between Ultratop Loft layers, 1:2 on cementitious or anhydrite and neat on wood, but does not say which dilution its consumption figures belong to, so the figure is treated as product as supplied, which is the safe side for ordering. One coat: the sheet publishes no second coat. Internal use only.
Application
Where it is used.
- 01Priming vertical absorbent surfaces before Ultratop Loft
- 02Priming between the layers of Ultratop Loft on floors and walls
- 03Preparing compact cementitious screeds and concrete floors before skimming
- 04Treating surfaces with traces of cementitious adhesive or an old, well bonded skim coat
- 05Treating gypsum, anhydrite, wood, marine plywood, chipboard and Terrazzo style tiles before skimming
- 06Priming absorbent substrates before cementitious adhesives indoors
Specification
Technical data.
- GEV-EMICODE EC 1 Plus
- EMICODE EC 1 Plus - very low emission
| Classification | GEV-EMICODE EC 1 Plus |
|---|---|
| Coverage | Approximately 0.1 kg/m² between the layers of Ultratop Loft. On other substrates 0.1 to 0.2 kg/m², depending on the absorbency and the method of application. |
| Pack size | 5 kg cans |
| Colours | light blue |
| Mixing ratio | 1:1 with water by weight between the layers of Ultratop Loft, 1:2 on cementitious or anhydrite substrates, neat on wood |
| Application temperature | +5°C to +35°C |
| Consistency | liquid |
| Storage and shelf life | 12 months in a dry area in its original sealed packaging at a temperature of +5°C to +30°C. Protect from frost. |
| EMICODE | EC 1 Plus - very low emission |
| Drying time | 15-20 mins. at +23°C and 50% R.H. |
| Overcoating waiting time | 2-3 hours, and not more than 24 hours |
| Density | 1.03 g/cm³ |
| Ph | 7.5 |
| Dry solids | 43% |
| Brookfield viscosity | 800 mPa·s (# 2 - 20 rpm) |
Typical values as Mapei prints them in the data sheet for Primer LT. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 kg cans. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
1:1 with water by weight between the layers of Ultratop Loft, 1:2 on cementitious or anhydrite substrates, neat on wood. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
12 months in a dry area in its original sealed packaging at a temperature of +5°C to +30°C. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Primer LT, a primer manufactured by Mapei, classified GEV-EMICODE EC 1 Plus. Allow 0.1 to 0.2 kg/m2, as published by the manufacturer. Mix at 1:1 with water by weight between the layers of Ultratop Loft, 1:2 on cementitious or anhydrite substrates, neat on wood. Supplied in 5 kg cans. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Primer LT |
|---|---|
| Manufacturer | Mapei |
| Type | Primer |
| Classification | GEV-EMICODE EC 1 Plus |
| Consumption | 0.1 to 0.2 kg/m2 |
| Pack size | 5 kg cans |
| Mixing ratio | 1:1 with water by weight between the layers of Ultratop Loft, 1:2 on cementitious or anhydrite substrates, neat on wood |
| Unit of measurement | m2 |
Frequently Asked Questions
Primer LT is classified GEV-EMICODE EC 1 Plus according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: Approximately 0.1 kg/m² between the layers of Ultratop Loft. On other substrates 0.1 to 0.2 kg/m², depending on the absorbency and the method of application.
5 kg cans
You can download the official Primer LT technical data sheet as a PDF directly from this page, revision 4-2025, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Eco Prim PU 1K
View TDS and specifications

Eco Prim PU 1K Turbo
View TDS and specifications

Eco Prim T Plus
LOW ODOUR ICON ISO 16000-28
View TDS and specifications

Nivorapid
CE EN 13813c40 F10 A2 S1
View TDS and specifications

Planex HR Maxi
EN 13813 CT-C30-F6-A1FL
View TDS and specifications

Planiprep 4 LVT
View TDS and specifications
All Self Leveling and MicrocementEvery Mapei product and the distributor page
Primer LT in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Primer LT you need, or describe the job and we will work it out with you.

