
Pidilite Puma Epoxy GroutNo. 01 / 12
Morcemcolor Epoxi Technical Data Sheet (TDS)
Epoxy Grout to R2T / RG.
An epoxy joint earns its price in four places, and the Morcemcolor Epoxi sheet names them: water submerged areas, surfaces holding aggressive chemicals, food, pharmaceutical and hygiene rooms, and floors under heavy traffic. Everywhere else a CG2 cement joint is the sensible purchase.
- Water submerged areas
- Food, pharmaceutical and hygiene areas
- Areas containing aggressive chemicals
- Heavy traffic and movement areas
- Glass mosaic and large format tiles
- Joints from 1 to 15 mm
Build a list across products and send it once, or ask about Morcemcolor Epoxi on WhatsApp now.
- Class
- R2T / RG
- Consumption
- 0.132 kg/m² on a 600x600x8 mm tile at a 3 mm joint
- Pack we stock
- 5 kg
- Colour
- Jet Black
About Morcemcolor Epoxi
The numbers behind the premium are compressive strength of at least 45 N/mm2, flexural of at least 30, abrasion under 250 mm3 and water absorption of 0.1 g or less at four hours, far tighter than the cementitious grades. It is two component, mixed 100 to 6.7, filling joints of 1 to 15 mm on ceramic, porcelain, vitrified tile, stone, glass mosaic and engineered stone. Two cautions matter in the UAE: pot life is 60 minutes at 25 degrees and shortens as temperature climbs, and an external substrate must be below 40 degrees before grouting starts. 5 kg packs.
Documentation
Related documentation
Technical data sheet
Revision 25_11 · 1.1 MB · PDF
Morcemcolor Epoxi as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The tile thickness is the depth of the joint, which is why a 20 mm slab takes twice the grout of a 10 mm tile at the same joint width.
As published in the data sheet
6.60kg
- 600 x 600 x 8 mm tile, 3 mm joint
- 0.132 kg/m2 by the sheet's own formula
- over 50 m2
Order 2 packs of 5 kg kit, 4.670 kg part A plus 330 g part B
Taken from the Morcemcolor Epoxi data sheet: FORMULA FOR THE COVERAGE CALCULATION: C = 1.65 x H x T x [(L + W) / (L x W)], with the thickness, both tile sides and the joint width in mm. The sheet also prints its mixed density as 1.65 g/cc. No site allowance is added unless you turn one on. The sheet disagrees with itself. The printed constant is 1.65 and that is the figure used here, but its own 187 cell consumption table reproduces exactly at 1.60, about 3 percent lower, so the table runs slightly below the formula and this calculator orders slightly more than the table would. The table prints no 600x600x10 row, so the default shown is its 600x600x8 row, which prints 0.13 kg/m2 at a 3 mm joint. Joint width range is 1 to 15 mm.
Application
Where it is used.
- 01Water submerged areas
- 02Food, pharmaceutical and hygiene areas
- 03Areas containing aggressive chemicals
- 04Heavy traffic and movement areas
- 05Glass mosaic and large format tiles
- 06Joints from 1 to 15 mm
Specification
Technical data.
- R2T / RG
- EN 13888 and ISO 13007
| Classification | R2T / RG |
|---|---|
| Joint width | 1 - 15 mm |
| Pack size | 5 kg |
| Pot life | 60 minutes |
| Set to light foot traffic | 24 hours at T @ 25°C |
| Colours | Jet Black |
| Mixing ratio | 100: 6.7 |
| Bond strength | ≥ 2 N/mm2 |
| Water resistance | ≤ 0.1 g |
| Application temperature | From +15°C to +35°C |
| Consistency | Smooth creamy paste |
| Storage and shelf life | 24 months in original packaging in dry place |
| Density | 1.65 ±0.05 |
| Service temperature | From +10°C to + 80 °C |
| Compressive strength | ≥ 45 N/ mm2 |
| Flexural strength | ≥ 30 N/ mm2 |
Typical values as Pidilite Puma prints them in the data sheet for Morcemcolor Epoxi. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
100: 6.7. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
60 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
24 months in original packaging in dry place in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Morcemcolor Epoxi, a epoxy grout manufactured by Pidilite Puma, classified R2T / RG. Allow 0.132 kg/m2 on a 600x600x8 mm tile at a 3 mm joint, as published by the manufacturer. Mix at 100: 6.7. Supplied in 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Morcemcolor Epoxi |
|---|---|
| Manufacturer | Pidilite Puma |
| Type | Epoxy Grout |
| Classification | R2T / RG |
| Consumption | 0.132 kg/m2 on a 600x600x8 mm tile at a 3 mm joint |
| Pack size | 5 kg |
| Mixing ratio | 100: 6.7 |
| Set time | 24 hours at T @ 25°C |
| Pot life | 60 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Morcemcolor Epoxi is classified R2T / RG according to EN 13888 and ISO 13007, as stated in the manufacturer's technical data sheet.
As per the TDS: 1 - 15 mm
5 kg
You can download the official Morcemcolor Epoxi technical data sheet as a PDF directly from this page, revision 25_11, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Morcemcolor Plus Flexible
CG2 A W
View TDS and specifications

Morcemcolor Universal Grout
CG2 A W
View TDS and specifications

Pegoland Classic
C1
View TDS and specifications

Pegoland Dos
C2 T
View TDS and specifications

Pegoland Dos Plus
C2 TE
View TDS and specifications

Pegoland Elastic
R2 T
View TDS and specifications
All Tile Adhesives and GroutsEvery Pidilite Puma product and the distributor page
Morcemcolor Epoxi in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Morcemcolor Epoxi you need, or describe the job and we will work it out with you.

