Pegoland Dos Plus tile adhesive pack
Pidilite Puma's own picture. The pack we stock: 25 kg.

Pidilite Puma Tile AdhesiveNo. 06 / 12

Pegoland Dos Plus Technical Data Sheet (TDS)

Tile Adhesive to C2 TE.

Anyone weighing Pegoland Dos Plus against Pegoland Flex is really asking whether deformability is needed, because C2 strength and extended open time are common to both. Dos Plus is C2 TE and nothing more: polymer fortified, reduced slip, open time adhesion of 1.2 to 1.5 N/mm2 measured at 30 minutes, cleared for interior and exterior floors, interior walls, exterior baseboards, underfloor heating, pools and wet areas, heavy traffic pavements and internal tile over tile.

  • Interior and exterior floor coverings
  • Interior wall coverings and exterior baseboards
  • Glass mosaic, marble and granite
  • Floors with underfloor heating
  • Swimming pools and other wet areas
  • Tile over tile on internal floors
Data sheet2.6 MB

Build a list across products and send it once, or ask about Pegoland Dos Plus on WhatsApp now.

Class
C2 TE
Consumption
4 to 6 kg/m²
Pack we stock
25 kg
Colour
Grey, White

About Pegoland Dos Plus

Its sheet stops short of facades, slate and thin porcelain slabs, which is where the S classes begin. For porcelain and stone on sound screeds in a villa or a mall, the S1 grade adds cost without adding capability. The figures to plan a UAE programme around are that 30 minute window and the 40 kg per square metre wall limit. Grey, white and extrawhite, 25 kg bags.

Documentation

Related documentation

  • Technical data sheet

    Revision 2026-05 · 2.6 MB · PDF

    Pegoland Dos Plus as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

How it is being applied

As published in the data sheet

300kg

  • Double gluing: 6 kg/m2
  • over 50 m2

Order 12 packs of 25 kg bag

Send this quantity for a quote

Taken from the Pegoland Dos Plus data sheet: Approximate yield: single gluing 4 Kg/m2, double gluing 6 Kg/m2. No site allowance is added unless you turn one on. The sheet chooses the trowel by the area of the tile, not the length of its side: up to 100 cm2 a U4, up to 450 cm2 a U6, up to 900 cm2 double or single gluing, and over 900 cm2 double gluing. A 600 by 600 tile is 3600 cm2, so the calculator starts on double gluing.

Application

Where it is used.

  1. 01Interior and exterior floor coverings
  2. 02Interior wall coverings and exterior baseboards
  3. 03Glass mosaic, marble and granite
  4. 04Floors with underfloor heating
  5. 05Swimming pools and other wet areas
  6. 06Tile over tile on internal floors

Where it is not the right product

  • On heated screeds or substrates that move, where an S1 or S2 deformable grade is required

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • C2 TE
  • EN 12004 and ISO 13007
Pegoland Dos Plus technical specifications from the manufacturer TDS
ClassificationC2 TE
CoverageSingle gluing: 4 Kg/m2
Pack size25 kg
Pot lifeApprox. 2 hours (depending on weather conditions)
Adjustment timeApprox. 30 min. (depending on weather conditions)
ColoursGrey, White
Mixing ratioPegoland DOS PLUS Extrawhite: 24±1%
Application temperaturefrom 5ºC to 40ºC
Storage and shelf life1 year in sealed original packaging, sheltered from weather conditions and humidity
Service temperature-30ºC a 90ºC

Typical values as Pidilite Puma prints them in the data sheet for Pegoland Dos Plus. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

Pegoland DOS PLUS Extrawhite: 24±1%. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

Approx. 2 hours (depending on weather conditions). Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

1 year in sealed original packaging, sheltered from weather conditions and humidity in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Pegoland Dos Plus, a tile adhesive manufactured by Pidilite Puma, classified C2 TE. Allow 4 to 6 kg/m2, as published by the manufacturer. Mix at Pegoland DOS PLUS Extrawhite: 24±1%. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Pegoland Dos Plus
ProductPegoland Dos Plus
ManufacturerPidilite Puma
TypeTile Adhesive
ClassificationC2 TE
Consumption4 to 6 kg/m2
Pack size25 kg
Mixing ratioPegoland DOS PLUS Extrawhite: 24±1%
Pot lifeApprox. 2 hours (depending on weather conditions)
Unit of measurementm2

Frequently Asked Questions

Pegoland Dos Plus is classified C2 TE according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: Single gluing: 4 Kg/m2

25 kg

You can download the official Pegoland Dos Plus technical data sheet as a PDF directly from this page, revision 2026-05, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Pegoland Dos Plus in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Pegoland Dos Plus you need, or describe the job and we will work it out with you.

Chat on WhatsApp