Pegoland Dos tile adhesive pack
Pidilite Puma's own picture. The pack we stock: 25 kg.

Pidilite Puma Tile AdhesiveNo. 05 / 12

Pegoland Dos Technical Data Sheet (TDS)

Tile Adhesive to C2 T.

Moving from C1 to C2 doubles the adhesion requirement from 0.5 to 1 N/mm2, and Pegoland Dos is the first rung of this range to meet it, recording 1.5 to 2.1 N/mm2 at 28 days. That buys porcelain, natural stone, granite and marble on interior and exterior pavements, interior claddings and baseboards, swimming pools, pavements under heavy traffic and tile over tile on internal floors.

  • Porcelain, natural stone, granite and marble
  • Interior and exterior pavements
  • Interior claddings and baseboards
  • Swimming pool tiling
  • Pavements with heavy traffic
  • Tile over tile on internal floors
Data sheet0.8 MB

Build a list across products and send it once, or ask about Pegoland Dos on WhatsApp now.

Class
C2 T
Consumption
4 to 6 kg/m²
Pack we stock
25 kg
Colour
Grey, White

About Pegoland Dos

What it does not buy is extended open time. Classified C2 T, its open time adhesion is quoted at 20 minutes, so in UAE heat the mortar should be spread two square metres at a time and tiled into at once; where the programme cannot work that way, Dos Plus is the honest answer. Service temperature spans -30 to 90 degrees. Grey and white, 25 kg bags, 40 kg per square metre on vertical surfaces.

Documentation

Related documentation

  • Technical data sheet

    Revision 2025_10 · 0.8 MB · PDF

    Pegoland Dos as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

How it is being applied

As published in the data sheet

300kg

  • Double gluing: 6 kg/m2
  • over 50 m2

Order 12 packs of 25 kg bag

Send this quantity for a quote

Taken from the Pegoland Dos data sheet: Approx. yield simple gluing 4 Kg/m2, approx. yield double gluing 6 Kg/m2. No site allowance is added unless you turn one on. The sheet chooses the trowel by the area of the tile, not the length of its side: up to 100 cm2 a U4, up to 450 cm2 a U6, up to 900 cm2 double or single gluing, and over 900 cm2 double gluing. A 600 by 600 tile is 3600 cm2, so the calculator starts on double gluing.

Application

Where it is used.

  1. 01Porcelain, natural stone, granite and marble
  2. 02Interior and exterior pavements
  3. 03Interior claddings and baseboards
  4. 04Swimming pool tiling
  5. 05Pavements with heavy traffic
  6. 06Tile over tile on internal floors

Where it is not the right product

  • On heated screeds or substrates that move, where an S1 or S2 deformable grade is required

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • C2 T
  • EN 12004 and ISO 13007
Pegoland Dos technical specifications from the manufacturer TDS
ClassificationC2 T
Coverage4 Kg/m2
Pack size25 kg
Pot lifeApprox. 2 hours (depending on weather conditions)
Adjustment timeApprox. 30 min. (depending on weather conditions)
ColoursGrey, White
Mixing ratioPegoland DOS White: 23±1%
Bond strength≥ 1 N/mm2 1,5 - 2,1
Application temperaturefrom 5ºC to 40ºC
Storage and shelf life1 year in sealed original packaging, sheltered from weather conditions and humidity
Service temperaturefrom -30ºC to 90ºC

Typical values as Pidilite Puma prints them in the data sheet for Pegoland Dos. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

Pegoland DOS White: 23±1%. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

Approx. 2 hours (depending on weather conditions). Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

1 year in sealed original packaging, sheltered from weather conditions and humidity in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Pegoland Dos, a tile adhesive manufactured by Pidilite Puma, classified C2 T. Allow 4 to 6 kg/m2, as published by the manufacturer. Mix at Pegoland DOS White: 23±1%. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Pegoland Dos
ProductPegoland Dos
ManufacturerPidilite Puma
TypeTile Adhesive
ClassificationC2 T
Consumption4 to 6 kg/m2
Pack size25 kg
Mixing ratioPegoland DOS White: 23±1%
Pot lifeApprox. 2 hours (depending on weather conditions)
Unit of measurementm2

Frequently Asked Questions

Pegoland Dos is classified C2 T according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: 4 Kg/m2

25 kg

You can download the official Pegoland Dos technical data sheet as a PDF directly from this page, revision 2025_10, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Pegoland Dos in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Pegoland Dos you need, or describe the job and we will work it out with you.

Chat on WhatsApp