Morcemcolor Universal Grout grout pack
Pidilite Puma's own picture. The pack we stock: 5 kg.

Pidilite Puma GroutNo. 03 / 12

Morcemcolor Universal Grout Technical Data Sheet (TDS)

Grout to CG2 A W.

Joint widths of 2 to 15 mm are the working range of Morcemcolor Universal Grout, and inside that it is the default cement joint for ceramic and porcelain, interior or exterior, radiant heated floors included. Classified CG2 A W to EN 13888, it records compressive strength above 15 N/mm2, flexural above 2.5, abrasion under 1000 mm3 and water absorption under 2 g at 30 minutes and under 5 g at four hours.

  • Joints from 2 to 15 mm
  • Low porosity porcelain tiling
  • Interior and exterior cladding
  • Floors with radiant heating
  • Ceramic wall and floor joints
Data sheet0.8 MB

Build a list across products and send it once, or ask about Morcemcolor Universal Grout on WhatsApp now.

Class
CG2 A W
Consumption
0.212 kg/m² on a 600x400x6 mm tile at a 5 mm joint
Pack we stock
5 kg
Colour
White and range of colours

About Morcemcolor Universal Grout

Absorption is the figure that decides most jobs, because a joint this tight does not need an epoxy to survive a bathroom or a mall concourse. It is not for expansion joints or anything carrying structural movement. In UAE heat the sheet asks for absorbent tiles and joints to be damped with clean water before filling, then cleaned off after 20 to 30 minutes. 5 kg bags, two year shelf life.

Documentation

Related documentation

  • Technical data sheet

    Revision 2025_07 · 0.8 MB · PDF

    Morcemcolor Universal Grout as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm
mm
mm
mm

The tile thickness is the depth of the joint, which is why a 20 mm slab takes twice the grout of a 10 mm tile at the same joint width.

As published in the data sheet

10.6kg

  • 600 x 400 x 6 mm tile, 5 mm joint
  • 0.2125 kg/m2 by the sheet's own formula
  • over 50 m2

Order 3 packs of 5 kg polyethylene bag

Send this quantity for a quote

Taken from the Morcemcolor Universal Grout data sheet: CONSUMPTION ACCORDING TO DIMENSIONS (KG/M2), yield in kg/m2, data valid for 6 mm thick tiles: 40x60 cm at a 5 mm joint prints 0.21 kg/m2. The sheet prints the formula in full: ((A+B)/AxB) x C x D x 0,17 = Kg/m2 with A and B the tile sides in cm and C and D in mm, which is 1.70 with all four dimensions in mm. It reproduces 34 of the 35 printed cells exactly. No site allowance is added unless you turn one on. The printed table is for 6 mm thick tiles only and prints no 600x600x10 row, so the default shown is the sheet's 40x60 cm row at a 5 mm joint, which prints 0.21 kg/m2. The one cell that does not reproduce is 20x20 cm at a 15 mm joint, printed 1.63 where the formula gives 1.53, which looks like a misprint rather than a different model.

Application

Where it is used.

  1. 01Joints from 2 to 15 mm
  2. 02Low porosity porcelain tiling
  3. 03Interior and exterior cladding
  4. 04Floors with radiant heating
  5. 05Ceramic wall and floor joints

Where it is not the right product

  • Where the joint meets chemicals or constant water, which calls for an epoxy grout

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • CG2 A W
  • EN 13888 and ISO 13007
Morcemcolor Universal Grout technical specifications from the manufacturer TDS
ClassificationCG2
Pack size5 kg
ColoursWhite and range of colours
Water resistance< 2 g (EN 12808-5)
Storage and shelf life2 years (5 Kg polyethylene bags)
Compressive strength> 15 N/mm² (EN 12808-3)
Flexural strength> 2,5 N/mm² (EN 12808-3)

Typical values as Pidilite Puma prints them in the data sheet for Morcemcolor Universal Grout. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

2 years (5 Kg polyethylene bags) in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Morcemcolor Universal Grout, a grout manufactured by Pidilite Puma, classified CG2 A W. Allow 0.212 kg/m2 on a 600x400x6 mm tile at a 5 mm joint, as published by the manufacturer. Supplied in 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Morcemcolor Universal Grout
ProductMorcemcolor Universal Grout
ManufacturerPidilite Puma
TypeGrout
ClassificationCG2 A W
Consumption0.212 kg/m2 on a 600x400x6 mm tile at a 5 mm joint
Pack size5 kg
Unit of measurementm2

Frequently Asked Questions

Morcemcolor Universal Grout is classified CG2 A W according to EN 13888 and ISO 13007, as stated in the manufacturer's technical data sheet.

5 kg

You can download the official Morcemcolor Universal Grout technical data sheet as a PDF directly from this page, revision 2025_07, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Morcemcolor Universal Grout in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Morcemcolor Universal Grout you need, or describe the job and we will work it out with you.

Chat on WhatsApp