Morcemcolor Plus Flexible grout pack
Pidilite Puma's own picture. The pack we stock: 5 kg.

Pidilite Puma GroutNo. 02 / 12

Morcemcolor Plus Flexible Technical Data Sheet (TDS)

Grout to CG2 A W.

Two grouts in this range share the CG2 A W classification, so the case for Morcemcolor Plus Flexible rests entirely on what has been added to it. Water repellency gives the joint a pearl effect against standing water, a bioactive package resists fungus and algae, and the mortar is flexible and tested after freeze thaw cycling with shrinkage held under 3 mm per metre.

  • Swimming pool joints
  • Wet areas prone to microorganisms
  • Low porosity porcelain joints
  • Joints from 2 to 15 mm
  • Floors with underfloor heating
  • Interior and exterior tiling
Data sheet0.4 MB

Build a list across products and send it once, or ask about Morcemcolor Plus Flexible on WhatsApp now.

Class
CG2 A W
Consumption
0.212 kg/m² on a 600x400x6 mm tile at a 5 mm joint
Pack we stock
5 kg
Colour
Range of colours

About Morcemcolor Plus Flexible

That points it at swimming pools, showers, kitchens and anywhere microorganisms take hold in a humid coastal UAE building, over underfloor heating as well. Strength matches the universal grade above 15 N/mm2 in compression and above 2.5 in flexure, in the same 2 to 15 mm joints. The limits are stated plainly: not for permanent immersion in sea water, thermal water or saline treated pools, where the sheet sends you to the epoxy, and never cleaned with acid. 5 kg bags.

Documentation

Related documentation

  • Technical data sheet

    Revision 2025_07 · 0.4 MB · PDF

    Morcemcolor Plus Flexible as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm
mm
mm
mm

The tile thickness is the depth of the joint, which is why a 20 mm slab takes twice the grout of a 10 mm tile at the same joint width.

As published in the data sheet

10.6kg

  • 600 x 400 x 6 mm tile, 5 mm joint
  • 0.2125 kg/m2 by the sheet's own formula
  • over 50 m2

Order 3 packs of 5 kg polyethylene bag

Send this quantity for a quote

Taken from the Morcemcolor Plus Flexible data sheet: CONSUMPTION ACCORDING TO DIMENSIONS (KG/M2), yield in kg/m2, data valid for 6 mm thick tiles: 40x60 cm at a 5 mm joint prints 0.21 kg/m2. The sheet prints the formula in full: ((A+B)/AxB) x C x D x 0,17 = Kg/m2 with A and B the tile sides in cm and C and D in mm, which is 1.70 with all four dimensions in mm. It reproduces 34 of the 35 printed cells exactly. No site allowance is added unless you turn one on. The printed table is for 6 mm thick tiles only and prints no 600x600x10 row, so the default shown is the sheet's 40x60 cm row at a 5 mm joint, which prints 0.21 kg/m2. The one cell that does not reproduce is 20x20 cm at a 15 mm joint, printed 1.63 where the formula gives 1.53, which looks like a misprint rather than a different model.

Application

Where it is used.

  1. 01Swimming pool joints
  2. 02Wet areas prone to microorganisms
  3. 03Low porosity porcelain joints
  4. 04Joints from 2 to 15 mm
  5. 05Floors with underfloor heating
  6. 06Interior and exterior tiling

Where it is not the right product

  • Where the joint meets chemicals or constant water, which calls for an epoxy grout

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • CG2 A W
  • EN 13888 and ISO 13007
Morcemcolor Plus Flexible technical specifications from the manufacturer TDS
ClassificationCG2
Pack size5 kg
ColoursRange of colours
Water resistance< 2 g (EN 12808-5)
Storage and shelf life2 years (5 Kg polyethylene bags)
Compressive strength> 15 N/mm² (EN 12808-3)
Flexural strength> 2,5 N/mm² (EN 12808-3)

Typical values as Pidilite Puma prints them in the data sheet for Morcemcolor Plus Flexible. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

2 years (5 Kg polyethylene bags) in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Morcemcolor Plus Flexible, a grout manufactured by Pidilite Puma, classified CG2 A W. Allow 0.212 kg/m2 on a 600x400x6 mm tile at a 5 mm joint, as published by the manufacturer. Supplied in 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Morcemcolor Plus Flexible
ProductMorcemcolor Plus Flexible
ManufacturerPidilite Puma
TypeGrout
ClassificationCG2 A W
Consumption0.212 kg/m2 on a 600x400x6 mm tile at a 5 mm joint
Pack size5 kg
Unit of measurementm2

Frequently Asked Questions

Morcemcolor Plus Flexible is classified CG2 A W according to EN 13888 and ISO 13007, as stated in the manufacturer's technical data sheet.

5 kg

You can download the official Morcemcolor Plus Flexible technical data sheet as a PDF directly from this page, revision 2025_07, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Morcemcolor Plus Flexible in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Morcemcolor Plus Flexible you need, or describe the job and we will work it out with you.

Chat on WhatsApp