
Pidilite Puma Tile AdhesiveNo. 07 / 12
Pegoland Elastic Technical Data Sheet (TDS)
Tile Adhesive to R2 T.
Metal, plywood, PVC, rubber and glass defeat a cementitious adhesive outright, and that gap is what Pegoland Elastic fills. A two component polyurethane epoxy hybrid classified R2 T, it is a reaction resin rather than a mortar, bonding tiles, stone, composites, engineered stone, metal and glass pieces to cement screeds, steel, aluminium, drywall, plywood, MDF, epoxy coatings and existing tiles, on interior and exterior floors and walls.
- Metal, plywood and drywall substrates
- Glass and metal tiles
- Composite and engineered stone
- Interior and exterior floors and walls
- Surfaces subject to heavy vibration
- Areas exposed to solvents, alkalis and oils
Build a list across products and send it once, or ask about Pegoland Elastic on WhatsApp now.
- Class
- R2 T
- Consumption
- 2.11 to 5.41 kg/m²
- Pack we stock
- 8 kg
About Pegoland Elastic
Shear adhesion is recorded at 5 N/mm2 or more against a 2 N/mm2 requirement, it tolerates -40 to 100 degrees and takes heavy vibration, solvents, alkalis and oils. Open time, pot life and adjustability are each a minimum of 60 minutes, the practical argument for it on a large format external job in UAE heat. Mixed 100 to 10 by weight from an 8 kg pail, grouted at 24 hours, applied from 10 to 40 degrees.
Documentation
Related documentation
Technical data sheet
Revision 2025_11 · 0.3 MB · PDF
Pegoland Elastic as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
215 to 271kg
- 3 mm bed, 6 x 6 mm notch: 4.3 to 5.41 kg/m2
- over 50 m2
Order 27 to 34 packs of 8 kg two component pail, A plus B
Taken from the Pegoland Elastic data sheet: Coverage: 1.5 - 1.9 m2 per 4 kg pack at 1.5 mm bed thickness (using 3 mm x 3 mm notch), 0.74 - 0.93 m2 per 4 kg pack at 3 mm bed thickness (using 6 mm x 6 mm notch). Shown as kg per m2 by dividing 4 kg by the printed area. Rate is for the mixed A plus B product. No site allowance is added unless you turn one on. Two component reaction resin adhesive, class R2T. The figures are for the mixed product. Note the sheet's own inconsistency: the coverage rows are quoted against a 4 kg pack while PACKAGING AND STORAGE gives an 8 Kg two component pail, so one pail is two of the printed units. The sheet also says coverage will vary depending on trowel notch size and type, tile size and how smooth and even the substrate is.
Application
Where it is used.
- 01Metal, plywood and drywall substrates
- 02Glass and metal tiles
- 03Composite and engineered stone
- 04Interior and exterior floors and walls
- 05Surfaces subject to heavy vibration
- 06Areas exposed to solvents, alkalis and oils
Specification
Technical data.
- R2 T
- EN 12004 and ISO 13007
| Classification | R2 T |
|---|---|
| Coverage | 1.5 - 1.9 m²/ 4 kg pack - 1.5 mm bed thickness (using 3 mm x 3 mm notch).; 0.74 - 0.93 m²/ 4 kg pack - 3 mm bed thickness (using 6 mm x 6 |
| Pack size | 8 kg |
| Pot life | Min. 60 minutes |
| Open time | Min. 60 minutes |
| Adjustment time | Min. 60 minutes |
| Waiting time before grouting | 24 hours |
| Mixing ratio | Part A - 7.3 kg & Part B - 0.7 kg (Part A : Part B - 100 : 10 by weight) |
| Application temperature | 10°C to 40°C |
| Storage and shelf life | 24 months in its original closed packaging and in the right position; keep it indoors and away from humidity |
| Density | 1.65 ± 0.1 kg/ litre |
| Service temperature | -40°C to +100°C |
Typical values as Pidilite Puma prints them in the data sheet for Pegoland Elastic. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
8 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
Part A - 7.3 kg & Part B - 0.7 kg (Part A : Part B - 100 : 10 by weight). Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
Min. 60 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
24 months in its original closed packaging and in the right position; keep it indoors and away from humidity in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Pegoland Elastic, a tile adhesive manufactured by Pidilite Puma, classified R2 T. Allow 2.11 to 5.41 kg/m2, as published by the manufacturer. Mix at Part A - 7.3 kg & Part B - 0.7 kg (Part A : Part B - 100 : 10 by weight). Supplied in 8 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Pegoland Elastic |
|---|---|
| Manufacturer | Pidilite Puma |
| Type | Tile Adhesive |
| Classification | R2 T |
| Consumption | 2.11 to 5.41 kg/m2 |
| Pack size | 8 kg |
| Mixing ratio | Part A - 7.3 kg & Part B - 0.7 kg (Part A : Part B - 100 : 10 by weight) |
| Pot life | Min. 60 minutes |
| Open time | Min. 60 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Pegoland Elastic is classified R2 T according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.
As per the TDS: 1.5 - 1.9 m²/ 4 kg pack - 1.5 mm bed thickness (using 3 mm x 3 mm notch).; 0.74 - 0.93 m²/ 4 kg pack - 3 mm bed thickness (using 6 mm x 6
8 kg
You can download the official Pegoland Elastic technical data sheet as a PDF directly from this page, revision 2025_11, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Morcemcolor Epoxi
R2T / RG
View TDS and specifications

Morcemcolor Plus Flexible
CG2 A W
View TDS and specifications

Morcemcolor Universal Grout
CG2 A W
View TDS and specifications

Pegoland Classic
C1
View TDS and specifications

Pegoland Dos
C2 T
View TDS and specifications

Pegoland Dos Plus
C2 TE
View TDS and specifications
All Tile Adhesives and GroutsEvery Pidilite Puma product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
Notched trowels comb the bed to an even depth, so the coverage under the tile is the coverage on the sheet.
View the range
Keiser
Mixing Applications
A paddle mix at the water ratio the sheet states is where the open time and the grab come from.
View the range
Peygran
Levelling
Levelling clips and wedges hold two tiles flush to each other while the adhesive sets.
View the range
Montolit
Masterpiuma P5
Cuts large format porcelain to the setting out line before the bed goes down.
View the range
Pegoland Elastic in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Pegoland Elastic you need, or describe the job and we will work it out with you.