Pegoland Fastflex tile adhesive pack
Pidilite Puma's own picture. The pack we stock: 25 kg.

Pidilite Puma Tile AdhesiveNo. 08 / 12

Pegoland Fastflex Technical Data Sheet (TDS)

Tile Adhesive to C2FTE S1.

Pegoland Fast Flex is bought for the calendar rather than the tile. Pedestrian traffic is allowed at 6 hours, industrial use at 24 and tanks and pools at 3 days, which is why the sheet names shopping centres, airports and hospitals as its natural refurbishment work.

  • Fast turnaround refurbishment work
  • Exterior marble, granite and natural stone
  • Floors with underfloor heating systems
  • Swimming pool coverings and immersion
  • Cooling chambers and overlays
  • Insulating boards and aerated concrete blocks
Data sheet1.7 MB

Build a list across products and send it once, or ask about Pegoland Fastflex on WhatsApp now.

Class
C2FTE S1
Consumption
4 to 6 kg/m²
Pack we stock
25 kg
Colour
Grey

About Pegoland Fastflex

Classified C2FTE with S1 deformability, the fast set costs nothing in class, and once hard it carries no soluble salts to stain stone or bloom as efflorescence on an exterior face, so it is the grade for marble and granite outdoors and the one other Pegoland sheets name for water sensitive tiles that might mark. Two UAE cautions sit in the text: pot life is only about 45 minutes, and application is capped at 30 degrees rather than the 40 allowed elsewhere in the range, so plan it for the early shift. Grey, 25 kg bags.

Documentation

Related documentation

  • Technical data sheet

    Revision 2026_6 · 1.7 MB · PDF

    Pegoland Fastflex as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

How it is being applied

As published in the data sheet

300kg

  • Double gluing: 6 kg/m2
  • over 50 m2

Order 12 packs of 25 kg bag

Send this quantity for a quote

Taken from the Pegoland Fastflex data sheet: Approximate performance: simple gluing 4 kg/m2, double gluing 6 kg/m2. No site allowance is added unless you turn one on. The sheet chooses the trowel by the area of the tile, not the length of its side: up to 100 cm2 a U4, up to 450 cm2 a U6, up to 900 cm2 double or single gluing, and over 900 cm2 double gluing. A 600 by 600 tile is 3600 cm2, so the calculator starts on double gluing.

Application

Where it is used.

  1. 01Fast turnaround refurbishment work
  2. 02Exterior marble, granite and natural stone
  3. 03Floors with underfloor heating systems
  4. 04Swimming pool coverings and immersion
  5. 05Cooling chambers and overlays
  6. 06Insulating boards and aerated concrete blocks

Specification

Technical data.

  • C2FTE S1
  • EN 12004 and ISO 13007
Pegoland Fastflex technical specifications from the manufacturer TDS
ClassificationC2FTE
Coveragesimple gluing: 4 kg/m2
Pack size25 kg
Pot lifeApprox. 45 mins. (depending on weather conditions)
Adjustment timeApprox. 30 mins. (depending on weather conditions)
Set to light foot traffic6 hours
ColoursGrey
Service temperatureFrom -30ºC to 90ºC

Typical values as Pidilite Puma prints them in the data sheet for Pegoland Fastflex. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Working time

Approx. 45 mins. (depending on weather conditions). Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

For quantity surveyors

BOQ clause.

Supply and apply Pegoland Fastflex, a tile adhesive manufactured by Pidilite Puma, classified C2FTE S1. Allow 4 to 6 kg/m2, as published by the manufacturer. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Pegoland Fastflex
ProductPegoland Fastflex
ManufacturerPidilite Puma
TypeTile Adhesive
ClassificationC2FTE S1
Consumption4 to 6 kg/m2
Pack size25 kg
Set time6 hours
Pot lifeApprox. 45 mins. (depending on weather conditions)
Unit of measurementm2

Frequently Asked Questions

Pegoland Fastflex is classified C2FTE S1 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: simple gluing: 4 kg/m2

25 kg

You can download the official Pegoland Fastflex technical data sheet as a PDF directly from this page, revision 2026_6, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Pegoland Fastflex in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Pegoland Fastflex you need, or describe the job and we will work it out with you.

Chat on WhatsApp