Pegoland Flex tile adhesive pack
Pidilite Puma's own picture. The pack we stock: 25 kg.

Pidilite Puma Tile AdhesiveNo. 09 / 12

Pegoland Flex Technical Data Sheet (TDS)

Tile Adhesive to C2 TE S1.

Deformability gets specified out of habit far more often than it is needed, and the S1 rating on Pegoland Flex answers a specific list. The sheet recommends it for exterior facade work, large area flooring and underfloor heating, and widens the tile schedule to slate, glass mosaic and large format pieces, with trowel guidance running to slabs of 360 cm.

  • Exterior facade installations
  • Large area flooring with heavy traffic
  • Large format tiles and slate
  • Floors with underfloor heating
  • Tiling over cementitious waterproofing
  • Swimming pools and other wet areas
Data sheet1.4 MB

Build a list across products and send it once, or ask about Pegoland Flex on WhatsApp now.

Class
C2 TE S1
Consumption
4 to 6 kg/m²
Pack we stock
25 kg
Colour
Grey, White

About Pegoland Flex

It is also the first grade here cleared for tiling over cementitious waterproofing, which settles most UAE wet room and podium details. Classified C2 TE with S1 deformability to EN 12002, it records 1.6 to 2.61 N/mm2 at 28 days and holds 1.4 to 2.3 N/mm2 after a 30 minute open time. Mixing water is 23 to 25 per cent. Where none of those conditions apply, Dos Plus does the same work for less. Extrawhite, white and grey, 25 kg bags.

Documentation

Related documentation

  • Technical data sheet

    Revision 2026_05 · 1.4 MB · PDF

    Pegoland Flex as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

How it is being applied

As published in the data sheet

300kg

  • Double gluing: 6 kg/m2
  • over 50 m2

Order 12 packs of 25 kg bag

Send this quantity for a quote

Taken from the Pegoland Flex data sheet: Approximate yield: single gluing 4 Kg/m2, double gluing 6 Kg/m2. No site allowance is added unless you turn one on. The sheet chooses the trowel by the area of the tile, not the length of its side: up to 100 cm2 a U4, up to 450 cm2 a U6, up to 900 cm2 double or single gluing, and over 900 cm2 double gluing. A 600 by 600 tile is 3600 cm2, so the calculator starts on double gluing.

Application

Where it is used.

  1. 01Exterior facade installations
  2. 02Large area flooring with heavy traffic
  3. 03Large format tiles and slate
  4. 04Floors with underfloor heating
  5. 05Tiling over cementitious waterproofing
  6. 06Swimming pools and other wet areas

Specification

Technical data.

  • C2 TE S1
  • EN 12004 and ISO 13007
Pegoland Flex technical specifications from the manufacturer TDS
ClassificationC2 TE
Coveragesingle gluing: 4 Kg/m2
Pack size25 kg
Pot lifeApprox. 2 hours (depending on weather conditions)
Adjustment timeApprox. 30 min. (depending on weather conditions)
ColoursGrey, White
Mixing ratioPegoland Flex Extrawhite: 25±1%
Bond strength≥ 1 N/mm2 1,6 - 2,61
Application temperaturefrom 5ºC to 40ºC
Storage and shelf life1 year, in sealed original packaging, sheltered from weather conditions and humidity
Service temperature-30ºC a 90ºC

Typical values as Pidilite Puma prints them in the data sheet for Pegoland Flex. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

Pegoland Flex Extrawhite: 25±1%. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

Approx. 2 hours (depending on weather conditions). Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

1 year, in sealed original packaging, sheltered from weather conditions and humidity in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Pegoland Flex, a tile adhesive manufactured by Pidilite Puma, classified C2 TE S1. Allow 4 to 6 kg/m2, as published by the manufacturer. Mix at Pegoland Flex Extrawhite: 25±1%. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Pegoland Flex
ProductPegoland Flex
ManufacturerPidilite Puma
TypeTile Adhesive
ClassificationC2 TE S1
Consumption4 to 6 kg/m2
Pack size25 kg
Mixing ratioPegoland Flex Extrawhite: 25±1%
Pot lifeApprox. 2 hours (depending on weather conditions)
Unit of measurementm2

Frequently Asked Questions

Pegoland Flex is classified C2 TE S1 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: single gluing: 4 Kg/m2

25 kg

You can download the official Pegoland Flex technical data sheet as a PDF directly from this page, revision 2026_05, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Pegoland Flex in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Pegoland Flex you need, or describe the job and we will work it out with you.

Chat on WhatsApp