Pegoland Superflex tile adhesive pack
Pidilite Puma's own picture. The pack we stock: 25 kg.

Pidilite Puma Tile AdhesiveNo. 10 / 12

Pegoland Superflex Technical Data Sheet (TDS)

Tile Adhesive to C2 TE S2.

The number that sets Pegoland Superflex apart is on the wall: 60 kg per square metre of tile or stone, against 40 for the grades below it. S2 deformability to EN 12002 is what allows that, and the sheet pairs it with facades, large format thin porcelain slabs, slate, pools and wet areas, heavy traffic floors and tiling over cementitious waterproofing.

  • Facade tiling with mechanical fixing
  • Large format thin porcelain slabs
  • Slate and other natural stone
  • Swimming pool and wet area tiling
  • Tiling over cementitious waterproofing
  • Heavy traffic floors over large areas
Data sheet0.8 MB

Build a list across products and send it once, or ask about Pegoland Superflex on WhatsApp now.

Class
C2 TE S2
Consumption
4 to 6 kg/m²
Pack we stock
25 kg
Colour
Grey, White

About Pegoland Superflex

On strength it reads as a C2 TE adhesive, holding at least 1 N/mm2 initially and after water immersion, heat ageing and freeze thaw alike, with mixing water down at 17 to 21 per cent. Price it only after reading the facade clause: formats above 2400 cm2, a side over 60 cm, more than 40 kg per square metre or work above three metres all call for mechanical fixing alongside the adhesive, which covers most Dubai tower cladding. 25 kg bags, floors grouted after 48 hours.

Documentation

Related documentation

  • Technical data sheet

    Revision 2025_12 · 0.8 MB · PDF

    Pegoland Superflex as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

How it is being applied

As published in the data sheet

300kg

  • Double gluing: 6 kg/m2
  • over 50 m2

Order 12 packs of 25 kg bag

Send this quantity for a quote

Taken from the Pegoland Superflex data sheet: Approximate yield: single gluing 4 Kg/m2, double gluing 6 Kg/m2. No site allowance is added unless you turn one on. The sheet chooses the trowel by the area of the tile, not the length of its side: up to 100 cm2 a U4, up to 450 cm2 a U6, up to 900 cm2 double or single gluing, and over 900 cm2 double gluing. A 600 by 600 tile is 3600 cm2, so the calculator starts on double gluing.

Application

Where it is used.

  1. 01Facade tiling with mechanical fixing
  2. 02Large format thin porcelain slabs
  3. 03Slate and other natural stone
  4. 04Swimming pool and wet area tiling
  5. 05Tiling over cementitious waterproofing
  6. 06Heavy traffic floors over large areas

Specification

Technical data.

  • C2 TE S2
  • EN 12004 and ISO 13007
Pegoland Superflex technical specifications from the manufacturer TDS
ClassificationC2 TE
CoverageSingle gluing:4 Kg/m2
Pack size25 kg
Pot lifeApproximately. 2 h. (according to environmental conditions)
Adjustment timeApproximately. 30 min. (depending on environmental conditions)
Waiting time before grouting≥ 48H
ColoursGrey, White
Bond strength≥ 1,0 N/mm2
Application temperaturefrom 5ºC to 40ºC
Storage and shelf life1 year in sealed original packaging, sheltered from weather conditions and humidity
Service temperature-30ºC a 90ºC

Typical values as Pidilite Puma prints them in the data sheet for Pegoland Superflex. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Working time

Approximately. 2 h. (according to environmental conditions). Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

1 year in sealed original packaging, sheltered from weather conditions and humidity in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Pegoland Superflex, a tile adhesive manufactured by Pidilite Puma, classified C2 TE S2. Allow 4 to 6 kg/m2, as published by the manufacturer. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Pegoland Superflex
ProductPegoland Superflex
ManufacturerPidilite Puma
TypeTile Adhesive
ClassificationC2 TE S2
Consumption4 to 6 kg/m2
Pack size25 kg
Pot lifeApproximately. 2 h. (according to environmental conditions)
Unit of measurementm2

Frequently Asked Questions

Pegoland Superflex is classified C2 TE S2 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: Single gluing:4 Kg/m2

25 kg

You can download the official Pegoland Superflex technical data sheet as a PDF directly from this page, revision 2025_12, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Pegoland Superflex in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Pegoland Superflex you need, or describe the job and we will work it out with you.

Chat on WhatsApp