Pegoland Uno tile adhesive pack
Pidilite Puma's own picture. The pack we stock: 20 kg.

Pidilite Puma Tile AdhesiveNo. 11 / 12

Pegoland Uno Technical Data Sheet (TDS)

Tile Adhesive to C1.

Read next to Pegoland Classic, the Uno sheet describes the same job and the same C1 classification: interior walls and floors, exterior floors, absorbent ceramic over conventional cement based substrates, 30 kg per square metre maximum on a vertical face. Two things separate the pair on paper.

  • Interior wall and floor tiling
  • Exterior floor tiling
  • Ceramic tiles with medium to high absorption
  • Conventional cement based screeds
  • Tile formats up to 450 cm2 single bonded
Data sheet1.1 MB

Build a list across products and send it once, or ask about Pegoland Uno on WhatsApp now.

Class
C1
Consumption
4 to 6 kg/m²
Pack we stock
20 kg
Colour
Grey, White

About Pegoland Uno

Measured tensile adhesion is quoted from 1.1 to 1.79 N/mm2 against the 0.5 requirement, a little above the Classic figures, and the packaging line covers 20 and 25 kg bags rather than 20 alone. Neither moves it up the ladder. There is no T for reduced slip and no E for extended open time, so adjustment stays near 20 minutes and tiles must follow the trowel quickly, faster still in hot or windy UAE conditions where the sheet also wants the substrate damped first. Grey or white, 4 kg per square metre single bonded, one year shelf life.

Documentation

Related documentation

  • Technical data sheet

    Revision 2025_10 · 1.1 MB · PDF

    Pegoland Uno as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

How it is being applied

As published in the data sheet

300kg

  • Double gluing: 6 kg/m2
  • over 50 m2

Order 12 packs of 25 kg bag

Send this quantity for a quote

Taken from the Pegoland Uno data sheet: Approximate yield: simple gluing 4 Kg/m2, double gluing 6 Kg/m2. No site allowance is added unless you turn one on. The sheet chooses the trowel by the area of the tile, not the length of its side: up to 100 cm2 a U4, up to 450 cm2 a U6, up to 900 cm2 double or single gluing, and over 900 cm2 double gluing. A 600 by 600 tile is 3600 cm2, so the calculator starts on double gluing.

Application

Where it is used.

  1. 01Interior wall and floor tiling
  2. 02Exterior floor tiling
  3. 03Ceramic tiles with medium to high absorption
  4. 04Conventional cement based screeds
  5. 05Tile formats up to 450 cm2 single bonded

Where it is not the right product

  • Under porcelain or any tile with very low water absorption, which needs a C2 adhesive
  • For large format tiles, where a deformable C2 S1 or S2 adhesive is required
  • On facades or substrates that move, which need a deformable adhesive

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • C1
  • EN 12004 and ISO 13007
Pegoland Uno technical specifications from the manufacturer TDS
CoverageSimple gluing: 4 Kg/m2
Pack size20 kg
Pot lifeApprox. 2 hours (depending on weather conditions)
Adjustment timeApprox. 20 min. (depending on weather conditions)
ColoursGrey, White
Mixing ratioPegoland UNO White: 24±1%
Bond strength≥ 0,5 N/mm2 1,1 - 1,79
Application temperaturefrom 5ºC to 40ºC
Storage and shelf life1 year in sealed original packaging, sheltered from weather conditions and humidity

Typical values as Pidilite Puma prints them in the data sheet for Pegoland Uno. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

20 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

Pegoland UNO White: 24±1%. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

Approx. 2 hours (depending on weather conditions). Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

1 year in sealed original packaging, sheltered from weather conditions and humidity in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Pegoland Uno, a tile adhesive manufactured by Pidilite Puma, classified C1. Allow 4 to 6 kg/m2, as published by the manufacturer. Mix at Pegoland UNO White: 24±1%. Supplied in 20 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Pegoland Uno
ProductPegoland Uno
ManufacturerPidilite Puma
TypeTile Adhesive
ClassificationC1
Consumption4 to 6 kg/m2
Pack size20 kg
Mixing ratioPegoland UNO White: 24±1%
Pot lifeApprox. 2 hours (depending on weather conditions)
Unit of measurementm2

Frequently Asked Questions

Pegoland Uno is classified C1 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: Simple gluing: 4 Kg/m2

20 kg

You can download the official Pegoland Uno technical data sheet as a PDF directly from this page, revision 2025_10, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Pegoland Uno in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Pegoland Uno you need, or describe the job and we will work it out with you.

Chat on WhatsApp