
Pidilite Puma Tile AdhesiveNo. 12 / 12
Pegoland Uno Plus Technical Data Sheet (TDS)
Tile Adhesive to C1 TE.
The two letters added to Pegoland Uno Plus are what the extra money buys. T is reduced slip, so a wall tile stays where it is placed, and E is extended open time, measured here at 30 minutes with tensile adhesion still recorded at 0.9 to 1.2 N/mm2 at that point.
- All types of ceramic, porcelain and natural stone
- Interior wall and exterior floor coverings
- Plasterboard and gypsum board substrates
- Interior tile over tile installations
- Swimming pool tiling
- Granite and marble pieces
Build a list across products and send it once, or ask about Pegoland Uno Plus on WhatsApp now.
- Class
- C1 TE
- Consumption
- 4 to 6 kg/m²
- Pack we stock
- 25 kg
- Colour
- Grey, White
About Pegoland Uno Plus
With them the scope widens from absorbent ceramic to all types of ceramic, porcelain, granite, marble and natural stone, adds plasterboard and gypsum board substrates, interior tile over tile and swimming pools, and lifts the vertical limit to 40 kg per square metre. Water retention is high enough that neither tile nor substrate needs wetting first, which removes a step easy to get wrong on a summer UAE site. Strength is still C1 though, and for slate the sheet sends you to Superflex. Grey and white, 25 kg bags, adjustable for roughly 30 minutes.
Documentation
Related documentation
Technical data sheet
Revision 2025_10 · 1.6 MB · PDF
Pegoland Uno Plus as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
As published in the data sheet
300kg
- Double gluing: 6 kg/m2
- over 50 m2
Order 12 packs of 25 kg bag
Taken from the Pegoland Uno Plus data sheet: Approximate yield: simple gluing 4 Kg/m2, double gluing 6 Kg/m2. No site allowance is added unless you turn one on. The sheet chooses the trowel by the area of the tile, not the length of its side: up to 100 cm2 a U4, up to 450 cm2 a U6, up to 900 cm2 double or single gluing, and over 900 cm2 double gluing. A 600 by 600 tile is 3600 cm2, so the calculator starts on double gluing.
Application
Where it is used.
- 01All types of ceramic, porcelain and natural stone
- 02Interior wall and exterior floor coverings
- 03Plasterboard and gypsum board substrates
- 04Interior tile over tile installations
- 05Swimming pool tiling
- 06Granite and marble pieces
Where it is not the right product
- Under porcelain or any tile with very low water absorption, which needs a C2 adhesive
- For large format tiles, where a deformable C2 S1 or S2 adhesive is required
- On facades or substrates that move, which need a deformable adhesive
- On external walls, where a cementitious plaster is required
- In bathrooms, kitchens or any permanently wet area
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- C1 TE
- EN 12004 and ISO 13007
| Classification | C1 TE |
|---|---|
| Coverage | Simple gluing: 4 Kg/m2 |
| Pack size | 25 kg |
| Pot life | Approx. 2 hours (depending on weather conditions) |
| Adjustment time | Approx. 30 min. (depending on weather conditions) |
| Colours | Grey, White |
| Mixing ratio | Pegoland UNO PLUS White: 24±1% |
| Bond strength | ≥ 0,5 N/mm2 1,4 - 1,9 |
| Application temperature | from 5ºC to 40ºC |
| Storage and shelf life | 1 year in sealed original packaging, sheltered from weather conditions and humidity |
Typical values as Pidilite Puma prints them in the data sheet for Pegoland Uno Plus. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
Pegoland UNO PLUS White: 24±1%. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
Approx. 2 hours (depending on weather conditions). Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
1 year in sealed original packaging, sheltered from weather conditions and humidity in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Pegoland Uno Plus, a tile adhesive manufactured by Pidilite Puma, classified C1 TE. Allow 4 to 6 kg/m2, as published by the manufacturer. Mix at Pegoland UNO PLUS White: 24±1%. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Pegoland Uno Plus |
|---|---|
| Manufacturer | Pidilite Puma |
| Type | Tile Adhesive |
| Classification | C1 TE |
| Consumption | 4 to 6 kg/m2 |
| Pack size | 25 kg |
| Mixing ratio | Pegoland UNO PLUS White: 24±1% |
| Pot life | Approx. 2 hours (depending on weather conditions) |
| Unit of measurement | m2 |
Frequently Asked Questions
Pegoland Uno Plus is classified C1 TE according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.
As per the TDS: Simple gluing: 4 Kg/m2
25 kg
You can download the official Pegoland Uno Plus technical data sheet as a PDF directly from this page, revision 2025_10, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Morcemcolor Epoxi
R2T / RG
View TDS and specifications

Morcemcolor Plus Flexible
CG2 A W
View TDS and specifications

Morcemcolor Universal Grout
CG2 A W
View TDS and specifications

Pegoland Classic
C1
View TDS and specifications

Pegoland Dos
C2 T
View TDS and specifications

Pegoland Dos Plus
C2 TE
View TDS and specifications
All Tile Adhesives and GroutsEvery Pidilite Puma product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
Notched trowels comb the bed to an even depth, so the coverage under the tile is the coverage on the sheet.
View the range
Keiser
Mixing Applications
A paddle mix at the water ratio the sheet states is where the open time and the grab come from.
View the range
Peygran
Levelling
Levelling clips and wedges hold two tiles flush to each other while the adhesive sets.
View the range
Montolit
Masterpiuma P5
Cuts large format porcelain to the setting out line before the bed goes down.
View the range
Pegoland Uno Plus in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Pidilite Puma from Dubai, Abu Dhabi and Sharjah. Send the quantity of Pegoland Uno Plus you need, or describe the job and we will work it out with you.