
Mapei Flooring AdhesiveNo. 01 / 79
Adesilex G19 Technical Data Sheet (TDS)
Mapei flooring adhesive.
Rubber, polyolefin and polyurethane backings shed ordinary dispersion adhesives, which is the gap a reactive product fills. Adesilex G19 is a two component epoxy polyurethane adhesive for resilient and textile coverings, mixed 94 parts A to 6 parts B and applied between +10°C and +30°C.
- Resilient and LVT floor coverings
- Textile and carpet coverings
- Rubber, polyolefin and polyurethane backed materials
- Installation of athletic tracks
- Static dissipative flooring build ups
Build a list across products and send it once, or ask about Adesilex G19 on WhatsApp now.
- Consumption
- 0.35 to 1 kg/m²
- Pack we stock
- 10 kg
- Colour
- Beige, Conductive
Mapei document 00252
About Adesilex G19
Trowel choice sets consumption: 350 to 450 g/m² through a no. 1, rising to 550 to 750 g/m² through a no. 3 where the backing is deeply profiled. Pot life runs 50 to 60 minutes, open time 60 minutes, and a covering can still be adjusted at 90 minutes, with the floor set in 12 to 24 hours. A conductive shade covers static dissipative build ups, and the same adhesive installs athletic track surfaces. Keep the 10 kg kit out of the sun before mixing.
Documentation
Related documentation
Technical data sheet
1.0 MB · PDF
Adesilex G19 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
22.5 to 27.5kg
- Trowel No. 2 or TKB B1, B2: 0.45 to 0.55 kg/m2
- over 50 m2
Order 3 packs of 10 kg kit
Taken from the Adesilex G19 data sheet: CONSUMPTION: trowel No. 1 or TKB A1/A2 350 to 450 g/m2, trowel No. 2 or TKB B1, B2 450 to 550 g/m2, trowel No. 3 or TKB C1 550 to 750 g/m2, trowel No. 4 750 to 1000 g/m2. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. Two component, supplied in pre measured kits of component A 9.4 parts and component B 0.6 parts by weight, so the rate is of the mixed adhesive. Also supplied in 5 kg and 2 kg kits.
Application
Where it is used.
- 01Resilient and LVT floor coverings
- 02Textile and carpet coverings
- 03Rubber, polyolefin and polyurethane backed materials
- 04Installation of athletic tracks
- 05Static dissipative flooring build ups
Specification
Technical data.
| Coverage | Consumption varies according to the flatness of the substrate and the type of backing on the flooring material (and, therefore, the type of trowel used): ▪ trowel No. 1 or TKB A1/A2: 350-450 g/m²; ▪ trowel No. 2 or TKB B1; B2: 450-550 g/m²; ▪ trowel No. 3 or TKB C1: 550-750 g/m²; ▪ trowel No. 4: 750 |
|---|---|
| Pack size | 10 kg |
| Pot life | 50-60 minutes |
| Open time | 60 minutes |
| Adjustment time | 90 minutes |
| Set to light foot traffic | 12-24 hours |
| Colours | Beige, Conductive |
| Mixing ratio | component A : component B = 94 : 6 |
| Application temperature | from +10°C to +30°C |
| Consistency | thick paste fluid liquid |
| Storage and shelf life | Adesilex G19 remains stable for at least 24 months under normal environmental conditions in its original, sealed packaging. |
| Density | 1.5 0.92 g/cm³ |
Typical values as Mapei prints them in the data sheet for Adesilex G19. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
component A : component B = 94 : 6. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
50-60 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Adesilex G19 remains stable for at least 24 months under normal environmental conditions in its original, sealed packaging. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Adesilex G19, a flooring adhesive manufactured by Mapei. Allow 0.35 to 1 kg/m2, as published by the manufacturer. Mix at component A : component B = 94 : 6. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Adesilex G19 |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Consumption | 0.35 to 1 kg/m2 |
| Pack size | 10 kg |
| Mixing ratio | component A : component B = 94 : 6 |
| Set time | 12-24 hours |
| Pot life | 50-60 minutes |
| Open time | 60 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Consumption varies according to the flatness of the substrate and the type of backing on the flooring material (and, therefore, the type of trowel used): ▪ trowel No. 1 or TKB A1/A2: 350-450 g/m²; ▪ trowel No. 2 or TKB B1; B2: 450-550 g/m²; ▪ trowel No. 3 or TKB C1: 550-750 g/m²; ▪ trowel No. 4: 750
10 kg
You can download the official Adesilex G19 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications

Mapecoat PU 20
SRI 108
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Adesilex G19 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Adesilex G19 you need, or describe the job and we will work it out with you.

