
Mapei Flooring SystemNo. 03 / 79
Adesilex MT 32 Technical Data Sheet (TDS)
Mapei flooring system.
Wall coverings sit in the same trade as resilient flooring and follow the same logic one plane up. Adesilex MT 32 is a single component adhesive in water dispersion for wall coverings, a creamy white paste applied with a trowel, roller or brush.
- Wall coverings in water dispersion adhesive
- Resilient and textile wall finishes
- Trowel, roller or brush application
- Occupied interiors needing low emission adhesives
- Commercial fit out wall covering work
Build a list across products and send it once, or ask about Adesilex MT 32 on WhatsApp now.
- Consumption
- 0.15 to 0.25 kg/m²
- Pack we stock
- 10 kg
- Colour
- white
Mapei document 00281
About Adesilex MT 32
Consumption follows the tool: roughly 150 g/m² by brush, about 200 g/m² by roller, 200 to 250 g/m² through a Mapei no. 1 trowel and 150 to 250 g/m² through a TKB A1 to A4 notch. Open time is a maximum of 30 minutes and the application range is +10°C to +35°C. EC1 Plus marks it as very low emission for occupied interiors. Shelf life is 12 months, shorter than most of this range, so check the batch date before committing to a large UAE fit out order.
Documentation
Related documentation
Technical data sheet
1.2 MB · PDF
Adesilex MT 32 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
10.0 to 12.5kg
- MAPEI No. 1 trowel: 0.2 to 0.25 kg/m2
- over 50 m2
Order 1 pack of 20 kg bucket
Taken from the Adesilex MT 32 data sheet: CONSUMPTION: coverage varies, depending on the evenness of the walls and the back of the wall covering. MAPEI No. 1 trowel from 200 to 250 g/m2, trowel TKB A1/A4 150 to 250 g/m2, roller approx. 200 g/m2, brush approx. 150 g/m2. No site allowance is added unless you turn one on. The rows are tools, not sizes, and they are in the sheet's printed order, so the default is the sheet's own first row and also its highest rate rather than the cheapest. The sheet prints the figures in grammes per square metre: 200 to 250 g/m2 is 0.2 to 0.25 kg/m2. Also supplied in 10, 5 and 1 kg buckets. On dusty or absorbent substrates the sheet asks for a primer first, or a coat of Adesilex MT32 itself diluted 1 to 2 with water, which is extra.
Application
Where it is used.
- 01Wall coverings in water dispersion adhesive
- 02Resilient and textile wall finishes
- 03Trowel, roller or brush application
- 04Occupied interiors needing low emission adhesives
- 05Commercial fit out wall covering work
Specification
Technical data.
- EN 13813
- EMICODE EC1 Plus - very low emission
| Coverage | Coverage varies, depending on the evenness of the walls and the back of the wall covering. ▪ MAPEI No. 1 trowel: from 200 to 250 g/m² ▪ Trowel TKB A1/A4: 150-250 g/m². ▪ Roller: approx. 200 g/m² ▪ Brush: approx. 150 g/m² |
|---|---|
| Pack size | 10 kg, 5 kg |
| Open time | maximum 30 minutes |
| Set to light foot traffic | from 0 to 10 minutes |
| Colours | white |
| Application temperature | from +10°C to +35°C |
| Consistency | creamy paste |
| Storage and shelf life | Protect from frost during shipping and storage. Avoid prolonged exposure to temperatures below 0°C. In normal environments Adesilex MT32 is stable for 12 months in its original sealed packaging. |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.10 g/cm³ |
| Dry solids | 23% |
Typical values as Mapei prints them in the data sheet for Adesilex MT 32. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg, 5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Protect from frost during shipping and storage. Avoid prolonged exposure to temperatures below 0°C. In normal environments Adesilex MT32 is stable for 12 months in its original sealed packaging. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Adesilex MT 32, a flooring system manufactured by Mapei. Allow 0.15 to 0.25 kg/m2, as published by the manufacturer. Supplied in 10 kg, 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Adesilex MT 32 |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring System |
| Consumption | 0.15 to 0.25 kg/m2 |
| Pack size | 10 kg, 5 kg |
| Set time | from 0 to 10 minutes |
| Open time | maximum 30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Coverage varies, depending on the evenness of the walls and the back of the wall covering. ▪ MAPEI No. 1 trowel: from 200 to 250 g/m² ▪ Trowel TKB A1/A4: 150-250 g/m². ▪ Roller: approx. 200 g/m² ▪ Brush: approx. 150 g/m²
10 kg, 5 kg
You can download the official Adesilex MT 32 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications

Mapecoat PU 20
SRI 108
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Adesilex MT 32 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Adesilex MT 32 you need, or describe the job and we will work it out with you.

