
Mapei Repair MortarNo. 02 / 79
Adesilex GP Technical Data Sheet (TDS)
Mapei repair mortar.
Not every layer in a floor build up is a covering. Adesilex GP is a high strength two component thixotropic epoxy bedding and repair mortar, mixed three parts A to one part B and used for structural bonding and for rebuilding concrete where a floor has broken down.
- Structural bonding of concrete elements
- Repairing damaged concrete floors
- Bedding mortar for precast and steel fixings
- Vertical and overhead repair details
- Hot weather site repair work
Build a list across products and send it once, or ask about Adesilex GP on WhatsApp now.
- Consumption
- 1.8 kg/m² per mm
- Pack we stock
- 10 kg
- Colour
- grey white
Mapei document 11102 · revision 6-2025
About Adesilex GP
Being thixotropic it stays where it is placed on a vertical face or an overhead soffit rather than sagging out of the detail. Consumption is 1.80 kg/m² per millimetre of thickness, so the 10 kg pack is sized for detail work rather than whole areas, and pot life is 60 minutes once the components meet. The application window of +15°C to +45°C is unusually wide and covers an open UAE site in summer, although the hotter the substrate the faster that hour disappears.
Documentation
Related documentation
Technical data sheet
Revision 6-2025 · 0.4 MB · PDF
Adesilex GP as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 10 mm.
As published in the data sheet
900kg
- 1.8 kg/m2 per mm
- 10 mm thick
- over 50 m2
Order 90 packs of 10 kg kit (A 7.5 kg plus B 2.5 kg)
Taken from the Adesilex GP data sheet: CONSUMPTION: 1.80 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. An epoxy mortar applied in thicknesses up to 1 cm, including on vertical structures. The sheet prints no minimum, so the 1 mm lower bound is an input limit, and the default is the printed maximum.
Application
Where it is used.
- 01Structural bonding of concrete elements
- 02Repairing damaged concrete floors
- 03Bedding mortar for precast and steel fixings
- 04Vertical and overhead repair details
- 05Hot weather site repair work
Specification
Technical data.
- EN 1504
| Coverage | 1.80 kg/m² per mm of thickness. |
|---|---|
| Pack size | 10 kg |
| Pot life | 60 minutes |
| Colours | grey white |
| Mixing ratio | component A : component B = 3 : 1 |
| Application temperature | from +15°C to +45°C |
| Consistency | thick paste |
| Storage and shelf life | 24 months in their original packaging. Store the product at temperatures not below +10°C. |
| Density | 1.96 1.91 g/cm³ |
Typical values as Mapei prints them in the data sheet for Adesilex GP. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
component A : component B = 3 : 1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
60 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
24 months in their original packaging. Store the product at temperatures not below +10°C. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Adesilex GP, a repair mortar manufactured by Mapei. Allow 1.8 kg/m2 per mm, as published by the manufacturer. Mix at component A : component B = 3 : 1. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Adesilex GP |
|---|---|
| Manufacturer | Mapei |
| Type | Repair Mortar |
| Consumption | 1.8 kg/m2 per mm |
| Pack size | 10 kg |
| Mixing ratio | component A : component B = 3 : 1 |
| Pot life | 60 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 1.80 kg/m² per mm of thickness.
10 kg
You can download the official Adesilex GP technical data sheet as a PDF directly from this page, revision 6-2025, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications

Mapecoat PU 20
SRI 108
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
Adesilex GP in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Adesilex GP you need, or describe the job and we will work it out with you.