
Mapei Flooring AdhesiveNo. 05 / 79
Lignobond Chiaro Technical Data Sheet (TDS)
Mapei flooring adhesive.
Lignobond Chiaro is the light shade of the Mapei two component epoxy polyurethane parquet adhesive, nine parts of component A to one part of component B by weight, with no water and no solvent in it. The substrate is what decides it.
- Bonding lamparquet, solid hardwood strips and planks
- Parquet over cementitious and anhydrite screeds
- Wood over Mapecem, Mapecem Pronto, Topcem and Topcem Pronto screeds
- Wood over old ceramic, marble or terrazzo floors and metal sheets
- Parquet on heated substrates
- Any size and type of parquet on substrates that are not absorbent
Build a list across products and send it once, or ask about Lignobond Chiaro on WhatsApp now.
- Consumption
- 0.8 to 1 kg/m²
- Pack we stock
- 10 kg
- Colour
- Brown and beige
Mapei document 00271 · revision 4-2016
About Lignobond Chiaro
Hardened at about 24 hours, it bonds to surfaces that are not absorbent, so old ceramic, marble, terrazzo and metal sheet take wood with no separate resin primer, and heated screeds are covered as well. Ultrabond P990 1K asks for no mixing but the sheet keeps it to interlocking prefinished boards; Lignobond takes lamparquet, solid strips and planks of any size, at the cost of holding the 90 to 10 ratio and working inside a 60 minute pot life. Laid with the Mapei trowel for wood it takes 800 to 1000 g per square metre. Foot traffic at 24 hours, sanding at about three days.
Documentation
Related documentation
Technical data sheet
Revision 4-2016 · 2.0 MB · PDF
Lignobond Chiaro as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
40.0 to 50.0kg
- MAPEI trowel for wood: 0.8 to 1 kg/m2
- over 50 m2
Order 4 to 5 packs of 10 kg kit, component A plus component B
Taken from the Lignobond Chiaro data sheet: CONSUMPTION: 800-1000 g/m2 with a MAPEI trowel for wood according to the type of substrate. The sheet quotes grammes per square metre; the rate is shown here in kilogrammes. No site allowance is added unless you turn one on. Two component, nine parts of A to one part of B by weight, and the figure is for the mixed adhesive. The sheet prints no trowel table, so there are no notch sizes to choose between. Also supplied in 5 kg kits.
Application
Where it is used.
- 01Bonding lamparquet, solid hardwood strips and planks
- 02Parquet over cementitious and anhydrite screeds
- 03Wood over Mapecem, Mapecem Pronto, Topcem and Topcem Pronto screeds
- 04Wood over old ceramic, marble or terrazzo floors and metal sheets
- 05Parquet on heated substrates
- 06Any size and type of parquet on substrates that are not absorbent
Specification
Technical data.
| Coverage | 800-1000 g/m2 with a MAPEI trowel for wood according to the type of substrate |
|---|---|
| Pack size | 5 and 10 kg kits |
| Pot life | 60 minutes |
| Open time | 60 minutes |
| Adjustment time | less than 2 hours |
| Set to light foot traffic | after 24 hours |
| Colours | Brown and beige |
| Mixing ratio | A : B = 90 : 10 |
| Bond strength | tensile bond strength EN 14293 greater than 2.0 N/mm2 after 7 and 28 days |
| Application temperature | from +10°C to +30°C |
| Consistency | component A thick paste, component B fluid paste |
| Storage and shelf life | at least 24 months in the original, sealed packaging in a normal environment |
| Density | component A 1.5 g/cm3, component B 1.2 g/cm3 |
| Dry solids | 100 % |
| Sanding time | after approximately 3 days |
| Service temperature | from -40°C to +100°C |
| Setting time by temperature | 3 hours at 30°C, 5 at 25°C, 8 at 20°C, 11 at 15°C, 18 at 10°C, 34 at 5°C |
Typical values as Mapei prints them in the data sheet for Lignobond Chiaro. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 and 10 kg kits. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
A : B = 90 : 10. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
60 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
at least 24 months in the original, sealed packaging in a normal environment in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Lignobond Chiaro, a flooring adhesive manufactured by Mapei. Allow 0.8 to 1 kg/m2, as published by the manufacturer. Mix at A : B = 90 : 10. Supplied in 5 and 10 kg kits. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Lignobond Chiaro |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring Adhesive |
| Consumption | 0.8 to 1 kg/m2 |
| Pack size | 5 and 10 kg kits |
| Mixing ratio | A : B = 90 : 10 |
| Set time | after 24 hours |
| Pot life | 60 minutes |
| Open time | 60 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 800-1000 g/m2 with a MAPEI trowel for wood according to the type of substrate
5 and 10 kg kits
You can download the official Lignobond Chiaro technical data sheet as a PDF directly from this page, revision 4-2016, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications

Mapecoat PU 20
SRI 108
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Lignobond Chiaro in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Lignobond Chiaro you need, or describe the job and we will work it out with you.

