
Mapei PrimerNo. 06 / 79
Mapecoat I 600 W Technical Data Sheet (TDS)
Mapei primer.
Primers decide whether a resin floor lasts, and a water based one widens where it can be used. Mapecoat I 600 W is a two component transparent epoxy primer in water dispersion, mixed 2.3 parts A to 3.6 parts B and applied at 0.15 to 0.50 kg/m² depending on how absorbent and rough the substrate is.
- Priming industrial resin flooring systems
- Vapour permeable epoxy resin systems
- Multi storey car park coating systems
- Preparation of sports surface subbases
- Impregnating, salt resistant and dust proof treatments
Build a list across products and send it once, or ask about Mapecoat I 600 W on WhatsApp now.
- Consumption
- 0.15 to 0.5 kg/m²
- Pack we stock
- 5.9 kg
- Colour
- transparent opalescent
Mapei document 02017
About Mapecoat I 600 W
It primes industrial resin flooring, sports surface, car park and waterproofing systems, and doubles as an impregnating, salt resistant and dust proof treatment. Vapour permeability is the reason to choose it over a solvent epoxy: it lets a slab release moisture instead of trapping it under the coat. The +8°C to +35°C window suits night work in a UAE summer, when a slab surface sits well above air temperature by mid afternoon.
Documentation
Related documentation
Technical data sheet
1.2 MB · PDF
Mapecoat I 600 W as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
7.50 to 25.0kg
- As printed: 0.15 to 0.5 kg/m2
- 1 coat
- over 50 m2
Order 2 to 5 packs of 5.9 kg kit, 2.3 kg part A plus 3.6 kg part B
Taken from the Mapecoat I 600 W data sheet: CONSUMPTION: 0.15 to 0.50 kg/m2. The real consumption depends on the absorption of the substrate, its roughness, kind of dilution, method of application. No site allowance is added unless you turn one on. A better than threefold spread, so the substrate choice carries the answer. The sheet dilutes it with water by weight to suit the use: 1:1 as a primer for Mapefloor I 500 W, 1:0.5 before Mapefloor Urban System, and 1:1 up to 1:5 as an adhesion primer on concrete depending on the absorption of the substrate. Also available as an 11.8 kg kit. The sheet prints a single range of 0.15 to 0.5 and no substrate table, so the calculator offers the range rather than splitting it into rows the manufacturer never published.
Application
Where it is used.
- 01Priming industrial resin flooring systems
- 02Vapour permeable epoxy resin systems
- 03Multi storey car park coating systems
- 04Preparation of sports surface subbases
- 05Impregnating, salt resistant and dust proof treatments
Specification
Technical data.
| Coverage | 0.15-0.50 kg/m². The real consumption depends on the absorption of the substrate, its roughness, kind of dilution, method of application etc. |
|---|---|
| Pack size | 5.9 kg, 2.3 kg, 3.6 kg |
| Colours | transparent opalescent |
| Mixing ratio | component A : component B: = 2.3 : 3.6 |
| Application temperature | +8°C to +35°C |
| Consistency | liquid liquid |
| Storage and shelf life | 24 months in its original packaging in a dry area at a temperature between +5°C and +30°C. PROTECT FROM FROST. |
| Density | 1.10 g/cm³ 1.07 g/cm³ |
Typical values as Mapei prints them in the data sheet for Mapecoat I 600 W. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5.9 kg, 2.3 kg, 3.6 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
component A : component B: = 2.3 : 3.6. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
24 months in its original packaging in a dry area at a temperature between +5°C and +30°C. PROTECT FROM FROST. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapecoat I 600 W, a primer manufactured by Mapei. Allow 0.15 to 0.5 kg/m2, as published by the manufacturer. Mix at component A : component B: = 2.3 : 3.6. Supplied in 5.9 kg, 2.3 kg, 3.6 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapecoat I 600 W |
|---|---|
| Manufacturer | Mapei |
| Type | Primer |
| Consumption | 0.15 to 0.5 kg/m2 |
| Pack size | 5.9 kg, 2.3 kg, 3.6 kg |
| Mixing ratio | component A : component B: = 2.3 : 3.6 |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 0.15-0.50 kg/m². The real consumption depends on the absorption of the substrate, its roughness, kind of dilution, method of application etc.
5.9 kg, 2.3 kg, 3.6 kg
You can download the official Mapecoat I 600 W technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat PU 20
SRI 108
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapecoat I 600 W in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapecoat I 600 W you need, or describe the job and we will work it out with you.

