
Mapei Flooring SystemNo. 29 / 79
Mapefloor CPU+/UD Technical Data Sheet (TDS)
Mapei flooring system.
The deepest build in this family goes down where the concrete beneath is poor or the duty is severe. Mapefloor CPU+/UD is a high performance polyurethane cement mortar for screeds from 6 to 12 mm, semi fluid, classified C50 and F10 with bond strength of at least 2 N/mm².
- Polyurethane cement screeds from 6 to 12 mm
- Flooring systems for the food industry
- Flooring systems for the chemical and pharmaceutical industry
- Heavy duty washdown and point loaded floors
- Industrial resin flooring construction
Build a list across products and send it once, or ask about Mapefloor CPU+/UD on WhatsApp now.
- Consumption
- 2 kg/m² per mm
- Pack we stock
- 19 kg
- Colour
- Milky white Dark brown White grey
About Mapefloor CPU+/UD
Consumption is about 2.0 kg/m² per millimetre, giving 12 kg/m² at 6 mm, 18 kg/m² at 9 mm and 24 kg/m² at 12 mm. Extra thickness is what carries point loads and absorbs the thermal shock of a washdown cycle without debonding, which is why food and pharmaceutical plants specify polyurethane cement rather than epoxy. Pot life is 15 minutes at +23°C. Order against a measured UAE area, because at 24 kg/m² a survey error gets expensive quickly.
Documentation
Related documentation
Technical data sheet
1.1 MB · PDF
Mapefloor CPU+/UD as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 6 to 12 mm.
As published in the data sheet
600kg
- 2 kg/m2 per mm
- 6 mm thick
- over 50 m2
Taken from the Mapefloor CPU+/UD data sheet: CONSUMPTION: Mapefloor CPU+/UD approx. 2.0 kg/m2 per mm thickness. 6 mm thickness approx. 12 kg/m2, 9 mm thickness approx. 18 kg/m2, 12 mm thickness approx. 24 kg/m2. No site allowance is added unless you turn one on. The printed rate is linear and reproduces every printed row exactly: 6 mm thickness approx. 12 kg/m2, 9 mm thickness approx. 18 kg/m2, 12 mm thickness approx. 24 kg/m2. The control is bounded by the thicknesses the sheet prints. Consumption is influenced by the roughness and absorption of the substrate and by site conditions. No pack is offered because the product is mixed from several packs: component A 2 kg, component B 2.16 kg, component C 19 kg bag and Mapecolor CPU+ 0.23 kg.
Application
Where it is used.
- 01Polyurethane cement screeds from 6 to 12 mm
- 02Flooring systems for the food industry
- 03Flooring systems for the chemical and pharmaceutical industry
- 04Heavy duty washdown and point loaded floors
- 05Industrial resin flooring construction
Specification
Technical data.
- EN 13813
| Coverage | Mapefloor CPU+/UD: approx. 2.0 kg/m per mm thickness 6 mm thickness: approx. 12 kg/m 9 mm thickness: approx. 18 kg/m 12 mm thickness: approx. 24 kg/m The consumption is influenced by the roughness and absorption of the substrate as well as by the environmental and working conditions of the job site. |
|---|---|
| Pack size | 19 kg |
| Pot life | at +23°C: 15 min |
| Colours | Milky white Dark brown White grey |
| Mixing ratio | by weight: A + B + C + Mapecolor CPU+: 2.0 / 2.16 / 19 / 0.23 |
| Bond strength | (EN 13892-8): ≥ 2 N/mm |
| Consistency | of the mix: semi-fluid |
| Storage and shelf life | 12 months in the original sealed packaging and kept in a dry and sheltered spot at temperatures between +10°C and +30°C. Components A and B can be damaged by frost. Mapefloor CPU+/UD part C is sensitive to humidity. 2 2 2 2 |
| Density | 1 - 1.05 g/cm³ 1.2 g/cm³ - 1.30 - 1.60 g/cm³ |
| Compressive strength | EN 13892-2 from C5 to C80 C50 |
| Flexural strength | EN 13892-2 from F1 to F50 F10 |
Typical values as Mapei prints them in the data sheet for Mapefloor CPU+/UD. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
19 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
by weight: A + B + C + Mapecolor CPU+: 2.0 / 2.16 / 19 / 0.23. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
at +23°C: 15 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in the original sealed packaging and kept in a dry and sheltered spot at temperatures between +10°C and +30°C. Components A and B can be damaged by frost. Mapefloor CPU+/UD part C is sensitive to humidity. 2 2 2 2 in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Mapefloor CPU+/UD, a flooring system manufactured by Mapei. Allow 2 kg/m2 per mm, as published by the manufacturer. Mix at by weight: A + B + C + Mapecolor CPU+: 2.0 / 2.16 / 19 / 0.23. Supplied in 19 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Mapefloor CPU+/UD |
|---|---|
| Manufacturer | Mapei |
| Type | Flooring System |
| Consumption | 2 kg/m2 per mm |
| Pack size | 19 kg |
| Mixing ratio | by weight: A + B + C + Mapecolor CPU+: 2.0 / 2.16 / 19 / 0.23 |
| Pot life | at +23°C: 15 min |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Mapefloor CPU+/UD: approx. 2.0 kg/m per mm thickness 6 mm thickness: approx. 12 kg/m 9 mm thickness: approx. 18 kg/m 12 mm thickness: approx. 24 kg/m The consumption is influenced by the roughness and absorption of the substrate as well as by the environmental and working conditions of the job site.
19 kg
You can download the official Mapefloor CPU+/UD technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex G19
View TDS and specifications

Adesilex GP
View TDS and specifications

Adesilex MT 32
View TDS and specifications

Cleaner L
View TDS and specifications

Lignobond Chiaro
View TDS and specifications

Mapecoat I 600 W
View TDS and specifications
All Flooring SystemsEvery Mapei product and the distributor page
Mapefloor CPU+/UD in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Mapefloor CPU+/UD you need, or describe the job and we will work it out with you.

