
Mapei MicrocementNo. 22 / 24
Ultratop Loft F Technical Data Sheet (TDS)
Microcement to CE EN 13813 CT C25 F10 A9 A2 S1 A2 S1 D0.
Decorative rather than corrective, Ultratop Loft F is a one component coarse textured cementitious paste trowelled on in thin coats to create floors and walls with a trowelled or mottled finish. It is a finished wearing surface, not a levelling layer, and the thinness is the point: it renews an existing floor or wall without building up height at thresholds and door frames.
- Decorative floor coatings with a trowelled finish
- Decorative wall coatings with a mottled finish
- Bars, shops, restaurants and cafeterias
- Apartments, hotels and resort complexes
- Showrooms, museums and wellness areas
- Restoring old floor and wall coverings
Build a list across products and send it once, or ask about Ultratop Loft F on WhatsApp now.
- Class
- CE EN 13813 CT C25 F10 A9 A2 S1 A2 S1 D0
- Consumption
- 0.6 to 1 kg/m² over 2 coats
- Pack we stock
- 20 kg
- Colour
- Natural, White
Mapei document 04025
About Ultratop Loft F
The coarse aggregate gives the pronounced textured look, where Ultratop Loft W gives a smoother one, and the two are commonly used together on a job. Supplied in Natural and White in 20 kg and 5 kg bags, mixed at roughly 25 to 29 parts water per 100 parts powder or directly with Ultratop Easycolor pigment, setting in about three hours at 0.3 to 0.5 kg/m² per coat. Suits UAE retail, hotel and apartment interiors.
Documentation
Related documentation
Technical data sheet
1.6 MB · PDF
Ultratop Loft F as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 2 to 4.
As published in the data sheet
30.0 to 50.0kg
- Smooth rubber or Teflon coated trowel, per coat: 0.3 to 0.5 kg/m2
- 2 coats
- over 50 m2
Order 2 to 3 packs of 20 kg bag, also boxes of 4 x 5 kg Alupacks
Taken from the Ultratop Loft F data sheet: CONSUMPTION: 0.3-0.5 kg/m2 per coat. Apply two or more coats of Ultratop Loft F with a smooth rubber or Teflon coated trowel. No site allowance is added unless you turn one on. A decorative skim quoted per coat, so the count of coats is the whole sum. The sheet says two or more coats and does not cap the number, and the finish coats of Ultratop Easycolor and the protective treatments are separate products with their own rates.
Application
Where it is used.
- 01Decorative floor coatings with a trowelled finish
- 02Decorative wall coatings with a mottled finish
- 03Bars, shops, restaurants and cafeterias
- 04Apartments, hotels and resort complexes
- 05Showrooms, museums and wellness areas
- 06Restoring old floor and wall coverings
Where it is not the right product
- As a waterproofing layer, because it is a finish and needs a membrane beneath it in wet areas
- Over a substrate that is unsound, moving or uneven, which will telegraph through the finish
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- CE EN 13813 CT C25 F10 A9 A2 S1 A2 S1 D0
| Classification | CE EN 13813 CT C25 F10 A9 A2 S1 A2 S1 D0 |
|---|---|
| Coverage | 0.3-0.5 kg/m² per coat. |
| Pack size | 20 kg, 5 kg |
| Set to light foot traffic | 3 hours |
| Colours | Natural, White |
| Mixing ratio | approx. 25-29 parts of water per 100 parts by weight of |
| Application temperature | +5°C to +35°C |
| Consistency | powder |
| Storage and shelf life | 20 kg bags: 12 months in original sealed packaging, in a dry covered area. 5 kg Alupack bags: 24 months in original sealed packaging, in a dry covered area. |
| Density | 1,100 kg/m³ |
| Dry solids | 100% |
| Ph | 11 |
Typical values as Mapei prints them in the data sheet for Ultratop Loft F. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
20 kg, 5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
approx. 25-29 parts of water per 100 parts by weight of. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
20 kg bags: 12 months in original sealed packaging, in a dry covered area. 5 kg Alupack bags: 24 months in original sealed packaging, in a dry covered area. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultratop Loft F, a microcement manufactured by Mapei, classified CE EN 13813 CT C25 F10 A9 A2 S1 A2 S1 D0. Allow 0.6 to 1 kg/m2 over 2 coats, as published by the manufacturer. Mix at approx. 25-29 parts of water per 100 parts by weight of. Supplied in 20 kg, 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultratop Loft F |
|---|---|
| Manufacturer | Mapei |
| Type | Microcement |
| Classification | CE EN 13813 CT C25 F10 A9 A2 S1 A2 S1 D0 |
| Consumption | 0.6 to 1 kg/m2 over 2 coats |
| Pack size | 20 kg, 5 kg |
| Mixing ratio | approx. 25-29 parts of water per 100 parts by weight of |
| Set time | 3 hours |
| Unit of measurement | m2 |
Frequently Asked Questions
Ultratop Loft F is classified CE EN 13813 CT C25 F10 A9 A2 S1 A2 S1 D0 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: 0.3-0.5 kg/m² per coat.
20 kg, 5 kg
You can download the official Ultratop Loft F technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Eco Prim PU 1K
View TDS and specifications

Eco Prim PU 1K Turbo
View TDS and specifications

Eco Prim T Plus
LOW ODOUR ICON ISO 16000-28
View TDS and specifications

Nivorapid
CE EN 13813c40 F10 A2 S1
View TDS and specifications

Planex HR Maxi
EN 13813 CT-C30-F6-A1FL
View TDS and specifications

Planiprep 4 LVT
View TDS and specifications
All Self Leveling and MicrocementEvery Mapei product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
Finishing floats for the thin coats microcement is built up in, and for closing the surface.
View the range
Keiser
Grinders and Polishing
Flattening between coats and taking the dust off before the next one goes on.
View the range
Keiser
Mixing Applications
Small batches mixed the same way each time, so the colour holds across the floor.
View the range
Ultratop Loft F in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultratop Loft F you need, or describe the job and we will work it out with you.