Ultratop Loft W microcement pack
Mapei's own picture. The pack we stock: 20 kg.

Mapei MicrocementNo. 23 / 24

Ultratop Loft W Technical Data Sheet (TDS)

Microcement to CE EN 13813 CT C25 F10 A9 A2 S1 A2 S1 D0.

Ultratop Loft W is the fine textured half of the Ultratop Loft microcement system, a one component cementitious paste trowelled in thin coats to form decorative floors and walls with a trowelled or mottled finish. Its aggregate is finer than that of Ultratop Loft F, so the surface reads as smoother, and the two grades are usually specified together on one job to control how much texture the finish carries.

  • Decorative floor coatings with a smooth trowelled finish
  • Decorative wall coatings with a mottled finish
  • Bars, shops, restaurants and cafeterias
  • Apartments, hotels and resort complexes
  • Showrooms, museums and wellness areas
  • Restoring old floor and wall coverings
Data sheet1.6 MB

Build a list across products and send it once, or ask about Ultratop Loft W on WhatsApp now.

Class
CE EN 13813 CT C25 F10 A9 A2 S1 A2 S1 D0
Consumption
0.6 to 1 kg/m² over 2 coats
Pack we stock
20 kg
Colour
Natural, White

About Ultratop Loft W

This is a finished surface in its own right, classified CT C25 F10 A9 with good abrasion resistance in a thin coat. It takes more water than the coarse grade, roughly 32 to 35 parts per 100 parts powder, sets in about three hours and uses 0.3 to 0.5 kg/m² per coat, in Natural and White in 20 kg and 5 kg bags. Apply between +5°C and +35°C.

Documentation

Related documentation

  • Technical data sheet

    1.6 MB · PDF

    Ultratop Loft W as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Coats

The sheet calls for 2 to 4.

As published in the data sheet

30.0 to 50.0kg

  • Smooth rubber or Teflon coated trowel, per coat: 0.3 to 0.5 kg/m2
  • 2 coats
  • over 50 m2

Order 2 to 3 packs of 20 kg bag, also boxes of 4 x 5 kg Alupacks

Send this quantity for a quote

Taken from the Ultratop Loft W data sheet: CONSUMPTION: 0.3-0.5 kg/m2 per coat. Apply two or more coats of Ultratop Loft W with a smooth rubber or Teflon coated trowel. No site allowance is added unless you turn one on. A decorative skim quoted per coat, so the count of coats is the whole sum. The sheet says two or more coats and does not cap the number, and the finish coats of Ultratop Easycolor and the protective treatments are separate products with their own rates.

Application

Where it is used.

  1. 01Decorative floor coatings with a smooth trowelled finish
  2. 02Decorative wall coatings with a mottled finish
  3. 03Bars, shops, restaurants and cafeterias
  4. 04Apartments, hotels and resort complexes
  5. 05Showrooms, museums and wellness areas
  6. 06Restoring old floor and wall coverings

Where it is not the right product

  • As a waterproofing layer, because it is a finish and needs a membrane beneath it in wet areas
  • Over a substrate that is unsound, moving or uneven, which will telegraph through the finish

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • CE EN 13813 CT C25 F10 A9 A2 S1 A2 S1 D0
Ultratop Loft W technical specifications from the manufacturer TDS
ClassificationCE EN 13813 CT C25 F10 A9 A2 S1 A2 S1 D0
Coverage0.3 - 0.5 kg/m² per coat.
Pack size20 kg, 5 kg
Set to light foot traffic3 hours
ColoursNatural, White
Mixing ratioapprox. 32-35 parts of water per 100 parts by weight of
Application temperature+5°C to +35°C
Consistencyfine powder
Storage and shelf life20 kg bags: 12 months in original sealed packaging, in a dry covered area. 5 kg Alupack bags: 24 months in original sealed packaging, in a dry covered area.
Density900 kg/m³
Dry solids100 %
Ph11

Typical values as Mapei prints them in the data sheet for Ultratop Loft W. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

20 kg, 5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

approx. 32-35 parts of water per 100 parts by weight of. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Storage

20 kg bags: 12 months in original sealed packaging, in a dry covered area. 5 kg Alupack bags: 24 months in original sealed packaging, in a dry covered area. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Ultratop Loft W, a microcement manufactured by Mapei, classified CE EN 13813 CT C25 F10 A9 A2 S1 A2 S1 D0. Allow 0.6 to 1 kg/m2 over 2 coats, as published by the manufacturer. Mix at approx. 32-35 parts of water per 100 parts by weight of. Supplied in 20 kg, 5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Ultratop Loft W
ProductUltratop Loft W
ManufacturerMapei
TypeMicrocement
ClassificationCE EN 13813 CT C25 F10 A9 A2 S1 A2 S1 D0
Consumption0.6 to 1 kg/m2 over 2 coats
Pack size20 kg, 5 kg
Mixing ratioapprox. 32-35 parts of water per 100 parts by weight of
Set time3 hours
Unit of measurementm2

Frequently Asked Questions

Ultratop Loft W is classified CE EN 13813 CT C25 F10 A9 A2 S1 A2 S1 D0 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.

As per the TDS: 0.3 - 0.5 kg/m² per coat.

20 kg, 5 kg

You can download the official Ultratop Loft W technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Ultratop Loft W in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultratop Loft W you need, or describe the job and we will work it out with you.

Chat on WhatsApp