
Mapei MicrocementNo. 24 / 24
Ultratop Stucco Technical Data Sheet (TDS)
Mapei microcement.
Ultratop Stucco belongs to the polishing sequence rather than the levelling one. When a hardened Ultratop floor is dry polished with a diamond disc, the first roughing pass opens micro-porosity at the surface, and those pores have to be filled before polishing continues or the finished floor will never read as a continuous reflecting plane.
- Sealing micro-porosity on hardened Ultratop
- Dry polished Ultratop flooring
- Terrazzo alla veneziana polished effects
- Light reflecting polished floor finishes
- Colour matched grouting of Ultratop surfaces
Build a list across products and send it once, or ask about Ultratop Stucco on WhatsApp now.
- Pack we stock
- 10 kg
- Colour
- Beige Rose, Coffee, Standard Grey, White, White Cream
Mapei document 04008 · revision 12-2018
About Ultratop Stucco
This grout of special hydraulic binders does the filling, and it is made in colours that match the mortar: Beige Rose, Coffee, Standard Grey, White and White Cream. Mix 30 to 40 parts clean water per 100 parts powder to the consistency wanted and spread it with a rubber float. Supplied in 10 kg packs, applied from +5°C to +35°C, with consumption set by how porous the surface actually is. Order the colour against the Ultratop, never by eye on site.
Documentation
Related documentation
Technical data sheet
Revision 12-2018 · 1.5 MB · PDF
Ultratop Stucco as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
The sheet prints, verbatim, consumption according to the micro-porosities present on the surface of the Ultratop. There is no figure to calculate with, because the quantity depends on how porous the floor underneath turns out to be. It is supplied in 10 kg drums.
There is no area calculator for Ultratop Stucco because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.
Application
Where it is used.
- 01Sealing micro-porosity on hardened Ultratop
- 02Dry polished Ultratop flooring
- 03Terrazzo alla veneziana polished effects
- 04Light reflecting polished floor finishes
- 05Colour matched grouting of Ultratop surfaces
Where it is not the right product
- As a waterproofing layer, because it is a finish and needs a membrane beneath it in wet areas
- Over a substrate that is unsound, moving or uneven, which will telegraph through the finish
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
| Pack size | 10 kg |
|---|---|
| Set to light foot traffic | 100-150 min |
| Colours | Beige Rose, Coffee, Standard Grey, White, White Cream |
| Mixing ratio | 30-40 parts of water per 100 parts by weight of Ultratop Stucco |
| Application temperature | from +5°C to +35°C |
| Consistency | fine powder |
| Storage and shelf life | Ultratop Stucco remains stable for 12 months if stored in a dry place in its original, sealed packaging. |
| Density | 850 kg/m³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Ultratop Stucco. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
30-40 parts of water per 100 parts by weight of Ultratop Stucco. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
Ultratop Stucco remains stable for 12 months if stored in a dry place in its original, sealed packaging. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Ultratop Stucco, a microcement manufactured by Mapei. Mix at 30-40 parts of water per 100 parts by weight of Ultratop Stucco. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Ultratop Stucco |
|---|---|
| Manufacturer | Mapei |
| Type | Microcement |
| Pack size | 10 kg |
| Mixing ratio | 30-40 parts of water per 100 parts by weight of Ultratop Stucco |
| Set time | 100-150 min |
| Unit of measurement | m2 |
Frequently Asked Questions
10 kg
You can download the official Ultratop Stucco technical data sheet as a PDF directly from this page, revision 12-2018, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Eco Prim PU 1K
View TDS and specifications

Eco Prim PU 1K Turbo
View TDS and specifications

Eco Prim T Plus
LOW ODOUR ICON ISO 16000-28
View TDS and specifications

Nivorapid
CE EN 13813c40 F10 A2 S1
View TDS and specifications

Planex HR Maxi
EN 13813 CT-C30-F6-A1FL
View TDS and specifications

Planiprep 4 LVT
View TDS and specifications
All Self Leveling and MicrocementEvery Mapei product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
Finishing floats for the thin coats microcement is built up in, and for closing the surface.
View the range
Keiser
Grinders and Polishing
Flattening between coats and taking the dust off before the next one goes on.
View the range
Keiser
Mixing Applications
Small batches mixed the same way each time, so the colour holds across the floor.
View the range
Ultratop Stucco in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Ultratop Stucco you need, or describe the job and we will work it out with you.