Adesilex P10 tile adhesive pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Tile AdhesiveNo. 01 / 54

Adesilex P10 Technical Data Sheet (TDS)

Tile Adhesive to C2TE.

Adesilex P10 is a white cementitious adhesive from Mapei, classified C2TE under EN 12004, developed for glass, ceramic and marble mosaic. Its bright white colour keeps translucent glass mosaic true to tone, while the no slip, extended open time formulation lets installers work from the top of a wall downwards without tiles moving.

  • Bonding glass, ceramic and marble mosaic on floors and walls
  • Wall installation from the top downwards without slip
  • Swimming pools when mixed with Isolastic latex
  • Mosaic on non planar substrates
  • Interior and exterior mosaic over renders, screeds and primed gypsum
Data sheet4.1 MB

Build a list across products and send it once, or ask about Adesilex P10 on WhatsApp now.

Class
C2TE
Consumption
2 to 5 kg/m²
Pack we stock
25 kg
Colour
white

Mapei document 00110 · revision 5-2014

About Adesilex P10

It bonds normal and heavy weight mesh backed or paper faced mosaic on interior and exterior floors and walls, including non planar surfaces, and suits swimming pools when mixed with Isolastic latex in place of water. Cementitious renders, screeds and primed gypsum are all suitable substrates. For UAE pool and spa projects, Adesilex P10 is the standard specification for glass mosaic. The full technical data sheet is available for download on this page.

Documentation

Related documentation

  • Technical data sheet

    Revision 5-2014 · 4.1 MB · PDF

    Adesilex P10 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

How it is being applied

As published in the data sheet

200 to 250kg

  • Ceramic tiles, trowel n. 5 or 6: 4 to 5 kg/m2
  • over 50 m2

Order 8 to 10 packs of 25 kg bag

Send this quantity for a quote

Taken from the Adesilex P10 data sheet: CONSUMPTION: bonding mosaics (trowel n. 4) 2 kg/m2, bonding ceramic tiles (trowel n. 5 or 6) 4-5 kg/m2. No site allowance is added unless you turn one on. This sheet prints only two rows and puts trowels No. 5 and No. 6 together on one of them, so there is no separate large format figure. For exterior floors and large formats work to the top of the printed band.

Application

Where it is used.

  1. 01Bonding glass, ceramic and marble mosaic on floors and walls
  2. 02Wall installation from the top downwards without slip
  3. 03Swimming pools when mixed with Isolastic latex
  4. 04Mosaic on non planar substrates
  5. 05Interior and exterior mosaic over renders, screeds and primed gypsum

Where it is not the right product

  • On heated screeds or substrates that move, where an S1 or S2 deformable grade is required
  • On external walls, where a cementitious plaster is required
  • In bathrooms, kitchens or any permanently wet area

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • C2TE
  • EN 12004 and ISO 13007
  • EMICODE EC1 R PLUS - very low emission
Adesilex P10 technical specifications from the manufacturer TDS
ClassificationC2TE
CoverageBonding mosaics (trowel n. 4): 2 kg/m² Bonding ceramic tiles (trowel n. 5 or 6): 4-5 kg/m²
Pack size25 kg
Pot lifeapprox. 8 hours
Open time> 30 minutes
Adjustment timeapprox. 45 minutes
Set to light foot traffic24 hours
Colourswhite
Mixing ratio35-37 parts water for 100 parts of Adesilex P10 or 18 parts
Bond strengthin compliance with EN 1348 (N/mm²)
Application temperaturefrom +5°C to +40°C
Consistencyvery creamy
Storage and shelf lifeWhen stored in dry conditions in the original, unopened bags, Adesilex P10 has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced.
EMICODEEC1 R PLUS - very low emission
Ph13
Density1,350 kg/m³
Dry solids100 %

Typical values as Mapei prints them in the data sheet for Adesilex P10. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

35-37 parts water for 100 parts of Adesilex P10 or 18 parts. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

approx. 8 hours. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

When stored in dry conditions in the original, unopened bags, Adesilex P10 has a shelf life of 12 months. If stored at high temperature and or high humidity conditions the shelf life may be reduced. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Adesilex P10, a tile adhesive manufactured by Mapei, classified C2TE. Allow 2 to 5 kg/m2, as published by the manufacturer. Mix at 35-37 parts water for 100 parts of Adesilex P10 or 18 parts. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Adesilex P10
ProductAdesilex P10
ManufacturerMapei
TypeTile Adhesive
ClassificationC2TE
Consumption2 to 5 kg/m2
Pack size25 kg
Mixing ratio35-37 parts water for 100 parts of Adesilex P10 or 18 parts
Set time24 hours
Pot lifeapprox. 8 hours
Open time> 30 minutes
Unit of measurementm2

Frequently Asked Questions

Adesilex P10 is classified C2TE according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: Bonding mosaics (trowel n. 4): 2 kg/m² Bonding ceramic tiles (trowel n. 5 or 6): 4-5 kg/m²

25 kg

You can download the official Adesilex P10 technical data sheet as a PDF directly from this page, revision 5-2014, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Adesilex P10 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Adesilex P10 you need, or describe the job and we will work it out with you.

Chat on WhatsApp