Granirapid tile adhesive pack
Mapei's own picture. The pack we stock: 30.5 kg.

Mapei Tile AdhesiveNo. 07 / 54

Granirapid Technical Data Sheet (TDS)

Tile Adhesive to C2F S1.

Granirapid is a two component, fast setting and hydrating cementitious adhesive system from Mapei, classified C2F S1 under EN 12004. Component A powder and component B latex are mixed on site to produce a deformable, high performance bed for ceramic tiles, agglomerates, artificial stone, marble and natural stone on walls and floors, inside and outside.

  • Fast track bonding of marble, granite and natural stone on walls and floors
  • Installing ceramic tiles, agglomerates and artificial stone indoors and outdoors
  • Refurbishment work where areas must reopen quickly
  • Bonding rubber flooring on cementitious substrates in heavy traffic areas
  • Moisture sensitive stone that benefits from fast water binding
Data sheet5.2 MB

Build a list across products and send it once, or ask about Granirapid on WhatsApp now.

Class
C2F S1
Consumption
2.5 to 8 kg/m²
Pack we stock
30.5 kg
Colour
Grey, White

Mapei document 00113 · revision 4-2021

About Granirapid

Its rapid strength development allows grouting after only a few hours and full service quickly afterwards, which makes it a standard choice for marble and granite works, refurbishments and areas that cannot stay closed for long. It also bonds rubber flooring on cementitious substrates in heavy traffic environments. The UAE edition of the Granirapid technical data sheet with mixing ratios, times and consumption is available for download on this page.

Documentation

Related documentation

  • Technical data sheet

    Revision 4-2021 · 5.2 MB · PDF

    Granirapid as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Trowel or method

As published in the data sheet

175 to 200kg

  • Normal sizes, trowel No. 5: 3.5 to 4 kg/m2
  • over 50 m2

Order 6 to 7 packs of 30.5 kg grey pack, part A 25 kg bag plus part B 5.5 kg drum

Send this quantity for a quote

Taken from the Granirapid data sheet: CONSUMPTION: mosaics and small sizes in general (trowel No. 4) 2.5-3 kg/m2, normal sizes (trowel No. 5) 3.5-4 kg/m2, large sizes, exterior floors (trowel No. 6) 5-6 kg/m2, uneven tile backs and uneven surfaces, natural stones (trowel No. 10) 8 kg/m2 or more. Rate is for the mixed A plus B product. No site allowance is added unless you turn one on. Two component. The figures are for the mixed product, part A powder plus part B latex, so a pack is the whole unit. Grey is a 30.5 kg pack, white is a 28 kg pack with a 22.5 kg part A bag, so change the pack size if you quote white. The trowel No. 10 row is open ended, the sheet says 8 kg/m2 or more.

Application

Where it is used.

  1. 01Fast track bonding of marble, granite and natural stone on walls and floors
  2. 02Installing ceramic tiles, agglomerates and artificial stone indoors and outdoors
  3. 03Refurbishment work where areas must reopen quickly
  4. 04Bonding rubber flooring on cementitious substrates in heavy traffic areas
  5. 05Moisture sensitive stone that benefits from fast water binding

Specification

Technical data.

  • C2F S1
  • EN 12004 and ISO 13007
  • EMICODE EC1 PLUS - very low emission
Granirapid technical specifications from the manufacturer TDS
ClassificationC2F S1
CoverageMosaics and small sizes in general (trowel No. 4): 2.5-3 kg/m² Normal sizes (trowel No. 5): 3.5-4 kg/m² Large sizes, exterior floors (trowel No. 6): 5-6 kg/m² Uneven tile backs and uneven surfaces, natural stones (trowel No. 10): 8 kg/m² or more.
Pack size30.5 kg, 28 kg
Pot life45 min
Open timeapprox. 20 min
Set to light foot trafficafter 3-4 h
Waiting time before groutingafter 3 h
ColoursGrey, White
Bond strengthstrength according to EN1348 (N/mm²)
Application temperaturefrom +5°C to +40°C
Consistencywhite or grey powder
Storage and shelf lifeGranirapid Part A can be stored 12 months in original unopened packing in a dry place. Granirapid Part B can be stored 24 months. Protect from frost. Overlaying ceramic tiling with an agglomerate mix using with grey Granirapid
EMICODEEC1 PLUS - very low emission
Ph10
Density1.3 g/cm³
Dry solids100 %

Typical values as Mapei prints them in the data sheet for Granirapid. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

30.5 kg, 28 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Working time

45 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

Granirapid Part A can be stored 12 months in original unopened packing in a dry place. Granirapid Part B can be stored 24 months. Protect from frost. Overlaying ceramic tiling with an agglomerate mix using with grey Granirapid in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Granirapid, a tile adhesive manufactured by Mapei, classified C2F S1. Allow 2.5 to 8 kg/m2, as published by the manufacturer. Supplied in 30.5 kg, 28 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Granirapid
ProductGranirapid
ManufacturerMapei
TypeTile Adhesive
ClassificationC2F S1
Consumption2.5 to 8 kg/m2
Pack size30.5 kg, 28 kg
Set timeafter 3-4 h
Pot life45 min
Open timeapprox. 20 min
Unit of measurementm2

Frequently Asked Questions

Granirapid is classified C2F S1 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: Mosaics and small sizes in general (trowel No. 4): 2.5-3 kg/m² Normal sizes (trowel No. 5): 3.5-4 kg/m² Large sizes, exterior floors (trowel No. 6): 5-6 kg/m² Uneven tile backs and uneven surfaces, natural stones (trowel No. 10): 8 kg/m² or more.

30.5 kg, 28 kg

You can download the official Granirapid technical data sheet as a PDF directly from this page, revision 4-2021, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Granirapid in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Granirapid you need, or describe the job and we will work it out with you.

Chat on WhatsApp