
Mapei Tile AdhesiveNo. 08 / 54
Isolastic Technical Data Sheet (TDS)
Mapei tile adhesive.
Mixed in place of water, Isolastic turns an ordinary Mapei cementitious adhesive into a deformable one. Mapei states that Kerabond T, a C1T bag on its own, reaches class C2ES2 when gauged with this latex rather than water, so the real decision is whether to stock one adhesive plus an additive or several pre-blended grades.
- Upgrading Kerabond grade adhesives to deformable class
- Heavy natural stone and large tiles
- Substrates that move under load or heat
- Diluted one to one for intermediate performance
- Wall and floor tiling, interior and exterior
Build a list across products and send it once, or ask about Isolastic on WhatsApp now.
- Consumption
- 0.3 to 2 kg/m²
- Pack we stock
- 5 kg
- Colour
- pinkish white
Mapei document 00112
About Isolastic
The additive route suits a mixed specification: full strength for heavy stone and movement, diluted one part to one with water for lighter work, plain water for straightforward ceramic. Working figures follow the adhesive, with open time of 20 to 30 minutes, around 45 minutes to adjust a tile and wall joints ready for grouting after 4 to 8 hours. A pinkish white liquid in 5 and 25 kg tanks, usable from 5 to 40 degrees, stable for 24 months.
Documentation
Related documentation
Technical data sheet
1.0 MB · PDF
Isolastic as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
65.0 to 85.0kg
- Medium-sized tiles, Isolastic undiluted: 1.3 to 1.7 kg/m2
- over 50 m2
Order 3 to 4 packs of 25 kg tank
Taken from the Isolastic data sheet: CONSUMPTION table, Isolastic column: mosaic and small tiles 0.7-1 kg/m2 undiluted or 0.3-0.5 kg/m2 diluted 1:1 with water; medium-sized tiles 1.3-1.7 kg/m2 undiluted or 0.6-0.9 kg/m2 diluted 1:1; large-sized tiles over 2 kg/m2 undiluted or over 1 kg/m2 diluted 1:1. No site allowance is added unless you turn one on. Isolastic is the latex that replaces the mixing water in Kerabond Easy, Kerabond, Kerabond T, Kerabond Plus or Adesilex P10, so this figure is only the latex and you still have to order the powder. The powder column of the same table is quoted in the hint for each row. The two large-sized rows are open ended, the sheet prints over 2 and over 1 kg/m2. Also supplied in 5 kg tanks.
Application
Where it is used.
- 01Upgrading Kerabond grade adhesives to deformable class
- 02Heavy natural stone and large tiles
- 03Substrates that move under load or heat
- 04Diluted one to one for intermediate performance
- 05Wall and floor tiling, interior and exterior
Specification
Technical data.
- EN 12004 and ISO 13007
- EMICODE EC1 Plus - very low emission
| Coverage | Product Consumption (kg/m²) powder Isolastic water Mosaic and small tiles Kerabond Easy/Kerabond/Kerabond T/ Kerabond Plus + Isolastic 2-3 0.7-1 - Kerabond Easy/Kerabond/Kerabond T/ Kerabond Plus/Adesilex P10 + Isolastic diluted 1 : 1 with water 2-3 0.3-0.5 0.3-0.5 Medium-sized tiles Kerabond Easy/K |
|---|---|
| Pack size | 25 and 5 kg tanks. |
| Pot life | 8 hours |
| Open time | 20-30 minuti 30 minutes |
| Adjustment time | approx. 45 minutes 45 minutes |
| Set to light foot traffic | 24 hours |
| Waiting time before grouting | wall joints: after 4-8 hours after 4-8 hours |
| Colours | pinkish white |
| Mixing ratio | 100 : 33 100 : 36 (18 parts of water and 18 |
| Application temperature | from +5°C to +40°C |
| Consistency | fluid liquid |
| Storage and shelf life | Isolastic can be stored for 24 months in the original packing. Protect from frost. |
| EMICODE | EC1 Plus - very low emission |
| Density | 1.03 g/cm³ |
| Dry solids | 32.5% |
| Ph | 5-6 |
Typical values as Mapei prints them in the data sheet for Isolastic. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 and 5 kg tanks.. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
100 : 33 100 : 36 (18 parts of water and 18. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
8 hours. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
Isolastic can be stored for 24 months in the original packing. Protect from frost. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Isolastic, a tile adhesive manufactured by Mapei. Allow 0.3 to 2 kg/m2, as published by the manufacturer. Mix at 100 : 33 100 : 36 (18 parts of water and 18. Supplied in 25 and 5 kg tanks.. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Isolastic |
|---|---|
| Manufacturer | Mapei |
| Type | Tile Adhesive |
| Consumption | 0.3 to 2 kg/m2 |
| Pack size | 25 and 5 kg tanks. |
| Mixing ratio | 100 : 33 100 : 36 (18 parts of water and 18 |
| Set time | 24 hours |
| Pot life | 8 hours |
| Open time | 20-30 minuti 30 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Product Consumption (kg/m²) powder Isolastic water Mosaic and small tiles Kerabond Easy/Kerabond/Kerabond T/ Kerabond Plus + Isolastic 2-3 0.7-1 - Kerabond Easy/Kerabond/Kerabond T/ Kerabond Plus/Adesilex P10 + Isolastic diluted 1 : 1 with water 2-3 0.3-0.5 0.3-0.5 Medium-sized tiles Kerabond Easy/K
25 and 5 kg tanks.
You can download the official Isolastic technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
Notched trowels comb the bed to an even depth, so the coverage under the tile is the coverage on the sheet.
View the range
Keiser
Mixing Applications
A paddle mix at the water ratio the sheet states is where the open time and the grab come from.
View the range
Peygran
Levelling
Levelling clips and wedges hold two tiles flush to each other while the adhesive sets.
View the range
Montolit
Masterpiuma P5
Cuts large format porcelain to the setting out line before the bed goes down.
View the range
Isolastic in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Isolastic you need, or describe the job and we will work it out with you.