
Mapei Tile AdhesiveNo. 04 / 54
Adesilex P9 Express Technical Data Sheet (TDS)
Tile Adhesive to C2FT.
Speed without slip is what Adesilex P9 Express is sold on, an improved, fast setting, slip resistant cementitious adhesive of class C2FT to ISO 13007-1. It carries ceramic, porcelain and mosaic indoors and out on floors, walls and ceilings, takes tile over tile up to 900 square centimetres, and holds heavy or large format tiles on a vertical surface without sagging.
- Interior and exterior ceramic, porcelain and mosaic on floors, walls and ceilings
- Stone materials that are not sensitive to moisture
- Conventional renders, cementitious mortar walls and cured screeds
- Gypsum, anhydrite and building board after priming
- Underfloor heating and cooling installations
- Tile over tile on existing floors up to 900 square centimetres
Build a list across products and send it once, or ask about Adesilex P9 Express on WhatsApp now.
- Class
- C2FT
- Consumption
- 2 to 4 kg/m²
- Pack we stock
- 25 kg
- Colour
- grey
Mapei document 02830 · revision 3-2012
About Adesilex P9 Express
The programme is the reason to pay for it: 60 minutes of workability, wall joints grouted after 4 hours, floor joints after 6, light foot traffic at about 6 hours and full use after about 3 days. Open time is 20 minutes, and the sheet warns that strong sunlight, a drying wind or high temperature can cut that to a few minutes, so on a UAE site shade the bed and rework any skin with the notched trowel instead of wetting it.
Documentation
Related documentation
Technical data sheet
Revision 3-2012 · 2.3 MB · PDF
Adesilex P9 Express as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
As published in the data sheet
125 to 150kg
- Normal sizes, trowel n. 5: 2.5 to 3 kg/m2
- over 50 m2
Order 5 to 6 packs of 25 kg bag
Taken from the Adesilex P9 Express data sheet: CONSUMPTION: bonding ceramic tiles, mosaics and small sizes in general (trowel n. 4) 2 kg/m2, normal sizes (trowel n. 5) 2.5-3 kg/m2, large sizes, exterior floors (trowel n. 6) 4 kg/m2. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Interior and exterior ceramic, porcelain and mosaic on floors, walls and ceilings
- 02Stone materials that are not sensitive to moisture
- 03Conventional renders, cementitious mortar walls and cured screeds
- 04Gypsum, anhydrite and building board after priming
- 05Underfloor heating and cooling installations
- 06Tile over tile on existing floors up to 900 square centimetres
Where it is not the right product
- On heated screeds or substrates that move, where an S1 or S2 deformable grade is required
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- C2FT
- EN 12004 and ISO 13007
- EMICODE EC1 R - very low emission
| Classification | C2FT |
|---|---|
| Coverage | Bonding ceramic tiles: - Mosaics and small sizes in general (trowel n. 4): 2 kg/m² - Normal sizes (trowel n. 5): 2.5-3 kg/m² - Large sizes, exterior floors (trowel n. 6): 4 kg/m² |
| Pack size | grey in 25 kg bags |
| Pot life | 60 minutes |
| Set to light foot traffic | after 6 hours |
| Waiting time before grouting | on walls: after 4 hours |
| Colours | grey |
| Mixing ratio | 21-23 parts of water per 100 parts of Adesilex P9 Express |
| Application temperature | from +5°C to +40°C |
| Consistency | powder |
| Storage and shelf life | When stored in dry conditions in the original, unopened bags, Adesilex P9 Express has a shelf life of 12 months. If stored at high temperatures and or high humidity conditions the shelf life may be reduced. |
| EMICODE | EC1 R - very low emission |
| Ph | 13 |
| Density | 1300 kg/m³ |
Typical values as Mapei prints them in the data sheet for Adesilex P9 Express. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
grey in 25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
21-23 parts of water per 100 parts of Adesilex P9 Express. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
60 minutes. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
When stored in dry conditions in the original, unopened bags, Adesilex P9 Express has a shelf life of 12 months. If stored at high temperatures and or high humidity conditions the shelf life may be reduced. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Adesilex P9 Express, a tile adhesive manufactured by Mapei, classified C2FT. Allow 2 to 4 kg/m2, as published by the manufacturer. Mix at 21-23 parts of water per 100 parts of Adesilex P9 Express. Supplied in grey in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Adesilex P9 Express |
|---|---|
| Manufacturer | Mapei |
| Type | Tile Adhesive |
| Classification | C2FT |
| Consumption | 2 to 4 kg/m2 |
| Pack size | grey in 25 kg bags |
| Mixing ratio | 21-23 parts of water per 100 parts of Adesilex P9 Express |
| Set time | after 6 hours |
| Pot life | 60 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
Adesilex P9 Express is classified C2FT according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.
As per the TDS: Bonding ceramic tiles: - Mosaics and small sizes in general (trowel n. 4): 2 kg/m² - Normal sizes (trowel n. 5): 2.5-3 kg/m² - Large sizes, exterior floors (trowel n. 6): 4 kg/m²
grey in 25 kg bags
You can download the official Adesilex P9 Express technical data sheet as a PDF directly from this page, revision 3-2012, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Eco Prim Grip Plus
View TDS and specifications

Fugolastic
CG2
View TDS and specifications

Granirapid
C2F S1
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
Notched trowels comb the bed to an even depth, so the coverage under the tile is the coverage on the sheet.
View the range
Keiser
Mixing Applications
A paddle mix at the water ratio the sheet states is where the open time and the grab come from.
View the range
Peygran
Levelling
Levelling clips and wedges hold two tiles flush to each other while the adhesive sets.
View the range
Montolit
Masterpiuma P5
Cuts large format porcelain to the setting out line before the bed goes down.
View the range
Adesilex P9 Express in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Adesilex P9 Express you need, or describe the job and we will work it out with you.