Fugolastic grout pack
Mapei's own picture. The pack we stock: 10 kg.

Mapei GroutNo. 06 / 54

Fugolastic Technical Data Sheet (TDS)

Grout to CG2.

Where a cement joint has to hold its colour and resist absorption, Fugolastic is the liquid polymer gauged into the Keracolor grout range in place of mixing water. It takes the joint to CG2, the improved cementitious class, without moving to a reactive product.

  • Polymer modification of Keracolor grouts
  • Joints needing reduced water absorption
  • Bathrooms, kitchens and other wet areas
  • Colour stable joints on floors and walls
  • Commercial and residential tiling at volume
Data sheet1.7 MB

Build a list across products and send it once, or ask about Fugolastic on WhatsApp now.

Class
CG2
Pack we stock
10 kg
Colour
white

Mapei document 00133

About Fugolastic

The alternative inside the Mapei range is Kerapoxy, and that is the right answer only when the joint faces chemical attack or constant aggressive cleaning. For a bathroom, a villa floor or a mall concourse, a polymer modified cement joint is easier to place, easier to clean off the tile face and far cheaper per square metre. Pot life is around two hours and the joint sets in 24 hours. Supplied as a white liquid in 10 and 25 kg packs, used between 5 and 35 degrees, with 24 months of shelf life.

Documentation

Related documentation

  • Technical data sheet

    1.7 MB · PDF

    Fugolastic as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

As published in the data sheet

The sheet gives no rate of its own. Fugolastic is a latex additive for Keracolor grouts and its CONSUMPTION line reads: the consumption of Fugolastic depends on the consumption of Keracolor. Size the Keracolor first, then dose the Fugolastic from the Keracolor sheet.

There is no area calculator for Fugolastic because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.

Application

Where it is used.

  1. 01Polymer modification of Keracolor grouts
  2. 02Joints needing reduced water absorption
  3. 03Bathrooms, kitchens and other wet areas
  4. 04Colour stable joints on floors and walls
  5. 05Commercial and residential tiling at volume

Where it is not the right product

  • Where the joint meets chemicals or constant water, which calls for an epoxy grout

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • CG2
  • EN 13888 and ISO 13007
Fugolastic technical specifications from the manufacturer TDS
ClassificationCG2
Pack size10 kg, 25 kg
Pot lifeapprox. 2 hours
Set to light foot traffic24 hours
Colourswhite
Mixing ratio28-30 : 100 18-20 : 100 33-35 : 100
Application temperaturefrom +5°C to +35°C
Consistencyliquid: liquido
Storage and shelf lifeFugolastic can be stored for at least 24 months in a dry place in original packaging. Protect Fugolastic from frost during transportation and storage.
Ph8.5
Water absorptionWater absorption after 240' (g) (EN 12808-5)
Density1.01 g/cm³
Dry solids10 %

Typical values as Mapei prints them in the data sheet for Fugolastic. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

10 kg, 25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

28-30 : 100 18-20 : 100 33-35 : 100. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

approx. 2 hours. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

Fugolastic can be stored for at least 24 months in a dry place in original packaging. Protect Fugolastic from frost during transportation and storage. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Fugolastic, a grout manufactured by Mapei, classified CG2. Mix at 28-30 : 100 18-20 : 100 33-35 : 100. Supplied in 10 kg, 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Fugolastic
ProductFugolastic
ManufacturerMapei
TypeGrout
ClassificationCG2
Pack size10 kg, 25 kg
Mixing ratio28-30 : 100 18-20 : 100 33-35 : 100
Set time24 hours
Pot lifeapprox. 2 hours
Unit of measurementm2

Frequently Asked Questions

Fugolastic is classified CG2 according to EN 13888 and ISO 13007, as stated in the manufacturer's technical data sheet.

10 kg, 25 kg

You can download the official Fugolastic technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Fugolastic in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Fugolastic you need, or describe the job and we will work it out with you.

Chat on WhatsApp