
Mapei PrimerNo. 05 / 54
Eco Prim Grip Plus Technical Data Sheet (TDS)
Mapei primer.
Smooth, low absorbency substrates are where a cementitious adhesive has nothing to key into, and Eco Prim Grip Plus exists to give it something. It is a grey, creamy bonding promoter for renders, smoothing compounds and cementitious adhesives, used indoors and outdoors on walls and floors, and it is the primer specified when tiles go over existing tiles.
- Laying tiles over existing tiles
- Priming smooth, low absorbency substrates
- Under cementitious tile adhesives
- Under renders and smoothing compounds
- Interior and exterior walls and floors
Build a list across products and send it once, or ask about Eco Prim Grip Plus on WhatsApp now.
- Consumption
- 0.2 to 0.3 kg/m²
- Pack we stock
- 10 kg
- Colour
- grey
Mapei document 02946
About Eco Prim Grip Plus
Worth separating from a thinned primer for dusty or absorbent screeds: that job is suction control, this one is grip on a closed surface, and the two are not interchangeable. Consumption sits between 0.20 and 0.30 kg per square metre according to absorption, from a 10 kg pack. Odourless and solvent free with EC1 Plus very low VOC emissions, which matters on a fit out running alongside occupied floors. Apply between 5 and 35 degrees.
Documentation
Related documentation
Technical data sheet
1.3 MB · PDF
Eco Prim Grip Plus as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
10.0 to 15.0kg
- As printed: 0.2 to 0.3 kg/m2
- 1 coat
- over 50 m2
Order 1 pack of 20 kg drum
Taken from the Eco Prim Grip Plus data sheet: CONSUMPTION: consumption varies between 0.20 and 0.30 kg/m2 according to the absorption of the substrate. No site allowance is added unless you turn one on. Ready to use, no dilution is required. Also available in 10 kg, 5 kg and 1 kg drums. The sheet prints a single range of 0.2 to 0.3 and no substrate table, so the calculator offers the range rather than splitting it into rows the manufacturer never published.
Application
Where it is used.
- 01Laying tiles over existing tiles
- 02Priming smooth, low absorbency substrates
- 03Under cementitious tile adhesives
- 04Under renders and smoothing compounds
- 05Interior and exterior walls and floors
Specification
Technical data.
- EMICODE EC1 Plus - very low VOC emissions
| Coverage | Consumption varies between 0.20 and 0.30 kg/m² according to the absorption of the substrate. |
|---|---|
| Pack size | 10 kg |
| Set to light foot traffic | 15-20 minutes |
| Colours | grey |
| Application temperature | from +5°C to +35°C |
| Consistency | creamy liquid |
| Storage and shelf life | Eco Prim Grip Plus remains stable for at least 12 months under normal conditions in its original, sealed packaging. |
| EMICODE | EC1 Plus - very low VOC emissions |
| Density | 1.46 g/cm³ |
| Dry solids | 70 % |
| Ph | 8.5 |
Typical values as Mapei prints them in the data sheet for Eco Prim Grip Plus. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Eco Prim Grip Plus remains stable for at least 12 months under normal conditions in its original, sealed packaging. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Eco Prim Grip Plus, a primer manufactured by Mapei. Allow 0.2 to 0.3 kg/m2, as published by the manufacturer. Supplied in 10 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Eco Prim Grip Plus |
|---|---|
| Manufacturer | Mapei |
| Type | Primer |
| Consumption | 0.2 to 0.3 kg/m2 |
| Pack size | 10 kg |
| Set time | 15-20 minutes |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Consumption varies between 0.20 and 0.30 kg/m² according to the absorption of the substrate.
10 kg
You can download the official Eco Prim Grip Plus technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex P10
C2TE
View TDS and specifications

Adesilex P7
C2T
View TDS and specifications

Adesilex P9
C2TE
View TDS and specifications

Adesilex P9 Express
C2FT
View TDS and specifications

Fugolastic
CG2
View TDS and specifications

Granirapid
C2F S1
View TDS and specifications
All Tile Adhesives and GroutsEvery Mapei product and the distributor page
Eco Prim Grip Plus in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Eco Prim Grip Plus you need, or describe the job and we will work it out with you.

